ZHCSM61 数据表 | 德州仪器 TI.com.cn

ZHCSM61C November 2014 – September 2020 CC3200MOD

PRODUCTION DATA

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

MOB|63

散热焊盘机械数据 (封装 | 引脚)

7.2.1 Module Pin Attributes

MODULE PIN		TYPE	DEVICE PIN NO.	MODULE PIN DESCRIPTION
NO.	NAME	TYPE	DEVICE PIN NO.	MODULE PIN DESCRIPTION
1	GND	–	–	Ground
2	GND	–	–	Ground
3	GPIO10	I/O	1	GPIO⁽¹⁾
4	GPIO11	I/O	2	GPIO⁽¹⁾
5	GPIO14	I/O	5	GPIO⁽¹⁾
6	GPIO15	I/O	6	GPIO⁽¹⁾
7	GPIO16	I/O	7	GPIO⁽¹⁾
8	GPIO17	I/O	8	GPIO⁽¹⁾
9	GPIO12	I/O	3	GPIO⁽¹⁾
10	GPIO13	I/O	4	GPIO⁽¹⁾
11	GPIO22	I/O	15	GPIO⁽¹⁾
12	JTAG_TDI	I/O	16	GPIO⁽¹⁾
13	NC	–	13	Reserved for TI
14	NC	–	14	Reserved for TI
15	NC	–	11	Reserved for TI
16	GND	–	–	Ground
17	NC	–	12	Reserved for TI
18	JTAG_TDO	I/O	17	GPIO⁽¹⁾
19	GPIO28	I/O	18	GPIO⁽¹⁾
20	NC	–	23	Unused. Do not connect.
21	JTAG_TCK	I/O	19	JTAG TCK input. Needs 100-kΩ pulldown resistor to ground. Not adding the 100K resistor can cause higher current in LPDS mode.⁽¹⁾
22	JTAG_TMS	I/O	20	JTAG TMS input. Leave unconnected if not used on product.⁽¹⁾
23	SOP2	–	21	Add 2.7-kΩ pulldown resistor to ground needed for functional mode. Connect to test point to be pulled high for entering the UART load mode for flashing.
24	SOP1	–	34	Reserved. Do not connect.
25	ANTSEL1	I/O	29	Antenna selection control⁽¹⁾
26	ANTSEL2	I/O	30	Antenna selection control⁽¹⁾
27, 28	GND	-	–	Ground
29	NC	-	27, 28	Reserved for TI
30	GND	-	–	Ground
31	RF_BG	I/O	31	2.4-GHz RF input/output
32	GND	–	–	Ground
33	NC	–	38	Reserved for TI
34	SOP0	–	35	Optional 10-kΩ pullup if user chooses to use SWD debug mode instead of 4-wire JTAG
35	nRESET	I	32	Power on reset. Does not require external RC circuit
36	VBAT_DCDC_ANA	–	37	Power supply for the device, can be connected to battery (2.3 V to 3.6 V)
37	VBAT_DCDC_PA	–	39	Power supply for the device, can be connected to battery (2.3 V to 3.6 V)
38	GND	–	–	Ground
39	NC	–	47	Leave unconnected
40	VBAT_DCDC_DIG_IO	–	10, 44, 54	Power supply for the device, can be connected to battery (2.3 V to 3.6 V)
41	NC	–	25, 36, 48	Reserved for TI
42	GPIO30	I/O	53	GPIO⁽¹⁾
43	GND	–	–	Ground
44	GPIO0	I/O	50	GPIO⁽¹⁾
45	NC	–	51	Reserved for TI
46	GPIO1	I/O	55	GPIO⁽¹⁾
47	GPIO2	I/O	57	GPIO⁽¹⁾
48	GPIO3	I/O	58	GPIO⁽¹⁾
49	GPIO4	I/O	59	GPIO⁽¹⁾
50	GPIO5	I/O	60	GPIO⁽¹⁾
51	GPIO6	I/O	61	GPIO⁽¹⁾
52	GPIO7	I/O	62	GPIO⁽¹⁾
53	GPIO8	I/O	63	GPIO⁽¹⁾
54	GPIO9	I/O	64	GPIO⁽¹⁾
55, 56, 57, 58, 59, 60, 61, 62, 63	GND	–	–	Thermal Ground

(1) For pin multiplexing details, refer to the CC3200 SimpleLink™ Wi-Fi^® Wireless and Internet-of-Things Solution, a Single-Chip Wireless MCU data sheet.