MSPM0C1103-Q1
- AEC-Q100
qualified for automotive applications
- Temperature grade 1: –40°C to +125°C, TA
- Core
- Arm 32-bit Cortex-M0+ CPU, frequency up to 24MHz
- Operating characteristics
- Extended temperature: –40°C to 125°C
- Wide supply voltage range: 1.62V to 3.6V
- Memories
- Up to 16KB of flash
- 1KB of SRAM
- High-performance analog peripherals
- One analog-to-digital converter (ADC) with up to 10 total external channels, 1.7Msps at 10 bit or 1.5Msps at 12 bit with VDD as the voltage reference
- Configurable 1.4V or 2.5V internal ADC voltage reference (VREF)
- Integrated temperature sensor
- Integrated supply monitor
- Optimized low-power modes
- RUN: 87µA/MHz
- STOP: 609µA at 4MHz, 311µA at 32kHz
- STANDBY: 5µA with SRAM retention
- SHUTDOWN: 200nA
- Intelligent digital peripherals
- 1-channel DMA controller dedicated for ADC
- Three timers supporting up to 14 PWM channels
- One 16-bit advanced timers with deadband support up to 8 PWM channels
- One 16-bit general purpose timer with 4 capture/compares
- One 16-bit general purpose timer with 2 capture/compares
- Windowed watchdog timer
- BEEPER generating 1kHz, 2kHz, 4kHz, or 8kHz square wave to drive the external beeper
- Enhanced communication interfaces
- One UART interface supporting LIN, IrDA, DALI, smart card, Manchester and low-power operation in STANDBY mode
- One I2C interface supporting FM+ (1Mbps), SMBus, PMBus, and wakeup from STOP mode
- One SPI supporting up to 12Mbps
- Clock system
- Internal 24MHz oscillator with an accuracy from -2% to +1.2% (SYSOSC)
- Internal 32kHz low-frequency oscillator (LFOSC)
- Data integrity
- Cyclic redundancy checker (CRC-16)
- Flexible I/O features
- Up to 18 GPIOs
- Two 5V-tolerant open-drain IOs
- Development support
- 2-pin serial wire debug (SWD)
- Package options
- 20-pin VSSOP (DGS)
- 20-pin WQFN (RUK)
- 16-pin SOT (DYY)
- 8-pin SOT (DDF)
- 8-pin WSON (DSG)
- Family members (also see Device Comparison)
- MSPM0C1104: 16KB of flash, 1KB of RAM
- MSPM0C1103: 8KB of flash, 1KB of RAM
- Development kits and software (also see Tools and Software)
- LP-MSPM0C1104 LaunchPad™ development kit
- MSP Software Development Kit (SDK)
MSPM0C110x microcontrollers (MCUs) are part of the MSP highly-integrated ultra-low-power 32-bit MCU family based on the enhanced Arm Cortex-M0+ core platform operating at up to 24MHz frequency. These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature ranges from -40°C to 125°C, and operate with supply voltages from 1.62V to 3.6V.
The MSPM0C110x devices provide up to 16KB embedded flash program memory with 1KB SRAM. These MCUs incorporate a high-speed on-chip oscillator with an accuracy from -2% to +1.2%, eliminating the need for an external crystal. Additional features include a 1-channel DMA, CRC-16 accelerator, and a variety of high-performance analog peripherals such as one 12-bit 1.5Msps ADC with VDD as the voltage reference, and an on-chip temperature sensor. These devices also offer intelligent digital peripherals such as one 16-bit advanced timer, two 16-bit general purpose timer, one windowed watchdog timer, and a variety of communication peripherals including one UART, one SPI, and one I2C. These communication peripherals offer protocol support for LIN, IrDA, DALI, Manchester, smart card, SMBus, and PMBus.
The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital integration let customers find the MCU that meets their project needs. The architecture combined with extensive low-power modes is optimized to achieve extended battery life in portable measurement applications.
MSPM0C110x MCUs are supported by an extensive hardware and software ecosystem with reference designs and code examples to get the design started quickly. Development kits include a LaunchPad™ kit available for purchase and design files for a target-socket board. TI also provides a free MSP Software Development Kit (SDK), which is available as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer. MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support through the TI E2E™ support forums.
For complete module descriptions, see the MSPM0 C-Series 24MHz Microcontrollers Technical Reference Manual.
技术文档
设计与开发
如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。
LP-MSPM0C1104 — 适用于 24MHz Arm® Cortex®-M0+ MCU 的 MSPM0C1104 LaunchPad™ 开发套件
LP-MSPM0C1104 LaunchPad™ 开发套件是基于 MSPM0C1104 的易用型评估模块 (EVM)，包含在 MSPM0C1104 M0+ MCU 平台上开始开发所需的全部资源，包括用于编程和调试的板载调试探针，并且外形尺寸更小。该板包含两个按钮和一个 LED。
ALGO-3P-UISP1-TI — 适用于德州仪器 (TI) 器件的 Algocraft μISP1 编程器
μISP 既可以连接到主机 PC（内置 RS-232、USB 和 LAN 连接），也可以在独立模式下运行。
只需按下 START 按钮或通过某些 TTL 控制线，即可在独立模式下执行编程周期。
其紧凑的尺寸和多功能性便于集成到生产环境、手动和自动流程中。
TMDSEMU200-U — XDS200 USB 调试探针
XDS200 是用于调试 TI 嵌入式器件的调试探针（仿真器）。对于大多数器件，建议使用较新、成本较低的 XDS110 (www.ti.com/tool/TMDSEMU110-U)。XDS200 在单个仓体中支持更广泛的标准（IEEE1149.1、IEEE1149.7、SWD）。所有 XDS 调试探针在所有具有嵌入式跟踪缓冲器 (ETB) 的 Arm® 和 DSP 处理器中均支持内核和系统跟踪。
XDS200 通过 TI 20 引脚连接器（带有适用于 TI 14 引脚、Arm Cortex® 10 引脚和 Arm 20 引脚的多个适配器）连接到目标板，并通过 USB2.0 高速 (...)
