ZHCSLQ5D October   2007  – August 2020 LM5067

PRODUCTION DATA  

  1. 特性
  2. 应用
  3. 说明
  4. Revision History
  5. Device Comparison
  6. Pin Configuration and Functions
    1.     Pin Functions
  7. Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Switching Characteristics
    7. 7.7 Typical Characteristics
  8. Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Power Up Sequence
      2. 8.3.2 Gate Control
      3. 8.3.3 Current Limit
      4. 8.3.4 Circuit Breaker
      5. 8.3.5 Power Limit
      6. 8.3.6 Fault Timer and Restart
      7. 8.3.7 Undervoltage Lock-Out (UVLO)
      8. 8.3.8 Overvoltage Lock-Out (OVLO)
      9. 8.3.9 Power Good Pin
    4. 8.4 Device Functional Modes
      1. 8.4.1 Shutdown / Enable Control
  9. Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1  RIN, CIN
        2. 9.2.2.2  Current Limit, RS
        3. 9.2.2.3  Power Limit Threshold
        4. 9.2.2.4  Turn-On Time
          1. 9.2.2.4.1 Turn-on With Current Limit Only
          2. 9.2.2.4.2 Turn-on With Power Limit and Current Limit
        5. 9.2.2.5  MOSFET Selection
        6. 9.2.2.6  Timer Capacitor, CT
          1. 9.2.2.6.1 Insertion Delay
          2. 9.2.2.6.2 Fault Timeout Period
          3. 9.2.2.6.3 Restart Timing
        7. 9.2.2.7  UVLO, OVLO
          1. 9.2.2.7.1 Option A:
          2. 9.2.2.7.2 Option B:
          3. 9.2.2.7.3 Option C:
          4. 9.2.2.7.4 Option D:
        8. 9.2.2.8  Thermal Considerations
        9. 9.2.2.9  System Considerations
          1. 9.2.2.9.1 System Considerations During Surge Events
        10. 9.2.2.10 Power Good Pin
      3. 9.2.3 Application Curves
  10. 10Power Supply Recommendations
    1. 10.1 Operating Voltage
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Trademarks
    2. 12.2 静电放电警告
    3. 12.3 术语表
  13. 13Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

Electrical Characteristics

Limits in standard type are for TJ = 25°C only; limits in boldface type apply over the junction temperature (TJ) range of -40°C to +125°C. Minimum and Maximum limits are specified through test, design, or statistical correlation. Typical values represent the most likely parametric norm at TJ = 25°C, and are provided for reference purposes only. Unless otherwise stated the following conditions apply: ICC = 2 mA, OUT Pin = 48V above VEE, all voltages are with respect to VEE. See (1).
PARAMETERTETS CONDITIONSMINTYPMAXUNIT
Input
VZOperating voltage, VCC – VEEICC = 2 mA, UVLO = 5V12.351313.65V
ICC-ENInternal operating current, enabledVCC-VEE = 11V,
UVLO = 5V
0.81mA
ICC-DISInternal operating current, disabledVCC-VEE = 11V,
UVLO = 2V
480660µA
PORITThreshold voltage to start insertion timerVCC-VEE increasing7.78.2V
PORENThreshold voltage to enable all functionsVCC-VEE increasing8.48.7V
POREN-HYSPOREN hysteresisVCC-VEE decreasing125mV
OUT Pin
IOUT-ENOUT bias current, enabledOUT = VEE, Normal operation0.1µA
IOUT-DISOUT bias current, disabledDisabled, OUT = VEE + 48V50
SENSE Pin
ISNS-ENSENSE bias current, enabledOUT = VEE, Normal operation-6µA
ISNS-DISSENSE bias current, disabledDisabled, OUT = VEE + 48V-50
UVLO, OVLO Pins
UVLOTHUVLO threshold2.452.52.55V
UVLOHYSUVLO hysteresis currentUVLO = VEE + 2V102234µA
UVLOBIASUVLO bias currentUVLO = VEE + 5V1µA
OVLOTHOVLO threshold2.432.52.57V
OVLOHYSOVLO hysteresis currentOVLO = VEE+2.8V-34-22-10µA
OVLOBIASOVLO bias currentOVLO = VEE + 2.4V1µA
Gate Control (GATE Pin)
IGATESource currentNormal Operation-72-52-32µA
Sink currentUVLO < 2.5V1.92.22.68mA
SENSE - VEE =150 mV or
VCC - VEE < PORIT, VGATE = 5V
45110200
VGATEGate output voltage in normal operationGATE-VEE voltageVZV
Current Limit
VCLThreshold voltageSENSE - VEE voltage445056mV
Circuit Breaker
VCBThreshold voltageSENSE - VEE voltage70100130mV
Power Limit (PWR Pin)
PWRLIMPower limit sense voltage (SENSE - VEE)OUT - SENSE = 24V, RPWR = 75 kΩ16.52227.5mV
IPWRPWR pin currentVPWR = 2.5V-23µA
Timer (TIMER Pin)
VTMRHUpper threshold3.7644.16V
VTMRLLower thresholdRestart cycles (LM5067-2)1.181.251.32V
End of 8th cycle (LM5067-2)0.3V
Re-enable threshold (LM5067-1)0.3V
ITIMERInsertion time currentTIMER pin = 2V-9.5-6-2.5µA
Sink current, end of insertion timeTIMER pin = 2V1.21.551.9mA
Fault detection currentTIMER pin = 2V-140-95-44µA
Sink current, end of fault time0.92.54.25µA
DCFAULTFault Restart Duty CycleLM5067-20.5%
Power Good (PGD Pin)
PGDTHThreshold measured at OUT - SENSEDecreasing1.1621.231.285V
Increasing, relative to decreasing threshold1.1431.251.325
PGDVOLOutput low voltageISINK = 2 mA60150mV
PGDIOHOff leakage currentVPGD = 80V5µA
Current out of a pin is indicated as a negative value.