首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器
首頁
電源管理
DC/DC 切換穩壓器
DC/DC 轉換器

TPS62090-Q1

現行

汽車: 3A、2.5 至 6V 輸入、高達 97% 效率、3x3 QFN 降壓轉換器

立即訂購
產品規格表

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同，但針腳輸出與所比較的裝置不同。
TPS62813-Q1 現行 具有固定 Fsw 和 SYNC 並採用 2 mm x 3 mm 可潤濕側翼封裝的車用 2.75V 至 6V、3A 降壓轉換器 New generation with smaller solution size and higher efficiency

TPS62090-Q1

現行
產品規格表 立即訂購

產品詳細資料

Rating Automotive Topology Buck Iout (max) (A) 3 Vin (max) (V) 6 Vin (min) (V) 2.5 Vout (max) (V) 6 Vout (min) (V) 0.8 Features Enable, Light Load Efficiency, Light load efficiency, Output discharge, Power good, Synchronous Rectification, Tracking Control mode Constant on-time (COT), DCS-Control Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00002 Duty cycle (max) (%) 100
Rating Automotive Topology Buck Iout (max) (A) 3 Vin (max) (V) 6 Vin (min) (V) 2.5 Vout (max) (V) 6 Vout (min) (V) 0.8 Features Enable, Light Load Efficiency, Light load efficiency, Output discharge, Power good, Synchronous Rectification, Tracking Control mode Constant on-time (COT), DCS-Control Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00002 Duty cycle (max) (%) 100
VQFN (RGT) 16 9 mm² (3 mm × 3 mm)
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to 125°C junction operating temperature range
    • Device HBM ESD classification level H2
    • Device CDM ESD classification level C6
  • 2.5V to 6V input voltage range
  • DCS-Control
  • 95% converter efficiency
  • Power save mode
  • 20µA operating quiescent current
  • 100% duty cycle for lowest dropout
  • 2.8MHz and 1.4MHz typical switching frequency
  • 0.8V to VIN adjustable output voltage
  • Output discharge function
  • Adjustable soft start
  • Hiccup short-circuit protection
  • Output voltage tracking
  • Wide output capacitance selection
  • Available in 3mm × 3mm, 16-pin QFN package
  • New product available: TPS62813-Q1, 6V step-down converter in 2mm × 3mm QFN package with wettable flanks
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 1: –40°C to 125°C junction operating temperature range
    • Device HBM ESD classification level H2
    • Device CDM ESD classification level C6
  • 2.5V to 6V input voltage range
  • DCS-Control
  • 95% converter efficiency
  • Power save mode
  • 20µA operating quiescent current
  • 100% duty cycle for lowest dropout
  • 2.8MHz and 1.4MHz typical switching frequency
  • 0.8V to VIN adjustable output voltage
  • Output discharge function
  • Adjustable soft start
  • Hiccup short-circuit protection
  • Output voltage tracking
  • Wide output capacitance selection
  • Available in 3mm × 3mm, 16-pin QFN package
  • New product available: TPS62813-Q1, 6V step-down converter in 2mm × 3mm QFN package with wettable flanks

The TPS62090-Q1 devices are a family of high-frequency, synchronous, step-down converters optimized for small design size, high efficiency, and are designed for battery-powered applications. To maximize efficiency, the converters operate in pulse width modulation (PWM) mode with a nominal switching frequency of 2.8MHz to 1.4MHz and automatically enter power save mode operation at light load currents. When used in distributed power supplies and point-of-load regulation, the devices allow voltage tracking to other voltage rails and tolerate output capacitors ranging from 10µF up to 150µF and beyond. Using the DCS-Control topology, the devices achieve excellent load transient performance and accurate output voltage regulation.

The output voltage start-up ramp is controlled by the SS pin, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the enable and power good pins. In power save mode, the devices operate at typically 20µA quiescent current. Power save mode is entered automatically and seamlessly maintaining high efficiency over the entire load current range.

The TPS62090-Q1 devices are a family of high-frequency, synchronous, step-down converters optimized for small design size, high efficiency, and are designed for battery-powered applications. To maximize efficiency, the converters operate in pulse width modulation (PWM) mode with a nominal switching frequency of 2.8MHz to 1.4MHz and automatically enter power save mode operation at light load currents. When used in distributed power supplies and point-of-load regulation, the devices allow voltage tracking to other voltage rails and tolerate output capacitors ranging from 10µF up to 150µF and beyond. Using the DCS-Control topology, the devices achieve excellent load transient performance and accurate output voltage regulation.

The output voltage start-up ramp is controlled by the SS pin, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the enable and power good pins. In power save mode, the devices operate at typically 20µA quiescent current. Power save mode is entered automatically and seamlessly maintaining high efficiency over the entire load current range.
filter 尋找其它 DC/DC 轉換器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 15
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPS62090-Q1 3A, High-Efficiency, Automotive, Synchronous Step-Down Converter With DCS-Control datasheet (Rev. D) PDF | HTML 2025/6/6
應用說明 QFN and SON PCB Attachment (Rev. C) PDF | HTML 2023/12/6
功能安全資訊 TPS62090-Q1 Pin FMA PDF | HTML 2022/8/8
類比設計期刊 Methods of output-voltage adjustment for DC/DC converters 2019/6/14
應用說明 Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 2018/12/11
類比設計期刊 Understanding 100% mode in low-power DC/DC converters 2018/6/22
類比設計期刊 Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold 2017/10/24
類比設計期刊 Testing tips for applying external power to supply outputs without an input voltage 2016/10/24
類比設計期刊 Understanding frequency variation in the DCS-Control(TM) topology 2015/10/30
應用說明 Basic Calculation of a Buck Converter's Power Stage (Rev. B) PDF | HTML 2015/8/17
類比設計期刊 Five steps to a great PCB layout for a step-down converter 2015/1/29
應用說明 How to Measure the Control Loop of DCS-Control Devices (Rev. A) 2012/8/9
應用說明 Optimizing the TPS62090 Output Filter 2012/5/11
應用說明 Understanding the Absolute Maximum Ratings of the SW Node (Rev. A) 2012/1/13
應用說明 Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs 2011/9/19

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬型號

TPS62090 PSpice Unencrypted Transient Model (Rev. A)

SLVM563A.ZIP (24 KB) - PSpice 模型
支援產品和硬體
計算工具

SLVC780 — Design Tool for Output Voltage Adjustment Using a DAC

Calculator tool to adjust the power supply's output voltage with an analog input voltage
支援產品和硬體
參考設計

PMP22030 — 適用於車載資訊娛樂系統顯示器的高效、低熱、符合 CISPR 25 5 類標準電源參考設計

此參考設計著重於汽車資訊娛樂顯示單元的電源樹，涵蓋各種電源供應軌，包括兩個提供 5.0-V 與 3.3-V 的無電池轉換器，以及 1.8-V 與 1.1-V 的中間系統軌。測試結果證明效率高、散熱低，符合 CISPR 25 第 5 級傳導式排放規範。 
支援產品和硬體
參考設計

TIDA-00675 — 使用動態切換的功率降低參考設計

TIDA-00675 展示了使用負載開關動態切換負載的開啟/關閉時，可帶來的節能優勢。此設計指南展示了切換頻率、占空比和放電電阻器的使用如何影響功耗。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGT) 16 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片