產品詳細資料

BB BW LP filter (min) (MHz) 0.615 BB BW LP filter (max) (MHz) 1.92 IIP3 (typ) (dBm) 21 IIP2 (typ) (dBm) 60 Rating Catalog Operating temperature range (°C) -40 to 85
BB BW LP filter (min) (MHz) 0.615 BB BW LP filter (max) (MHz) 1.92 IIP3 (typ) (dBm) 21 IIP2 (typ) (dBm) 60 Rating Catalog Operating temperature range (°C) -40 to 85
VQFN (RGZ) 48 49 mm² (7 mm × 7 mm)
  • Frequency Range: 1.7-2.0 GHz
  • Integrated Baseband Programmable Gain Amplifier
  • On Chip Programmable Baseband Filter
  • High Cascaded IP3: 21 dBm at 1.9 GHz
  • High IP2: 60 dBm at 1.9 GHz
  • Hardware and Software Power Down
  • 3-Wire Serial Programmable Interface
  • Single Supply: 4.5 V to 5.5 V Operation
  • APPLICATIONS
    • Wireless Infrastructure
      • WCDMA
      • CDMA
    • Wireless Local Loop
    • High Linearity Direct-Down Conversion Receiver

All trademarks are the property of their respective owners.

  • Frequency Range: 1.7-2.0 GHz
  • Integrated Baseband Programmable Gain Amplifier
  • On Chip Programmable Baseband Filter
  • High Cascaded IP3: 21 dBm at 1.9 GHz
  • High IP2: 60 dBm at 1.9 GHz
  • Hardware and Software Power Down
  • 3-Wire Serial Programmable Interface
  • Single Supply: 4.5 V to 5.5 V Operation
  • APPLICATIONS
    • Wireless Infrastructure
      • WCDMA
      • CDMA
    • Wireless Local Loop
    • High Linearity Direct-Down Conversion Receiver

All trademarks are the property of their respective owners.

The TRF3710 is a highly linear and integrated direct-conversion quadrature demodulator optimized for Third-Generation (3G) wireless infrastructure. The TRF3710 integrates balanced I and Q mixers, LO buffers and phase splitters to convert an RF signal directly to I and Q baseband. The on-chip programmable-gain amplifiers allow adjustment of the output signal level without the need for external variable-gain (attenuator) devices. The TRF3710 integrates programmable baseband low-pass filters that attenuate nearby interference, eliminating the need for an external baseband filter.

Housed in a 7X7mm QFN package, the TRF3710 provides the smallest and most integrated receiver solution available for high performance equipment.

The TRF3710 is a highly linear and integrated direct-conversion quadrature demodulator optimized for Third-Generation (3G) wireless infrastructure. The TRF3710 integrates balanced I and Q mixers, LO buffers and phase splitters to convert an RF signal directly to I and Q baseband. The on-chip programmable-gain amplifiers allow adjustment of the output signal level without the need for external variable-gain (attenuator) devices. The TRF3710 integrates programmable baseband low-pass filters that attenuate nearby interference, eliminating the need for an external baseband filter.

Housed in a 7X7mm QFN package, the TRF3710 provides the smallest and most integrated receiver solution available for high performance equipment.

下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 8
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 IQ Demodulator datasheet (Rev. A) 2008/2/18
技術文章 Can a clock generator act as a jitter cleaner? PDF | HTML 2017/3/23
技術文章 Don’t let bad reference signals destroy the phase noise in your PLL/synthesizer PDF | HTML 2017/1/10
技術文章 A survival guide to scaling your PLL loop filter design PDF | HTML 2016/11/22
使用指南 TSW6011EVM Quick Start Guide (Rev. D) 2016/8/17
技術文章 What to do when your PLL does not lock PDF | HTML 2016/7/12
技術文章 Issues with jitter, phase noise, lock time or spurs? Check the loop-filter bandwid PDF | HTML 2016/6/6
應用說明 DC Offset Auto-Calibration of TRF371x 2009/11/5

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

計算工具

RF-CASCADE-CALC-TOOL — TI RF 級聯計算機

A browser-based RF lineup analysis tool supporting up to 10 stages. Computes gain, NF, OIP3, OIP2, OP1dB, and derived metrics. Features dual-axis Plotly charts, P1dB saturation detection, and export to CSV
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGZ) 48 Ultra Librarian

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片