TSK-3P-BLUEBOX — TASKING BlueBox hardware debugger
TASKING’s Debug, Trace, and Test tools offer comprehensive solutions for efficient debugging, tracing, and testing of TI's embedded systems. The scalable TASKING BlueBox debuggers allow users to easily flash, debug, and test across TI's portfolio. Development on TI hardware is made even easier with (...)
ALGO-3P-WRITENOW — Algocraft WriteNow! 编程器
WriteNow! 系列系统内编程器是编程行业的突破性产品。该系列编程器支持来自不同制造商的众多器件（微控制器、存储器、CPLD 和其他可编程器件），并具有紧凑的尺寸，方便与 ATE/固定装置集成。它们可独立运行，也可连接到主机 PC（内置 RS-232、LAN 和 USB 连接），并附带易于使用的软件实用程序。
C-GANG — 适用于独立和集成闪存且快速可靠的 Gang 编程解决方案
C-GANG 是一款低成本的 GANG 编程器，可同时对多达六个相同的目标进行编程。它与多种 TI 微控制器（包括 MSPM0、MSP430 和 C2000 器件）兼容。
MSPM0-SDK — MSPM0 Software Development Kit (SDK)
MSPM0 SDK 通过单个软件包提供软件、工具和文档的精选集合，可以加快 MSPM0 MCU 平台应用程序的开发。
CCSTUDIO — Code Composer Studio™ integrated development environment (IDE)
CCStudio™ integrated development environment (IDE) is part of TI's extensive CCStudio™ development ecosystem and is an integrated development environment for TI's microcontrollers, processors, wireless connectivity devices, and radar sensors. CCStudio IDE is available as desktop or (...)
CCSTUDIO-OPENOCD — OpenOCD Binary Releases
MSP-ZERO-CODE-STUDIO — Graphical development environment for designing applications for MSP microcontrollers
MSP Zero Code Studio 是一个可视化设计环境，可简化固件开发，可在数分钟内完成微控制器应用的配置、开发和运行，无需编码且无需 IDE。可独立下载或通过云端使用。
SYSCONFIG — Standalone desktop version of SysConfig
CCStudio™ SysConfig is part of TI's extensive CCStudio™ development ecosystem and is a configuration tool that simplifies hardware and software configuration challenges to accelerate software development.
SysConfig provides an intuitive graphical user interface for configuring pins, peripherals, (...)
CCSTUDIO-STARTHUB — Example application browser
TI-DEVELOPER-ZONE — Start embedded development on your desktop or in the cloud
GHS-3P-UVELOSITY — Green Hills Software u-velOSity Safety RTOS
The µ-velOSity™ Safety RTOS is the smallest of Green Hills Software's real-time operating systems and was designed especially for microcontrollers. It supports a wide range of TI processor families using the Arm® Cortex-M or Cortex-R cores as a main CPU or as a co-processors (...)
LP-MSPM0C1104-OOBE — Out-of-box experience GUI for LP-MSPM0C1104
UNIFLASH — UniFlash for most TI microcontrollers (MCUs) and mmWave sensors
UniFlash 是 TI 庞大的 CCStudio™ 开发生态系统的成员并且是一款软件工具，用于对 TI 微控制器和无线连接器件上的片上闪存以及 TI 处理器的板载闪存进行编程。UniFlash 提供图形界面和命令行界面，可在桌面上或云中运行。
可以在 CCStudio™ 开发人员专区从云中运行 UniFlash，也可以将其下载并在 Windows®、Linux® 和 macOS® 计算机上使用。
请注意，毫米波、AMx、K2G 和 J7 器件不支持 macOS。AMx、K2G 和 J7 器件仅在命令行上受支持。
TIDA-010268 — 具有低侧 MOSFET 控制功能的 5 至 7 节串联电池包监测器参考设计
该参考设计是一款具有高电芯电压精度的 5 至 7 节串联锂离子 (Li-ion)、磷酸铁锂 (LiFePO4) 电池包设计。该设计能够非常精确地监测各个电芯的电压、电池包电流和金属氧化物半导体场效应晶体管 (MOSFET) 温度，并防止锂离子和磷酸铁锂电池包出现电芯过压、电芯欠压、过热、充放电过流以及放电短路现象。该产品采用低侧 N 沟道 MOSFET 架构，具有强大的驱动开关能力。得益于上述特性，该参考设计非常适用于电动工具和真空吸尘器电池包应用。
| 封装 | 引脚 | CAD 符号、封装和 3D 模型 |
|---|---|---|
| VSSOP (DGS) | 20 | Ultra Librarian |
| SOT-23-THN (DYY) | 16 | Ultra Librarian |
| WSON (DSG) | 8 | Ultra Librarian |
| SOT-23-THN (DDF) | 8 | Ultra Librarian |
| WQFN (RUK) | 20 | Ultra Librarian |
订购和质量
推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。