首頁 電源管理 DC/DC 電源模組 電源模組 (整合式電感器)

TPS82130

現行

具整合式電感器的 17-V 輸入 3-A 降壓轉換器模組

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同,但引腳輸出與所比較的裝置不同
TPSM82903 現行 具有整合式電感器的 3-V 至 17-V、3-A 高效率、低 IQ 同步降壓轉換器模組 Higher efficiency with lower IQ and improved Vref accuracy.

產品詳細資料

Rating Catalog Topology Buck, Inverting Buck-Boost, Synchronous Buck Iout (max) (A) 3 Vin (max) (V) 17 Vin (min) (V) 3 Vout (max) (V) 6 Vout (min) (V) 0.9 Features Enable, Light-load efficiency, Output discharge, Power good, Tracking Operating temperature range (°C) -40 to 125 Type Module Duty cycle (max) (%) 100 Control mode Constant on-time (COT), DCS-Control Switching frequency (min) (kHz) 1800 Switching frequency (max) (kHz) 2200
Rating Catalog Topology Buck, Inverting Buck-Boost, Synchronous Buck Iout (max) (A) 3 Vin (max) (V) 17 Vin (min) (V) 3 Vout (max) (V) 6 Vout (min) (V) 0.9 Features Enable, Light-load efficiency, Output discharge, Power good, Tracking Operating temperature range (°C) -40 to 125 Type Module Duty cycle (max) (%) 100 Control mode Constant on-time (COT), DCS-Control Switching frequency (min) (kHz) 1800 Switching frequency (max) (kHz) 2200
uSIP (SIL) 8 8.4 mm² 3 x 2.8
  • 3-mm × 2.8-mm × 1.5-mm MicroSiP package
  • 3-V to 17-V input range
  • 3-A continuous output current
  • DCS-Control topology
  • Power save mode for light-load efficiency
  • 20-µA operating quiescent current
  • 0.9-V to 6-V adjustable output voltage
  • 100% duty cycle for lowest dropout
  • Power-good output
  • Programmable soft start-up with tracking
  • Thermal shutdown protection
  • –40°C to 125°C operating temperature range
  • Mandarin data sheet available
  • Create a custom design using the TPS82130 with the WEBENCH Power Designer
  • 3-mm × 2.8-mm × 1.5-mm MicroSiP package
  • 3-V to 17-V input range
  • 3-A continuous output current
  • DCS-Control topology
  • Power save mode for light-load efficiency
  • 20-µA operating quiescent current
  • 0.9-V to 6-V adjustable output voltage
  • 100% duty cycle for lowest dropout
  • Power-good output
  • Programmable soft start-up with tracking
  • Thermal shutdown protection
  • –40°C to 125°C operating temperature range
  • Mandarin data sheet available
  • Create a custom design using the TPS82130 with the WEBENCH Power Designer

The TPS82130 is a 17-V input 3-A step-down converter MicroSiP power module optimized for small solution size and high efficiency. The module integrates a synchronous step-down converter and an inductor to simplify design, reduce external components, and save PCB area. The low profile and compact solution is suitable for automated assembly by standard surface mount equipment.

To maximize efficiency, the converter operates in PWM mode with a nominal switching frequency of 2 MHz and automatically enters power save mode operation at light load currents. In power save mode, the device operates with 20-µA (typical) quiescent current. Using the DCS-Control topology, the device achieves excellent load transient performance and accurate output voltage regulation.

The TPS82130 is a 17-V input 3-A step-down converter MicroSiP power module optimized for small solution size and high efficiency. The module integrates a synchronous step-down converter and an inductor to simplify design, reduce external components, and save PCB area. The low profile and compact solution is suitable for automated assembly by standard surface mount equipment.

To maximize efficiency, the converter operates in PWM mode with a nominal switching frequency of 2 MHz and automatically enters power save mode operation at light load currents. In power save mode, the device operates with 20-µA (typical) quiescent current. Using the DCS-Control topology, the device achieves excellent load transient performance and accurate output voltage regulation.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
TPS82140 現行 具整合式電感器的 17V 輸入 2A 同步降壓轉換器 MicroSiP™ 模組 This product is a pin-compatible 17-V power module with lower output current (2 A).
TPS82150 現行 具整合式電感器的 17V 輸入 1A 同步降壓轉換器 MicroSiP™ 模組 This product is a pin-compatible 17-V power module with lower output current (1 A).

