이 제품의 최신 버전이 있습니다
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
CC2543
- RF section
- Single-Chip 2.4-GHz RF Transceiver and MCU
- Supports 250 kbps, 500 kbps, 1 Mbps and 2 Mbps data rates
- Excellent Link Budget, Enabling Long Range Without External
Front-Ends - Programmable Output Power up to 5 dBm
- Excellent Receiver Sensitivity (–90 dBm at 2 Mbps,
–98 dBm at 250 kbps) - Suitable for Systems Targeting Compliance With Worldwide
Radio Frequency Regulations: ETSI EN 300 328 and EN 300
440 Category 2 (Europe), FCC CFR47 Part 15 (US), and
ARIB STD-T66 (Japan) - Accurate RSSI Function
- Layout
- Few External Components
- Pin Out Suitable for Single Layer PCB Applications
- Reference Designs Available
- 32-pin 5-mm × 5-mm QFN (16 General I/O Pins)
Package
- Low Power
- Active Mode RX Best Performance: 21.2 mA
- Active Mode TX (0 dBm): 26 mA
- Power Mode 1 (5 µs Wake-Up): 235 µA
- Power mode 2 (sleep timer on): 0.9 µA
- Power mode 3 (External interrupts): 0.4µA
- Wide Supply Voltage Range (2V to 3.6V)
- Full RAM and Register Retention in All Power Modes
- Microcontroller
- High-Performance and Low-Power 8051
Microcontroller Core With Code Prefetch - 32-KB Flash Program Memory
- 1 KB SRAM
- Hardware Debug Support
- Extensive Baseband Automation, Including
Auto-Acknowledgement and Address Decoding
- High-Performance and Low-Power 8051
- Peripherals
- Two-Channel DMA with Access to all Memory
Areas and Peripherals - General-Purpose Timers (One 16-Bit, Two 8-Bit)
- Radio Timer, 40-Bit
- IR Generation Circuitry
- Several Oscillators:
- 32MHz XOSC
- 16MHz RCOSC
- 32kHz RCOSC
- 32-kHz Sleep Timer With Capture
- AES Security Coprocessor
- UART/SPI/I2C Serial Interface
- 16 General-Purpose I/O pins (3 × 20-mA Drive Strength,
Remaining pins have 4 mA Drive Strength) - Watchdog Timer
- True Random-Number Generator
- ADC and Analog Comparator
- Two-Channel DMA with Access to all Memory
The CC2543 is an optimized system-on-chip (SoC) solution with data rates up to 2Mbps built with low bill-of-material cost. The CC2543 combines the excellent performance of a leading RF transceiver with a single-cycle 8051 compliant CPU, 32-KB in-system programmable flash memory, up to 1-KB RAM, and many other powerful features. The CC2543 has efficient power modes with RAM and register retention below 1 µA, making it highly suited for low-duty-cycle systems where ultra-low power consumption is required. Short transition times between operating modes further ensure low energy consumption.
The CC2543 is compatible with the CC2541/CC2544/CC2545. It comes in a 5-mm × 5-mm QFN32 package, with SPI/UART/I2C interface. The CC2543 comes complete with reference designs from Texas Instruments.
The device targets wireless consumer and HID applications. The CC2543 is tailored for peripheral devices such as wireless mice.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 | |
|---|---|---|---|---|---|---|
| * | 데이터 시트 | CC2543 System-on-Chip for 2.4-GHz RF Applications datasheet (Rev. E) | 2013. 10. 3 | |||
| * | 정오표 | CC2543 ERRATA NOTE | 2012. 3. 28 | |||
| 애플리케이션 노트 | CE Regulations for SRDs Operating in License-Free 2.4GHz/5GHz Bands-WiFi Devices (Rev. A) | PDF | HTML | 2022. 10. 20 | |||
| 애플리케이션 노트 | Autonomous high density streaming protocol | 2013. 8. 6 | ||||
| 사용 설명서 | CC2543/44/45 Development Kit User’s Guide (Rev. B) | 2013. 6. 6 | ||||
| 사용 설명서 | CC2543, CC2544, CC2545 System-on-Chip Solution for 2.4-GHz Apps User's Guide (Rev. B) | 2013. 3. 18 | ||||
| 애플리케이션 노트 | AN081 -- Johanson Technology Balun Optimized for CC253X, CC254X, CC257X, CC853X (Rev. B) | 2012. 11. 6 | ||||
| 애플리케이션 노트 | AN118 -- Flash programming of CC253x/4x devices | 2012. 9. 5 | ||||
| 애플리케이션 노트 | AN098 - Layout Review Techniques for Low Power RF Designs (Rev. A) | 2012. 8. 2 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
CC-DEBUGGER — RF SoC(System-on-Chip)를 위한 디버거이자 프로그래머
The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips. It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging and SmartRF Flash Programmer for flash programming. The CC Debugger can also be used for controlling (...)
SMARTRF-STUDIO-7 — SmartRF Studio
SmartRF™ Studio는 RF 시스템 설계자가 모든 TI CC1xxx 및 CC2xxx 저전력 RF 장치 설계 공정의 초기 단계에 무선 기능을 손쉽게 평가할 수 있도록 지원하는 Windows 애플리케이션입니다. 구성 레지스터 값 및 명령의 생성과 RF 시스템의 실무 테스트 및 디버깅을 간소화합니다.
SmartRF Studio는 다음과 같은 TI 장치를 지원합니다.
리소스
SIMPLELINK-2-4GHZ-DESIGN-REVIEWS — SimpleLink™ CC2xxx 장치에 대한 하드웨어 설계 검토
SimpleLink 하드웨어 설계 검토 프로세스는 설계를 검토하고 귀중한 피드백을 제공할 수 있는 주제 전문가와 일대일로 연락할 수 있는 방법을 제공합니다. 간단한 3단계 검토 요청 절차와 관련 기술 문서 및 리소스 링크는 여기서 확인할 수 있습니다.
시작하기
일반 설계 질문은 2.4GHz 하드웨어 설계 검토를 요청하기 전에 E2E 포럼에 게시해야 합니다.
하드웨어 설계 검토 요청 양식과 함께 전송할 다음 필수 문서가 준비되어 있는지 확인하세요:
- 데이터 시트, 설계 가이드, 사용 설명서 및 기타 하드웨어 리소스와 같이 제품 (...)
CC2543EM-RD — CC2543EM 레퍼런스 설계
The CC2543EM reference design contains schematics and layout files for the CC2543EM module. The reference design demonstrates good techniques for CC2543 decoupling and RF layout. For optimum RF performance, the reference design should be copied accurately. This is a 4-layer reference design with an (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RHB) | 32 | Ultra Librarian |