首頁 射頻 (RF) 與微波 射頻放大器 RF 全差動放大器 (FDA)
首頁
射頻 (RF) 與微波
射頻放大器
RF 全差動放大器 (FDA)
最新

TRF0213-SEP

現行

Radiation-tolerant, near-DC to 14GHz, single-ended to differential (S2D) RF Amplifier

立即訂購
產品規格表

TRF0213-SEP

現行
產品規格表 立即訂購

產品詳細資料

Type RF FDA Frequency (min) (MHz) 0.01 Frequency (max) (MHz) 14000 Gain (typ) (dB) 13.8 Noise figure (typ) (dB) 8.9 OIP3 (typ) (dBm) 31 P1dB (typ) (dBm) 13.4 Frequency of harmonic distortion measurement (GHz) 4 3rd harmonic (dBc) -55 OIP2 (typ) (dBm) 53 2nd harmonic (dBc) -53 Current consumption (mA) 174 Number of channels 1 Operating temperature range (°C) -55 to 125 Rating Catalog, Space Output enable Yes Radiation, SEL (MeV·cm2/mg) 43 Radiation, TID (typ) (rad) 30000
Type RF FDA Frequency (min) (MHz) 0.01 Frequency (max) (MHz) 14000 Gain (typ) (dB) 13.8 Noise figure (typ) (dB) 8.9 OIP3 (typ) (dBm) 31 P1dB (typ) (dBm) 13.4 Frequency of harmonic distortion measurement (GHz) 4 3rd harmonic (dBc) -55 OIP2 (typ) (dBm) 53 2nd harmonic (dBc) -53 Current consumption (mA) 174 Number of channels 1 Operating temperature range (°C) -55 to 125 Rating Catalog, Space Output enable Yes Radiation, SEL (MeV·cm2/mg) 43 Radiation, TID (typ) (rad) 30000
WQFN-FCRLF (RPV) 12 4 mm² (2 mm × 2 mm)
  • Vendor item drawing number: VID V62/25656
  • Radiation:
    • Total ionizing dose (TID)
      • Radiation hardness assurance (RHA) up to 30krad (Si) TID
      • Enhanced low dose rate sensitivity (ELDRS) free process
      • High dose rate radiation lot acceptance testing (HDR RLAT) up to 30krad (Si) TID
    • Single event effects (SEE)
      • Single event latch-up (SEL) immune to linear energy transfer (LET) of 43MeV‑cm2/mg
      • Single event transient (SET) characterized to LET of 43MeV‑cm2/mg
  • Space-enhanced plastic (Space EP, SEP)
    • Lead-free construction
    • Extended temperature range: –55°C to +125°C
  • Single-ended input, differential output
  • Excellent performance driving RF ADCs
  • Fixed 14dB gain
  • Bandwidth (3dB): >14GHz
  • Gain flatness (1dB): 12GHz
  • OIP3: 31dBm (4GHz), 31dBm (10GHz)
  • OP1dB: 13.4dBm (4GHz), 15.4dBm (10GHz)
  • NF: 8.9dB (4GHz), 10.6dB (10GHz)
  • Gain and phase imbalance: ±0.3dB and ±3º
  • Power-down feature
  • 5V single-supply operation
  • Active current: 174mA
  • Vendor item drawing number: VID V62/25656
  • Radiation:
    • Total ionizing dose (TID)
      • Radiation hardness assurance (RHA) up to 30krad (Si) TID
      • Enhanced low dose rate sensitivity (ELDRS) free process
      • High dose rate radiation lot acceptance testing (HDR RLAT) up to 30krad (Si) TID
    • Single event effects (SEE)
      • Single event latch-up (SEL) immune to linear energy transfer (LET) of 43MeV‑cm2/mg
      • Single event transient (SET) characterized to LET of 43MeV‑cm2/mg
  • Space-enhanced plastic (Space EP, SEP)
    • Lead-free construction
    • Extended temperature range: –55°C to +125°C
  • Single-ended input, differential output
  • Excellent performance driving RF ADCs
  • Fixed 14dB gain
  • Bandwidth (3dB): >14GHz
  • Gain flatness (1dB): 12GHz
  • OIP3: 31dBm (4GHz), 31dBm (10GHz)
  • OP1dB: 13.4dBm (4GHz), 15.4dBm (10GHz)
  • NF: 8.9dB (4GHz), 10.6dB (10GHz)
  • Gain and phase imbalance: ±0.3dB and ±3º
  • Power-down feature
  • 5V single-supply operation
  • Active current: 174mA

