ZHCSU23A October 2023 – December 2023 BQ25638
PRODUCTION DATA
请参考 PDF 数据表获取器件具体的封装图。
During OTG operation, BQ25638 uses two comparators to sense output overvoltage at VBUS and PMID. If either VBUS or PMID voltage rises above their OVP threshholds, the converter stops switching and attempts to discharge the voltage.
If the OVP condition persists on VBUS or PMID, OTG_FAULT_FLAG is set to 1, OTG_FAULT_STAT transitions to 1 and the converter powers down into a fault condition and the device exits from OTG mode by setting EN_OTG = 0.