TRF37C32EVM
TRF37C32 評估模組
TRF37C32EVM
概覽
TRF37x32 是一款具有整合式 IF 放大器的寬頻雙降頻轉換器混頻器。此裝置針對單端 RF 和 LO 輸入採用了整合式平衡不平衡轉換器。IF 放大器在 30MHz 至 500MHz 範圍內以開路集極拓撲運作,以支援各種 IF 頻率和頻寬。TRF37x32 提供優異的混頻器雜散性能,並在各通道之間提供良好的隔離,以便在分集應用中運作。此裝置以極低的功耗運作,並進一步為對功耗敏感的應用提供低功耗模式的選項。每個通道皆可獨立斷電並具有快速的反應時間,允許在 TDD 應用中運作。
特點
- 10dB 的增益
- 雜訊指數 9.5dB
- 單端 RF 輸入
- 從單一 3.3V 電源供電
- 每通道 500mW 功耗
降頻轉換混合器
訂購並開始開發
TRF37C32EVM — TRF37C32 評估模組
TRF37C32EVM — TRF37C32 評估模組
RF-CASCADE-CALC-TOOL — TI RF 級聯計算機
支援產品和硬體
產品
IQ 解調器
IQ 調變器
RF PLL 與合成器
RF 低雜訊放大器 (LNA)
RF 全差動放大器 (FDA)
RF 前端模組
RF 可變增益放大器 (VGA)
其它無線產品
射頻增益區塊放大器
汽車無線連線產品
降頻轉換混合器
硬體開發
開發套件
開發板
RF-CASCADE-CALC-TOOL — TI RF 級聯計算機
TI RF cascade calculator
產品
IQ 解調器
IQ 調變器
RF PLL 與合成器
RF 低雜訊放大器 (LNA)
RF 全差動放大器 (FDA)
RF 前端模組
RF 可變增益放大器 (VGA)
其它無線產品
射頻增益區塊放大器
汽車無線連線產品
降頻轉換混合器
硬體開發
開發套件
開發板
版本資訊
Overview
The RF Cascade Calculator is a web-based tool for performing RF signal chain (lineup) cascade analysis. It computes cascaded performance parameters across a multi-stage RF signal chain using standard cascade equations (Friis formula for noise figure, reciprocal power sums for IP3/IP2/P1dB, etc.).
The tool is hosted on the TI Developer Gallery and runs entirely in the user's browser — no software download or installation is required.
Features (v1.0.0)
RF Cascade Analysis
- Support for up to 10 cascaded stages
- Per-stage input parameters: Name, Gain, OIP3, OIP2, NF, OP1dB
- Configurable source power, source frequency, and analysis bandwidth
- Dynamic stage count (add/remove stages on the fly)
Cascade Calculations (Friis and Standard Cascade Equations)
- Cascade Gain (cumulative sum)
- Cascade Noise Figure
- Cascade OIP3
- Cascade OIP2
- Cascade OP1dB
- Output Power (Pout) per stage
Derived System-Level Results
- Total Cascade Gain (dB)
- Output Power / Pout (dBm)
- Cascade OIP3 / IIP3 (dBm)
- Cascade OIP2 / IIP2 (dBm)
- Cascade NF (dB)
- Cascade OP1dB / IP1dB (dBm)
- Output Noise Spectral Density / NSD (dBm/Hz)
- Output Noise Floor (dBm)
- Signal-to-Noise Ratio / SNR (dB)
- IMD3 (dBc)
- IMD2 (dBc)
- P1dB Saturation Detection with stage identification
Interactive Plot
- Dual-axis Plotly.js chart showing cascade parameters per stage
- Selectable left Y-axis parameter (Gain, OIP3, OIP2, NF, OP1dB)
- Selectable right Y-axis parameter (independent selection)
- Data-point annotations and hover tooltips
- Responsive layout
Input Validation
- Per-field validation with visual feedback (red = error, amber = warning)
- Range checking for all RF parameters
- Cross-field validation (e.g., OIP3 vs OP1dB consistency, passive NF check)
- Non-numeric and out-of-range detection
Tooltip Equations
- Hovering over any result field shows the formula and calculation breakdown
Export
- One-click CSV export of all inputs, cascade results, and derived results
- Organized into sections: Source Config, Per-Stage Inputs, Per-Stage Cascade Results, Overall Results, Derived Results, Saturation Status
新功能
- v1.0.0
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | EVM User's guide | TRF37x32 EVM User's Guide | 2014/10/24 | |||
| 證書 | TRF37C32EVM EU Declaration of Conformity (DoC) | 2019/1/2 |