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 34
類型 標題 日期
* Data sheet TPS82130 17-V Input 3-A Step-Down Converter MicroSiP Power Module with Integrated Inductor datasheet (Rev. F) PDF | HTML 2023年 1月 30日
Application brief Solving Power Design Challenges in Enterprise SSD Applications PDF | HTML 2024年 9月 23日
Application note Soldering Considerations for Power Modules (Rev. C) PDF | HTML 2024年 3月 14日
Analog Design Journal Control-Mode Quick Reference Guide (Rev. B) PDF | HTML 2023年 8月 29日
Application note Quick Reference Guide To TI Buck Switching DC/DC Application Notes (Rev. B) PDF | HTML 2022年 5月 23日
Application note Detailed Comparison Between TPSM82903 and TPS82130 PDF | HTML 2022年 3月 31日
Selection guide Innovative DC/DC Power Modules Selection Guide (Rev. D) 2021年 10月 14日
Application note Step-Dwn (Buck) Convrtr Pwer Solutions for Programmable Logic Controller Systems (Rev. A) PDF | HTML 2021年 7月 26日
User guide Manufacturing and Rework Design Guide for MicroSiP™ Power Modules (Rev. A) PDF | HTML 2021年 6月 16日
Application note Non-Isolated Point-of-Load Solutions for Tiger Lake in PC Applications (Rev. B) PDF | HTML 2021年 4月 29日
White paper Enabling Higher Data Rates for Optical Modules With Small and Efficient Power 2021年 3月 22日
Analog Design Journal Methods of output-voltage adjustment for DC/DC converters 2019年 6月 14日
Application note DC/DC Point-of-load Power Solutions for Wired Networking Switch Systems 2018年 12月 11日
Application note Solve Point-of-Load Power Design Challenges: Single Board Computer Applications 2018年 8月 24日
Analog Design Journal Understanding 100% mode in low-power DC/DC converters 2018年 6月 22日
Technical article How to modify a step-down converter to the inverting buck-boost topology PDF | HTML 2018年 5月 17日
Technical article Shrink module size with Flip Chip On Lead (FCOL) package technology PDF | HTML 2018年 4月 20日
Technical article Understanding and improving the thermal performance of a power module PDF | HTML 2018年 2月 12日
Technical article An easy power-module reference design for RF data converter negative voltages PDF | HTML 2017年 10月 11日
Technical article Decoding power module derating curves PDF | HTML 2017年 8月 11日
White paper Benefits and trade-offs of various power-module package options 2017年 8月 2日
Analog Design Journal Improving the thermal performance of a MicroSiP(TM) power module 2017年 7月 24日
Application note Feedforward Capacitor to Improve Stability and Bandwidth of TPS621/821-Family (Rev. A) 2017年 6月 28日
Application note Sequencing and Tracking With the TPS621-Family and TPS821-Family (Rev. A) 2017年 6月 28日
Application note Step-Down LED Driver With Dimming With the TPS621-Family and TPS821-Family (Rev. A) 2017年 6月 28日
Technical article Don’t power your FPGA like this! PDF | HTML 2016年 11月 3日
Analog Design Journal Testing tips for applying external power to supply outputs without an input voltage 2016年 10月 24日
Technical article A smaller step-down power module for communications equipment systems PDF | HTML 2016年 6月 23日
Analog Design Journal Adjusting the soft-start time of an integrated power module 2016年 4月 26日
White paper SiP Power Modules White Paper 2016年 1月 26日
Analog Design Journal Understanding frequency variation in the DCS-Control(TM) topology 2015年 10月 30日
Analog Design Journal High-efficiency, low-ripple DCS-Control offers seamless PWM/pwr-save transitions 2013年 7月 25日
Application note Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs 2011年 9月 19日
Analog Design Journal IQ: What it is, what it isn’t, and how to use it 2011年 6月 17日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS82130EVM-720 — 具有整合式電感器的 TPS82130 17V 輸入、3A 降壓轉換器評估模組

TPS82130EVM-720 的設計旨在幫助使用者輕鬆評估及測試 TPS82130 電源模組的運作及功能。EVM 可在高達 3A 的輸出電流下,將 3V 至 17V 的輸入電壓轉換為 1.8V 穩壓輸出電壓。TPS82130 包含 IC 與電感器,可實現 42 mm² 的整體解決方案尺寸。

