CC1200
- RF Performance and Analog Features:
- High-Performance,
Single-Chip Transceiver
- Excellent Receiver Sensitivity:
- –123 dBm at 1.2 kbps
- –109 dBm at 50 kbps
- Blocking Performance: 86 dB at 10 MHz
- Adjacent Channel Selectivity: Up to 60 dB at 12.5-kHz Offset
- Very Low Phase Noise: –114 dBc/Hz at
10-kHz Offset (169 MHz)
- Excellent Receiver Sensitivity:
- Programmable Output Power Up to +16 dBm With 0.4-dB Step Size
- Automatic Output Power Ramping
- Supported
Modulation Formats:
2-FSK, 2-GFSK, 4-FSK, 4-GFSK, MSK, OOK - Supports Data Rate Up to 1.25 Mbps in Transmit and Receive
- High-Performance,
Single-Chip Transceiver
- Low Current
Consumption:
- Enhanced Wake-On-Radio (eWOR) Functionality for Automatic Low-Power Receive Polling
- Power Down: 0.12 μA (0.5 μA With eWOR Timer
Active)
- RX: 0.5 mA in RX Sniff Mode
- RX: 19 mA Peak Current in Low-Power Mode
- RX: 23 mA Peak Current in High-Performance Mode
- TX: 46 mA at +14 dBm
- Other:
- Data FIFOs: Separate 128-Byte RX and TX
- Support for Seamless Integration With the CC1190 Device for Increased Range Providing up to 3-dB Improvement in RX Sensitivity and up to +27 dBm TX Output Power
- Digital
Features:
- WaveMatch: Advanced Digital Signal Processing for Improved Sync Detect Performance
- Security: Hardware AES128 Accelerator
- Data FIFOs: Separate 128-Byte RX and TX
- Includes Functions for Antenna Diversity Support
- Support for Retransmission
- Support for Auto-Acknowledge of Received Packets
- Automatic Clear Channel Assessment (CCA) for Listen-Before-Talk (LBT) Systems
- Built-in Coding Gain Support for Increased Range and Robustness
- Digital RSSI Measurement
- Improved OOK Shaping for Less Occupied Bandwidth, Enabling Higher Output Power While Meeting Regulatory Requirements
- Dedicated Packet Handling for
802.15.4g:
- CRC 16/32
- FEC, Dual Sync Detection (FEC and non-FEC Packets)
- Whitening
- General:
- RoHS-Compliant 5-mm x 5-mm No-Lead QFN 32-Pin Package (RHB)
- Pin-Compatible With the CC1120 Device
- Regulations – Suitable for Systems Targeting
Compliance With
- Europe: ETSI EN 300 220, EN 54-25
- US: FCC CFR47 Part 15, FCC CFR47 Part 90
- Japan: ARIB STD-T30, T67, T108
The CC1200 device is a fully integrated single-chip radio transceiver designed for high performance at very low-power and low-voltage operation in cost-effective wireless systems. All filters are integrated, thus removing the need for costly external SAW and IF filters. The device is mainly intended for the ISM (Industrial, Scientific, and Medical) and SRD (Short Range Device) frequency bands at 164–190 MHz, 410–475 MHz, and 820–950 MHz.
The CC1200 device provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and Wake-On-Radio. The main operating parameters of the CC1200 device can be controlled through an SPI interface. In a typical system, the CC1200 device will be used with a microcontroller and only a few external passive components.
The CC1200 and the CC1120 devices are both part of the high-performance transceiver family. The CC1120 device is more optimized toward narrowband applications, while the CC1200 device is optimized toward wideband applications but can also effectively cover narrowband down to 12.5-kHz channels.
관심 가지실만한 유사 제품
비교 대상 장치와 유사한 기능.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
SMARTRFTRXEBK — SmartRF 트랜시버 평가 보드
The SmartRF Transceiver Evaluation Board (TrxEB) is intended to be used together with Texas Instruments’ low-power RF transceivers for evaluation, performance testing and software development.
The following transceiver evaluation modules are supported:
- CC1101EM*
- CC11xLEM*
- CC112xEM*
- CC1175EM*
- CC1200EM*
- (...)
