TRF1108
- Differential-to-single-ended (D2S) RF amplifier
- Near-DC to 8GHz
- Gain: 15.5dB at 2GHz
- OP1dB:
- 2GHz: 12dBm
- 6GHz: 10dBm
- OIP3:
- 2GHz: 28dBm
- 6GHz: 28.5dBm
- Noise figure (NF) and input noise spectral density:
- 2GHz: 11dB and –163dBm/Hz
- 6GHz: 11.5dB and –162.5dBm/Hz
- HD2 and HD3:
- HD2 (1GHz): –60dBc at 2dBm
- HD3 (1GHz): –58dBc at 2dBm
- Additive (residual) phase noise:
- 1GHz: –154.6dBc/Hz at 10kHz offset
- Gain and phase imbalance: ±0.6dB and ±2º
- Differential input matched to 100Ω
- Single-ended output matched to 50Ω
- Power-down feature
- 5V supply
- Active current: 170mA
The TRF1108 is a very high-performance, differential-to-single-ended (D2S) amplifier optimized for radio-frequency (RF) applications. The device is an excellent choice for applications that require a D2S conversion at the output of digital-to-analog converter (DAC) such as the high-performance DAC39RF10 or AFE7950. The on-chip matching components simplify printed-circuit-board (PCB) implementation and provide the highest performance over the usable bandwidth. The device is fabricated using Texas Instruments’ advanced complementary BiCMOS process and is available in a space-saving, WQFN-FCRLF 2mm × 2mm package.
The primary use-case of the TRF1108 is in ac-coupled applications, where the device operates using a single, 5V supply with an internally set common-mode voltage that simplifies biasing. With the help of an application circuit to set the input common-mode voltage, and by using dual supplies, the amplifier can be dc-coupled. A power-down feature is also available for power savings.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TRF1108 Near-DC to 8GHz, Differential to Single-Ended RF Amplifier datasheet (Rev. A) | PDF | HTML | 2024年 11月 6日 |
| Certificate | TRF1108-DAC39RFEVM EU RoHS Declaration of Conformity (DoC) (Rev. A) | 2024年 12月 27日 | ||
| Technical article | 在發射訊號鏈設計中使用差分至單端 RF 放大器的優勢 | PDF | HTML | 2024年 8月 16日 | |
| Application brief | TRF1208, TRF1108 Active Balun Interface With Xilinx RFSoC Data Converters | PDF | HTML | 2023年 2月 21日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TRF-LSC-AFE7950EVM — 適用於 4T4R+2FB 射頻取樣 AFE 的 TRF1208、TRF1108、AFE7950 評估模組
TRF-LSC-AFE7950EVM 評估模組用於評估 TI AFE79xx 系列整合式 RF 取樣收發器的性能，其 RX 配置 TI TRF1208 單端轉差分放大器，TX 配置 TI TRF1108 差分轉單端放大器。AFE79xx 裝置支援最多四發射通道、四接收通道及兩回饋通道 (4T4R2F)，並整合用於產生資料轉換器時鐘的鎖相迴路 (PLL) 及電壓控制振盪器 (VCO)。AFE79xx 整合八個 JESD204B 及 JESD204C 相容的串聯器或解串器 (SerDes) 收發器。這些收發器可透過板載 FPGA 夾層介面卡 (FMC) 連接器，以最高 29.5 Gbps (...)
TRF1108-DAC39RFEVM — TRF1108-DAC39RF 評估模組
TRF1108-DAC39RFEVM 是一款評估板，用於評估 DAC39RF10 數位轉類比轉換器（DAC）與德州儀器 TRF1108 差分至單端 RF 放大器配對。評估模組（EVM）透過 USB 接頭和 FTDI USBto-SPI 匯流排轉換器提供裝置暫存器編程，並可選擇使用 SPI 透過 FMC+ 接頭從 FPGA 進行編程。
TRF1108EVM — TRF1108 評估模組
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| WQFN-FCRLF (RPV) | 12 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。