主页 音频 音频转换器 音频编解码器
主页
音频
音频转换器
音频编解码器
全新

TAC5412-Q1

预发布

Automotive stereo audio codec with 110-dB dynamic range ADC, 120-dB DAC, HV-input and diagnostics

立即订购
数据表

TAC5412-Q1

预发布
数据表 立即订购

产品详情

Number of ADC channels 2 Number of DAC channels 2 Digital audio interface L, TDM Analog inputs 2 Analog outputs 2 Sampling rate (max) (kHz) 768 Rating Automotive Features Digital mic support, Fault Diagnostic, Headset detect, High-performance, Low latency, Low power, Mic bias, Phase-locked loop (PLL), Single supply, Stereo headphone amplifier, Thermal Foldback ADC SNR (typ) (dB) 108 DAC SNR (typ) (dB) 120 Operating temperature range (°C) -40 to 125
Number of ADC channels 2 Number of DAC channels 2 Digital audio interface L, TDM Analog inputs 2 Analog outputs 2 Sampling rate (max) (kHz) 768 Rating Automotive Features Digital mic support, Fault Diagnostic, Headset detect, High-performance, Low latency, Low power, Mic bias, Phase-locked loop (PLL), Single supply, Stereo headphone amplifier, Thermal Foldback ADC SNR (typ) (dB) 108 DAC SNR (typ) (dB) 120 Operating temperature range (°C) -40 to 125
WQFN (RTV) 32 25 mm² 5 x 5
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
  • ADC Channel
    • Performance:
      • Line differential input dynamic range: 108dB
      • Mic differential input dynamic range: 108dB
      • THD+N: –95dB
      • Channel summing mode supports high SNR
    • Input voltage:
      • Differential, 10-VRMS full-scale inputs
      • Single-ended, 5-VRMS full-scale inputs
    • Sample rate (fS) = 8kHz to 768kHz
    • Programmable microphone bias (5V to 10V):
      • With an integrated efficient boost converter, or
      • With external high voltage HVDD supply
    • Programmable microphone input fault diagnostics:
      • Open inputs or shorted inputs
      • Short to ground, MICBIAS or VBAT
      • Microphone bias over current protection
  • DAC Channel
    • DAC performance:
      • DAC to Line Out Dynamic Range: 119dB
      • DAC to HP Out Dynamic Range: 115dB
      • THD+N: –95dB
    • Head Phone/Line Out output voltage:
      • Differential, 2-VRMS full-scale
      • Single-ended, 1-VRMS full-scale
    • DAC sample Rates (fs) = 8KHz to 768KHz
  • Common Features
    • Low Latency Filter Selection
    • Programmable HPF and Biquad Filters
    • I2C Control Interface
    • Audio Serial Interface
      • Format: TDM, I2S or Left Justified
      • Word Length: 16,20,24 or 32 Bits
    • Programmable PLL for Flexible Clocking
    • Single Supply Operation: 3.3V
    • I/O Supply Operation: 1.2V, 1.8V or 3.3V
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
  • ADC Channel
    • Performance:
      • Line differential input dynamic range: 108dB
      • Mic differential input dynamic range: 108dB
      • THD+N: –95dB
      • Channel summing mode supports high SNR
    • Input voltage:
      • Differential, 10-VRMS full-scale inputs
      • Single-ended, 5-VRMS full-scale inputs
    • Sample rate (fS) = 8kHz to 768kHz
    • Programmable microphone bias (5V to 10V):
      • With an integrated efficient boost converter, or
      • With external high voltage HVDD supply
    • Programmable microphone input fault diagnostics:
      • Open inputs or shorted inputs
      • Short to ground, MICBIAS or VBAT
      • Microphone bias over current protection
  • DAC Channel
    • DAC performance:
      • DAC to Line Out Dynamic Range: 119dB
      • DAC to HP Out Dynamic Range: 115dB
      • THD+N: –95dB
    • Head Phone/Line Out output voltage:
      • Differential, 2-VRMS full-scale
      • Single-ended, 1-VRMS full-scale
    • DAC sample Rates (fs) = 8KHz to 768KHz
  • Common Features
    • Low Latency Filter Selection
    • Programmable HPF and Biquad Filters
    • I2C Control Interface
    • Audio Serial Interface
      • Format: TDM, I2S or Left Justified
      • Word Length: 16,20,24 or 32 Bits
    • Programmable PLL for Flexible Clocking
    • Single Supply Operation: 3.3V
    • I/O Supply Operation: 1.2V, 1.8V or 3.3V

The TAC5412-Q1 is a high performance Stereo Codec with 10VRMS differential Input, 108dB Stereo ADC and 2VRMS Stereo DAC Channels. The TAC5412-Q1 supports both differential and Single Ended input and output. Device supports both Microphone and Line In input on ADC Channel. DAC Output can be configured for either Line Out or Head Phone Load. TAC5412-Q1 can drive up to 62.5mW into a Headphone Load. The device also offers an integrated high-voltage, programmable microphone bias, and input diagnostic circuitry that allows direct connection to microphone-based automotive systems with full fault diagnostic capability for direct-coupled inputs. The TAC5412-Q1 integrates an efficient boost converter to generate a high voltage microphone bias using an external, low-voltage, 3.3V supply, The device can also directly use an external high-voltage supply (HVDD), which is a readily available supply in the system to generate the high-voltage, programmable microphone bias. The TAC5412-Q1 integrates programable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), programmable EQ and biquad filters, low-latency filter modes. It allows for sample rates up to 768kHz. The TAC5412-Q1 supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with I2C. These integrated high-performance features, along with a single, 3.3V supply operation, makes TAC5412-Q1 an excellent choice for space-constrained automotive systems.