The TRF0213-SEP is a very high performance, radio frequency (RF) amplifier optimized for RF applications. This device is excellent for ac-coupled applications that require a single-ended to differential conversion when driving an RF sampling analog-to-digital converter (ADC) such as the high performance AFE7950-SEP or ADC12DJ5200-SEP. The device combines the functionality of a wide-band gain block and a wide-band passive balun. The on-chip matching components simplify printed circuit board (PCB) implementation and provide the highest performance over the usable bandwidth. The device is fabricated in Texas Instruments’ advanced complementary BiCMOS process and is available in a space-saving, WQFN-FCRLF package.

The TRF0213-SEP operates on a single-rail supply and consumes about 174mA of active current. A power-down feature is also available for power savings.

The TRF0213-SEP is a very high performance, radio frequency (RF) amplifier optimized for RF applications. This device is excellent for ac-coupled applications that require a single-ended to differential conversion when driving an RF sampling analog-to-digital converter (ADC) such as the high performance AFE7950-SEP or ADC12DJ5200-SEP. The device combines the functionality of a wide-band gain block and a wide-band passive balun. The on-chip matching components simplify printed circuit board (PCB) implementation and provide the highest performance over the usable bandwidth. The device is fabricated in Texas Instruments’ advanced complementary BiCMOS process and is available in a space-saving, WQFN-FCRLF package.

The TRF0213-SEP operates on a single-rail supply and consumes about 174mA of active current. A power-down feature is also available for power savings.
filter 尋找其它 RF 全差動放大器 (FDA)
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TRF0213-SEP Radiation Tolerant, Near-DC to > 14GHz, Single-Ended-to-Differential RF Amplifier datasheet PDF | HTML 2025/12/16
* 輻射及可靠性報告 TRF0213-SEP Total Ionizing Dose (TID) Report 2026/1/8
* 輻射及可靠性報告 TRF0213-SEP Production Flow and Reliability Report PDF | HTML 2025/10/8
* 輻射及可靠性報告 TRF0213-SEP, Radiation-Tolerant, Near-DC to >14GHz, Single-Ended-to-Differential RF Amp Single-Event Effects PDF | HTML 2025/1/8

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TRF-X-AFE7950EVM — TRF1213 和 AFE7950 評估模組

TRF-X-AFE7950EVM 評估模組用於評估 TI AFE79xx 系列整合式 RF 取樣收發器的性能，其 RX 配置 TI TRF1213 單端轉差分 (S2D) 放大器。TRF-X-AFE7950EVM 專門使用 AFE7950 收發器。AFE79xx 裝置支援最多四發射通道、四接收通道及兩回饋通道 (4T4R2F)，並整合用於產生資料轉換器時鐘的鎖相迴路 (PLL) 及電壓控制振盪器 (VCO)。AFE79xx 整合八個 JESD204B 及 JESD204C 相容的串聯器或解串器 (SerDes) 收發器。這些收發器可透過板載 FPGA 夾層介面卡 (FMC) 連接器，以最高 (...)
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

TRF0213-SEP S-Parameter Model

SLVMET2.ZIP (8 KB) - S 參數模型
支援產品和硬體
計算工具

RF-CASCADE-CALC-TOOL — TI RF 級聯計算機

A browser-based RF lineup analysis tool supporting up to 10 stages. Computes gain, NF, OIP3, OIP2, OP1dB, and derived metrics. Features dual-axis Plotly charts, P1dB saturation detection, and export to CSV
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN-FCRLF (RPV) 12 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片