ZHCSVF5E July 1985 – March 2024 SN75ALS192
PRODUCTION DATA
- 1
- 1 特性
- 2 应用
- 3 说明
- 4 Pin Configuration and Functions
-
5 Specifications
- 5.1 Absolute Maximum Ratings
- 5.2 Dissipation Rating Table
- 5.3 Recommended Operating Conditions
- 5.4 Thermal Information
- 5.5 Electrical Characteristics
- 5.6 Switching Characteristics
- 5.7 Typical Characteristics Operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied.
- 6 Parameter Measurement Information
- 7 Device Functional Modes
- 8 Device and Documentation Support
- 9 Revision History
- 10Mechanical, Packaging, and Orderable Information
封装选项
请参考 PDF 数据表获取器件具体的封装图。
机械数据 (封装 | 引脚)
- NS|16
- N|16
- D|16
散热焊盘机械数据 (封装 | 引脚)
订购信息
6 Parameter Measurement Information
Figure 6-1 Differential and Common-Mode Output Voltages
A. When measuring propagation delay times and skew, switches S1 and S2 are open.
B. Each enable is tested separately.
C. Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
D. CL includes probe and jig capacitance.
E. All input pulses are supplied by generators having the following characteristics: PRR ≤ 1 MHz, ZO ≈ 50 Ω, tr ≤ 15 ns, and tf ≤ 6 ns.
Figure 6-2 Test Circuit and Voltage Waveforms