SPRADS1 June   2025 F29H850TU

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Introduction
    1. 1.1 Hardware Security Module
    2. 1.2 Flash Programming Fundamentals
    3. 1.3 High-Level Flow
    4. 1.4 Flow Chart
  5. 2Flash-Based UART SBL with FOTA
    1. 2.1 Implementation
    2. 2.2 Triggering a Bank Swap
  6. 3FOTA_Example_Application
    1. 3.1 led_blinky_cpu1.c
    2. 3.2 Combining the Flash-Based SBL with the FOTA_Example_Application
    3. 3.3 Adding a CPU3 Application
  7. 4Host Application: UART Flash Programmer
    1. 4.1 Overview
  8. 5Example Usage
    1. 5.1 Loading the SBL onto the Device
      1. 5.1.1 Loading by CCS (JTAG)
      2. 5.1.2 Loading via UART Boot and the UART Flash Kernel
    2. 5.2 Example UART Loading Process
  9. 6FAQ
    1. 6.1 General
    2. 6.2 Application Load
  10. 7Summary
  11. 8References

5.1 Loading the SBL onto the Device

This section of the document details how the flash-based SBL (and example application) can be loaded onto the device during development or over UART.