The TAC5412-Q1 is a high performance Stereo Codec with 10VRMS differential Input, 108dB Stereo ADC and 2VRMS Stereo DAC Channels. The TAC5412-Q1 supports both differential and Single Ended input and output. Device supports both Microphone and Line In input on ADC Channel. DAC Output can be configured for either Line Out or Head Phone Load. TAC5412-Q1 can drive up to 62.5mW into a Headphone Load. The device also offers an integrated high-voltage, programmable microphone bias, and input diagnostic circuitry that allows direct connection to microphone-based automotive systems with full fault diagnostic capability for direct-coupled inputs. The TAC5412-Q1 integrates an efficient boost converter to generate a high voltage microphone bias using an external, low-voltage, 3.3V supply, The device can also directly use an external high-voltage supply (HVDD), which is a readily available supply in the system to generate the high-voltage, programmable microphone bias. The TAC5412-Q1 integrates programable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), programmable EQ and biquad filters, low-latency filter modes. It allows for sample rates up to 768kHz. The TAC5412-Q1 supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with I2C. These integrated high-performance features, along with a single, 3.3V supply operation, makes TAC5412-Q1 an excellent choice for space-constrained automotive systems.
open-in-new 查找其他 音频编解码器
下载 观看带字幕的视频 视频

您可能感兴趣的相似产品

open-in-new 比较替代产品
功能与比较器件相似
全新 TAA5412-Q1 预发布 具有 110dB 动态范围、HV 输入集成 HV-MICBIAS 和诊断功能的汽车立体声音频 ADC Without the integrated DAC

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 6
类型 标题 下载最新的英语版本 日期
* 数据表 TAC5412-Q1 Automotive Low Power Stereo Audio Codec with integrated programmable boost, micbias and diagnostics 数据表 PDF | HTML 2022年 1月 13日
应用手册 TAx5xxx-Q1 故障诊断功能 PDF | HTML 英语版 PDF | HTML 2024年 3月 18日
应用手册 TAx5x1x-Q1 器件的模拟输入配置、混合和多路复用 PDF | HTML 英语版 PDF | HTML 2024年 2月 9日
应用手册 TAx5x1x 系列支持的时钟错误配置、检测和模式 PDF | HTML 英语版 PDF | HTML 2024年 1月 11日
应用手册 交流耦合和直流耦合 DAC 中的输出摆幅和共模设置 PDF | HTML 英语版 PDF | HTML 2024年 1月 11日
应用手册 器件的时钟配置和 TAx5x1x 系列的灵活时钟 PDF | HTML 英语版 PDF | HTML 2024年 1月 9日

设计和开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

评估板

TAC5412Q15B5EVM-K — TAC5412Q15B5EVM-K evaluation module with integrated programmable boost, micbias and diagnostics

The TAC5412Q15B5EVM-K evaluation module (EVM) allows the user to test the capabilities of our TAC5412-Q1, a two-channel high-performance stereo codec, which is for applications in automotive e-Call, automotive head unit and telematics control unit applications. The evaluation module is paired (...)
用户指南: PDF | HTML
英语版 (Rev.A): PDF | HTML
发送申请
计算工具

TAX5X1X-Q1-EXT-RES-CALCULATOR — Input AC-Couple External Resistance Calculator for TAX5X1X-Q1 devices

TAX5X1X-Q1 AC-Couple External Resistor Calculator
支持的产品和硬件

支持的产品和硬件

产品
音频编解码器
TAC5311-Q1 — 具有动态范围 102dB ADC、106dB DAC、高压输入和诊断功能的汽车单声道音频编解码器 TAC5312-Q1 — 具有动态范围 102dB ADC、106dB DAC、高压输入和诊断功能的汽车立体声音频编解码器 TAC5411-Q1 — 具有动态范围 110dB ADC、120dB DAC、高压输入和诊断功能的汽车单声道音频编解码器 TAC5412-Q1 — Automotive stereo audio codec with 110-dB dynamic range ADC, 120-dB DAC, HV-input and diagnostics
音频 ADC
TAA5412-Q1 — 具有 110dB 动态范围、HV 输入集成 HV-MICBIAS 和诊断功能的汽车立体声音频 ADC
下载
模拟工具

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®

PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在 PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
发送申请
封装 引脚 下载
WQFN (RTV) 32 查看选项
应遵守 TI 评估类商品的标准条款与条件。

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

视频