CC1020
- True Single Chip UHF RF Transceiver
- Frequency Range 402 MHz to 470 MHz
and 804 MHz to 930 MHz - High Sensitivity
- Up to –118 dBm for a 12.5 kHz Channel
- Programmable Output Power
- Low
Current Consumption
- RX: 19.9 mA
- Low Supply Voltage
- 2.3 V to 3.6 V
- No External IF Filter Needed
- Low-IF Receiver
- Very Few External Components Required
- Small Size
- QFN 32 Package
- Pb-Free Package
- Digital RSSI and Carrier Sense Indicator
- Data Rate up to 153.6 kBaud
- OOK, FSK, and GFSK Data Modulation
- Integrated Bit Synchronizer
- Image Rejection Mixer
- Programmable Frequency and AFC Make Crystal Temperature Drift Compensation Possible Without TCXO
- Suitable for Frequency Hopping Systems
- Suited for
Systems Targeting Compliance With
EN 300 220, FCC CFR47 Part 15, and
ARIB STD-T67 - Easy-to-Use Software for Generating the CC1020 Configuration Data
The CC1020 device is a true single-chip UHF transceiver designed for very low-power and very low-voltage wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific, and Medical) and SRD (Short Range Device) frequency bands at 402, 424, 426, 429, 433, 447, 449, 469, 868, and 915 MHz, but can easily be programmed for multichannel operation at other frequencies in the 402- to 470-MHz and 804- to 930-MHz range.
The CC1020 device is especially suited for narrow-band systems with channel spacing of 12.5 or 25 kHz complying with ARIB STD-T67 and EN 300 220.
The main operating parameters of the CC1020 device can be programmed with a serial bus, thus making the CC1020 device a very flexible and easy-to-use transceiver.
In a typical system, the CC1020 device will be used together with a microcontroller and a few external passive components.
TI recommends using the latest RF performance line device CC1120 as successor of the CC1020 device: www.ti.com/rfperformanceline.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | CC1020 Low-Power RF Transceiver for Narrowband Systems datasheet (Rev. I) | PDF | HTML | 2018. 8. 22 | |
| * | 정오표 | CC1020 Errata Notes | 2006. 1. 31 | ||
| * | 방사능 및 안정성 보고서 | CC1020 Reliability Report | 2006. 4. 28 | ||
| 애플리케이션 노트 | DN035 -- Antenna Quick Guide (Rev. B) | 2022. 2. 9 | |||
| 애플리케이션 노트 | DN024 -- 868 MHz, 915 MHz and 955 MHz Monopole PCB Antenna (Rev. E) | 2013. 2. 22 | |||
| 애플리케이션 노트 | AN098 - Layout Review Techniques for Low Power RF Designs (Rev. A) | 2012. 8. 2 | |||
| 애플리케이션 노트 | DN023 -- 868 MHz, 915 MHz and 955 MHz Inverted F Antenna (Rev. C) | 2011. 8. 30 | |||
| 애플리케이션 노트 | AN058 -- Antenna Selection Guide (Rev. B) | 2010. 10. 6 | |||
| 애플리케이션 노트 | DN031 -- CC-Antenna-DK Documentation and Antenna Measurements Summary | 2010. 8. 26 | |||
| 추가 자료 | CC1020 Material content | 2007. 7. 16 | |||
| 추가 자료 | CC1020 RoHS Confirmation | 2006. 1. 31 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
BOOSTXL-CC1120-90 — 902MHz ~ 928MHz 범위의 애플리케이션을 위한 BoosterPack
CC1120-CC1190 BoosterPack™ 모듈은 MSP-EXP430F5529 및 MSP-EXP430G2553 LauchPad™ 개발 키트와 함께 사용하도록 설계되었으며 SmartRF Studio 애플리케이션 소프트웨어를 사용하여 독립형 모듈로 작동할 수 있습니다. 이 모듈에는 미국 902~928MHz 및 유럽 869~870MHz ISM 주파수 대역에서 작동하는 통합 PCB 트레이스 안테나가 장착되어 있습니다.
RDCR-3P-RADIO-MOD — Radiocrafts 임베디드 라디오 모듈
SWRC046 — SmartRF(TM) Studio 6.13.1
SMARTRF-STUDIO-7 — SmartRF Studio
SmartRF™ Studio는 RF 시스템 설계자가 모든 TI CC1xxx 및 CC2xxx 저전력 RF 장치 설계 공정의 초기 단계에 무선 기능을 손쉽게 평가할 수 있도록 지원하는 Windows 애플리케이션입니다. 구성 레지스터 값 및 명령의 생성과 RF 시스템의 실무 테스트 및 디버깅을 간소화합니다.
SmartRF Studio는 다음과 같은 TI 장치를 지원합니다.
리소스
CC1020EMX_REFDES — CC1020EMX 레퍼런스 디자인
The CC1020EMX reference design contains schematics and layout files for the CC1020EMX. The CC1020EMX is designed for easy connection to most MCU evaluation modules for quick and easy application development and testing. The reference design demonstrates good techniques for CC1020 decoupling and RF (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RSS) | 32 | Ultra Librarian |