SLAU330B May   2011  – April 2017

 

  1.   Read This First
    1.     If You Need Assistance
    2.     Related Documentation from Texas Instruments
    3.     Trademarks
  2.   MSP-EXP430F5529 Experimenter's Board
    1. 1 Getting Started
      1. 1.1 MSP-EXP430F5529 Experimenter's Board Introduction
      2. 1.2 Kit Contents
    2. 2 User Experience Software
      1. 2.1 Introduction
      2. 2.2 Main Menu
      3. 2.3 Clock
      4. 2.4 Games
      5. 2.5 Power Tests
      6. 2.6 Demo Apps
      7. 2.7 SD Card Access
      8. 2.8 Settings Menu
    3. 3 Software Installation and Debugging
      1. 3.1 Software
      2. 3.2 Download the Required Software
      3. 3.3 Working With the Example Software
        1. 3.3.1 Basic Code Structure
    4. 4 MSP-EXP430F5529 Hardware
      1. 4.1 Hardware Overview
      2. 4.2 Jumper Settings and Power
      3. 4.3 eZ-FET Emulator
      4. 4.4 MSP-EXP430F5529 Hardware Components
        1. 4.4.1 Dot-Matrix LCD
        2. 4.4.2 Push Buttons, Potentiometer, and LEDs
        3. 4.4.3 Wireless Evaluation Module Interface
        4. 4.4.4 eZ430-RF2500T Interface
        5. 4.4.5 3-Axis Accelerometer
        6. 4.4.6 Pin Access Headers
    5. 5 Frequently Asked Questions, References, and Schematics
      1. 5.1 Frequently Asked Questions
      2. 5.2 References
      3. 5.3 Schematics and BOM
  3.   Revision History

4.4.2 Push Buttons, Potentiometer, and LEDs

Table 2 describes the pin connections for the potentiometer, push-button switches, and the on-board LEDs.

Table 2. Push Buttons, Potentiometer, and LED Connections

Peripheral Pin Connection
Potentiometer Wheel P8.0
Switch 1 (S1) P1.7
Switch 2 (S2) P2.2
RESET Switch (S3) RST/NMI
LED1 P1.0
LED2 P8.1
LED3 P8.3
Capacitive Touch Pad 1 (Cross) P1.1
Capacitive Touch Pad 2 (Square) P1.2
Capacitive Touch Pad 3 (Octagon) P1.3
Capacitive Touch Pad 4 (Triangle) P1.4
Capacitive Touch Pad 5 (Circle) P1.5