RDCR-3P-RADIO-MOD — Radiocrafts 임베디드 라디오 모듈
CC1200DK — CC1200 개발 키트
The CC1200 development kit provides a complete platform for hardware performance testing and software development for TI's sub-1 GHz CC1200 device. The development kit comes pre-programmed with a packet error rate test for easy out-of-the-box evaluation of the RF performance of the device.
RF range (...)
CC1200EMK-420-470 — CC1200 평가 모듈 키트 420-470 MHz
The CC1200 Evaluation Module Kit for 420-470 MHz can be used in conjunction with the CC1200 Development Kit to evaluate the operation of the CC1200 in the mentioned frequency range. The CC1200DK is required for operation and needs to be ordered separately.
This CC1200 Evaluation Module Kit for (...)
CC1200EMK-868-930 — CC1200 평가 모듈 키트 868-930 MHz
The CC1200 Evaluation Module Kit for 868-930 MHz can be used in conjunction with the CC1200 Development Kit to evaluate the operation of the CC1200 in the mentioned frequency range. The CC1200DK is required for operation and needs to be ordered separately.
CC-DEBUGGER — RF SoC(System-on-Chip)를 위한 디버거이자 프로그래머
The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips. It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging and SmartRF Flash Programmer for flash programming. The CC Debugger can also be used for controlling (...)
BOOST-CCEMADAPTER — EM 어댑터 부스터팩
SWRC274 — CC120X Software Examples
RF-RANGE-ESTIMATOR — RF Range Estimator
SWRC219 — TrxEB RF PER Test Software
SMARTRF-STUDIO-7 — SmartRF Studio
SmartRF™ Studio는 RF 시스템 설계자가 모든 TI CC1xxx 및 CC2xxx 저전력 RF 장치 설계 공정의 초기 단계에 무선 기능을 손쉽게 평가할 수 있도록 지원하는 Windows 애플리케이션입니다. 구성 레지스터 값 및 명령의 생성과 RF 시스템의 실무 테스트 및 디버깅을 간소화합니다.
SmartRF Studio는 다음과 같은 TI 장치를 지원합니다.
리소스
3P-WIRELESS-MODULES — 타사 무선 모듈 검색 툴
타사 무선 모듈 검색 툴은 개발자가 완제품 사양을 충족하는 제품을 식별하고 생산 준비가 완료된 무선 모듈을 조달하는 데 유용합니다. 검색 툴에 포함되어 있는 타사 모듈 공급업체는 TI 무선 연결 제품을 사용하여 무선 모듈을 설계 및 제조하는 전문성을 갖춘 독립 회사입니다.
SIMPLELINK-SUB1GHZ-DESIGN-REVIEWS — SimpleLink™ CC1xxx 장치에 대한 하드웨어 설계 검토
SimpleLink™ 1GHz 미만 하드웨어 설계 검토 프로세스 시작하기:
- 1단계: 검토를 요청하기 전에 기술 문서 및 설계, 해당 제품 페이지에서 사용 가능한 개발 리소스를 검토하는 것이 중요합니다(아래 CC1xxx 제품 페이지 링크 참조).
- 2단계: 하드웨어 설계 검토 요청 양식을 다운로드해 작성합니다
- 3단계: 작성한 하드웨어 설계 검토 요청 양식과 필요한 문서를 함께 connectivity-sub1ghz-hw-review@list.ti.com으로 이메일로 보냅니다
SimpleLink 하드웨어 설계 검토 프로세스는 설계를 검토하고 (...)
TIDC-WMBUS-868MHZ — 스마트 유틸리티 계량기 및 열비용 분배기의 ETSI Cat2 리시버 지원 wM-Bus 868MHz RF 서브시스템
이 레퍼런스 디자인은 EN13757-4:2014에 따라 868MHz에서 가장 널리 사용되는 wM-Bus S, T 및 C 모드를 완벽하게 준수하는 스마트 미터용 ETSI 카테고리 2 수신기 지원 RF 서브시스템에 대해 설명합니다. SimpleLink RF 트랜시버 장치는 양방향 유량계, 전자 계량기 및 열 비용 분배기와 같은 wM-Bus 애플리케이션에서 업계 최고의 차단, 선택성 및 RX 감도 번호를 제공합니다. 비용 최적화된 이 설계는 저렴한 XTAL 부품을 사용하여 S2 모드에서 +-60ppm의 최악의 주파수 오프셋을 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RHB) | 32 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.