ZHCS890B May   2012  – March 2016 INA3221

PRODUCTION DATA.  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 修订历史记录
  5. 5 Device Comparison Table
  6. 6 Pin Configuration and Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Typical Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Basic ADC Functions
      2. 8.3.2 Alert Monitoring
        1. 8.3.2.1 Critical Alert
          1. 8.3.2.1.1 Summation Control Function
        2. 8.3.2.2 Warning Alert
        3. 8.3.2.3 Power-Valid Alert
        4. 8.3.2.4 Timing-Control Alert
        5. 8.3.2.5 Default Settings
      3. 8.3.3 Software Reset
    4. 8.4 Device Functional Modes
      1. 8.4.1 Averaging Function
      2. 8.4.2 Multiple Channel Monitoring
        1. 8.4.2.1 Channel Configuration
        2. 8.4.2.2 Averaging and Conversion-Time Considerations
      3. 8.4.3 Filtering and Input Considerations
    5. 8.5 Programming
      1. 8.5.1 Bus Overview
        1. 8.5.1.1 Serial Bus Address
        2. 8.5.1.2 Serial Interface
      2. 8.5.2 Writing To and Reading From the INA3221
        1. 8.5.2.1 High-Speed I2C Mode
      3. 8.5.3 SMBus Alert Response
    6. 8.6 Register Maps
      1. 8.6.1 Summary of Register Set
      2. 8.6.2 Register Descriptions
        1. 8.6.2.1  Configuration Register (address = 00h) [reset = 7127h]
        2. 8.6.2.2  Channel-1 Shunt-Voltage Register (address = 01h), [reset = 00h]
        3. 8.6.2.3  Channel-1 Bus-Voltage Register (address = 02h) [reset = 00h]
        4. 8.6.2.4  Channel-2 Shunt-Voltage Register (address = 03h) [reset = 00h]
        5. 8.6.2.5  Channel-2 Bus-Voltage Register (address = 04h) [reset = 00h]
        6. 8.6.2.6  Channel-3 Shunt-Voltage Register (address = 05h) [reset = 00h]
        7. 8.6.2.7  Channel-3 Bus-Voltage Register (address = 06h) [reset = 00h]
        8. 8.6.2.8  Channel-1 Critical-Alert Limit Register (address = 07h) [reset = 7FF8h]
        9. 8.6.2.9  Warning-Alert Channel-1 Limit Register (address = 08h) [reset = 7FF8h]
        10. 8.6.2.10 Channel-2 Critical-Alert Limit Register (address = 09h) [reset = 7FF8h]
        11. 8.6.2.11 Channel-2 Warning-Alert Limit Register (address = 0Ah) [reset = 7FF8h]
        12. 8.6.2.12 Channel-3 Critical-Alert Limit Register (address = 0Bh) [reset = 7FF8h]
        13. 8.6.2.13 Channel-3 Warning-Alert Limit Register (address = 0Ch) [reset = 7FF8h]
        14. 8.6.2.14 Shunt-Voltage Sum Register (address = 0Dh) [reset = 00h]
        15. 8.6.2.15 Shunt-Voltage Sum-Limit Register (address = 0Eh) [reset = 7FFEh]
        16. 8.6.2.16 Mask/Enable Register (address = 0Fh) [reset = 0002h]
        17. 8.6.2.17 Power-Valid Upper-Limit Register (address = 10h) [reset = 2710h]
        18. 8.6.2.18 Power-Valid Lower-Limit Register (address = 11h) [reset = 2328h]
        19. 8.6.2.19 Manufacturer ID Register (address = FEh) [reset = 5449h]
        20. 8.6.2.20 Die ID Register (address = FFh) [reset = 3220]
  9. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curves
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12器件和文档支持
    1. 12.1 器件支持
      1. 12.1.1 开发支持
    2. 12.2 文档支持
      1. 12.2.1 相关文档
    3. 12.3 社区资源
    4. 12.4 商标
    5. 12.5 静电放电警告
    6. 12.6 Glossary
  13. 13机械、封装和可订购信息

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

6 Pin Configuration and Functions

RGV Package
16-Pin VQFN
Top View
INA3221 po_QFN_bos576.gif

Pin Functions

PIN I/O DESCRIPTION
NAME NO.
A0 5 Digital input Address pin. Connect to GND, SCL, SDA, or VS. Table 1 shows pin settings and corresponding addresses.
Critical 9 Digital output Conversion-triggered critical alert; open-drain output.
GND 3 Analog Ground
IN–1 11 Analog input Connect to load side of the channel 1 shunt resistor. Bus voltage is the measurement from this pin to ground.
IN+1 12 Analog input Connect to supply side of the channel 1 shunt resistor.
IN–2 14 Analog input Connect to load side of the channel 2 shunt resistor. Bus voltage is the measurement from this pin to ground.
IN+2 15 Analog input Connect to supply side of the channel 2 shunt resistor.
IN–3 1 Analog input Connect to load side of the channel 3 shunt resistor. Bus voltage is the measurement from this pin to ground.
IN+3 2 Analog input Connect to supply side of the channel 3 shunt resistor.
PV 10 Digital output Power valid alert; open-drain output.
SCL 6 Digital input Serial bus clock line; open-drain input.
SDA 7 Digital I/O Serial bus data line; open-drain input/output.
TC 13 Digital output Timing control alert; open-drain output.
VPU 16 Analog input Pull-up supply voltage used to bias power valid output circuitry.
VS 4 Analog Power supply, 2.7 V to 5.5 V.
Warning 8 Digital output Averaged measurement warning alert; open-drain output.