SMARTRFTRXEBK
SmartRF 트랜시버 평가 보드
SMARTRFTRXEBK
개요
The SmartRF Transceiver Evaluation Board (TrxEB) is intended to be used together with Texas Instruments’ low-power RF transceivers for evaluation, performance testing and software development.
The following transceiver evaluation modules are supported:
- CC1101EM*
- CC11xLEM*
- CC112xEM*
- CC1175EM*
- CC1200EM*
- CC2500EM
- CC2520EM
(*) all frequency variants and combinations with CC1190 also supported
The evaluation modules can be bought separately on TI Store as EMKs (evaluation module kits).
What can you do with the SmartRF TrxEB?
- Develop your radio protocol on the MSP430F5438A MCU. Refer to the code examples on the relevant transceiver’s web page.
- Evaluate the performance of the transceiver using SmartRF Studio.
- Compare results obtained with the TrxEB+EM with results from your own hardware.
- Test your RF design using known good software by connecting the radio on your board to the TrxEB. SmartRF Studio can then be used to exercise the radio.
- Test your software using known good RF hardware by connecting the MCU on your board to a transceiver EM via breakout pins on the TrxEB.
Please refer to the SmartRFTrxEB User’s Guide for the most up-to-date information about the board. The guide will describe how to install drivers, more details about the peripherals on the board and how to interface with the transceiver evaluation module.
특징
- MSP430F5438A microcontroller
- 64x128 pixels serial LCD
- 4 general purpose LEDs
- 5 push-buttons
- 256 kB serial flash
- Three-axis digital accelerometer
- Ambient Light Sensor
- Jumpers for current measurements
- Break-out pins
- Full-speed USB 2.0 interface
- SmartRF Studio Support
1 x SmartRFTrxEB 1 x Micro USB cable Documentation
Sub-1 GHz 트랜시버
주문 및 개발 시작
평가 보드
SMARTRFTRXEBK — SmartRF Transceiver Evaluation Board
SMARTRFTRXEBK — SmartRF Transceiver Evaluation Board
계산 툴
SMARTRF-STUDIO-7 — SmartRF Studio
지원되는 제품 및 하드웨어
제품
MSP430 microcontrollers
Sub-1 GHz 트랜시버
Sub-1GHz 무선 MCU
기타 무선 제품
저전력 2.4GHz 제품
차량용 무선 커넥티비티 제품
하드웨어 개발
개발 키트
도터 카드
인터페이스 어댑터
평가 보드
SMARTRF-STUDIO-7 — SmartRF Studio
제품
MSP430 microcontrollers
Sub-1 GHz 트랜시버
Sub-1GHz 무선 MCU
기타 무선 제품
저전력 2.4GHz 제품
차량용 무선 커넥티비티 제품
하드웨어 개발
개발 키트
도터 카드
인터페이스 어댑터
평가 보드
문서
SmartRF Studio 7 in Cloud TI Resource Explorer
Compressed source file archive
출시 정보
SmartRF™ Studio is a Windows application that can be used to evaluate and configure Low Power RF devices from Texas Instruments. The application helps designers of RF systems to easily evaluate the radio at an early stage in the design process. It is especially useful for generation of configuration register values and commands, and for practical testing and debugging of the RF system. SmartRF Studio can be used either as a standalone application or together with applicable evaluation boards or debug probes for the RF device.
새 소식
- Updated RF PHY settings for the CC13x4/CC26x4 devices
- Updated target board definitions for LP_EM_CC2674P10
- Various improvements and bug-fixes
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
3개 모두 보기
| 유형 | 직함 | 최신 영어 버전 다운로드 | 날짜 | ||
|---|---|---|---|---|---|
| 인증서 | SMARTRFTRXEBK EU Declaration of Conformity (DoC) | 2019. 1. 2 | |||
| 백서 | Frequency hopping for long-range IoT networks | 2016. 7. 18 | |||
| 사용 설명서 | SmartRF Transceiver Evaluation Board User’s Guide (Rev. A) | 2012. 2. 10 |