SWRA603A March   2018  – May 2019 CC1100 , CC1101 , CC110L , CC1120 , CC1121 , CC1125 , CC113L , CC1150 , CC115L , CC1175 , CC1190 , CC1200 , CC1201 , CC1310 , CC1312PSIP , CC1312R , CC1314R10 , CC1350 , CC1352R , CC2530 , CC2531 , CC2538 , CC2540 , CC2541 , CC2590 , CC2591 , CC2592 , CC2640 , CC2642R , CC2642R-Q1 , CC2650 , CC2650MODA , CC2652R , CC2652R7 , CC2652RB , CC2652RSIP

 

  1.   Debugging Communication Range
  2.   Trademarks
  3. 1Calculate the Theoretical Range
  4. 2Determine Root Cause
  5. 3Measure the Conducted Sensitivity
  6. 4Measure the Conducted Output Power
  7. 5Antenna Measurements
  8. 6Still Issues?
  9. 7References
  10. 8Revision History

1 Debugging Communication Range

In a RF system having the best possible range is important in many cases. There are many factors that can cause poor range. This application report provides a step-by-step guide on which parts of the design could cause shorter range than desired.

Table 1-1 Definition of Terms
TermDefinition
ConductedThe DUT is connected via cable directly to the instrument.
RadiatedOver the air
CWCarrier Wave (tone)