使用指南: PDF | HTML
TI.com 無法提供
模擬型號

TPS82130 PSpice Unencrypted Transient Model (Rev. D)

SLVMBG8D.ZIP (180 KB) - PSpice Model
模擬型號

TPS82130 TINA-TI Inverting Buck-Boost Startup Transient Model

SLVMDE6.TSC (501 KB) - TINA-TI Spice Model
模擬型號

TPS82130 TINA-TI Inverting Buck-Boost Steady State Transient Model

SLVMDE7.TSC (486 KB) - TINA-TI Spice Model
模擬型號

TPS82130 TINA-TI Startup Transient Model

SLVMDE4.TSC (502 KB) - TINA-TI Spice Model
模擬型號

TPS82130 TINA-TI Steady State Transient Model

SLVMDE5.TSC (521 KB) - TINA-TI Spice Model
計算工具

SLVC780 Design Tool for Output Voltage Adjustment Using a DAC

Calculator tool to adjust the power supply's output voltage with an analog input voltage
支援產品和硬體

支援產品和硬體

產品
精密 DAC (≤10 MSPS)
DAC43401 具有 Hi-Z、EEPROM、波形產生器和比較器的 8 位元 1 通道電壓輸出智慧型 DAC DAC43608 採用小型 QFN 封裝的 8 位元、8 通道、I2C、電壓輸出 DAC DAC53401 具有 Hi-Z、EEPROM、波形產生器和比較器的 10 位元 1 通道電壓輸出智慧型 DAC DAC53608 採用小型 QFN 封裝的 10 位元 8 通道 I2C 電壓輸出 DAC
電源模組 (整合式電感器)
TPS82084 具備整合式電感器的 2-A、高效率降壓轉換器模組 TPS82085 具整合式電感器的 3A、高效降壓轉換器模組 TPS82130 具整合式電感器的 17-V 輸入 3-A 降壓轉換器模組 TPS82140 具整合式電感器的 17V 輸入 2A 同步降壓轉換器 MicroSiP™ 模組 TPS82150 具整合式電感器的 17V 輸入 1A 同步降壓轉換器 MicroSiP™ 模組 TPSM82810 2.75-V 至 6-V、4-A 降壓模組,採用 3 x 4 mm μSIP 封裝,具有可調整頻率和追蹤功能 TPSM82813 具備選用頻率同步化、可調整緩啟動和追蹤功能的 6V 3A 降壓模組 TPSM82821 具有整合式電感器、採用 2 x 2.5 x 1.1 mm μSIP 封裝的 5.5V 輸入、1A 降壓模組 TPSM82822 具有整合式電感器、採用 2 x 2.5 x 1.1 mm μSIP 封裝的 5.5V 輸入、2A 降壓模組
AC/DC 和 DC/DC 轉換器 (整合式 FET)
TLV62065 採用 2x2 SON 封裝的 3MHz、2A 降壓轉換器 TLV62080 採用 2x2mm SON 封裝的 1.2A 高效降壓轉換器 TLV62084 採用 2x2mm SON 封裝的 2A 高效降壓轉換器 TLV62084A 採用 2x2mm SON 封裝的 2A 高效降壓轉換器 TLV62085 採用 2x2 QFN 的 3-A 高效率降壓轉換器 TLV62090 採用 3x3mm QFN 封裝的 3A 高效降壓轉換器 TLV62095 具 DCS 控制的 4A 同步降壓轉換器 TLV62130 採用 3x3 QFN 封裝的 3-17V 3A 降壓轉換器 TLV62130A 採用 3x3 QFN 封裝且具備 DCS-Control 的 3-17V 3A 降壓轉換器 TLV62150 具 DCS-Control™ 的 4-17V 1A 降壓轉換器 TLV62150A 採用 3x3 QFN 封裝且具 DCS 控制的 4-17V、1A 降壓轉換器 TLV62565 採用 SOT23 封裝的 1.5A 降壓轉換器 TLV62566 採用 SOT23 封裝且具有電源良好的 1.5A 降壓轉換器 TLV62568 採用 SOT23 和 SOT563 封裝的 2.5V-5.5V 輸入、1A 高效率降壓式降壓轉換器 TLV62568A 採用小型 SOT563 封裝且具有強制 PWM 的 2.5V-5.5V 輸入、1A 高效率降壓式降壓轉換器 TLV62569 採用 SOT23 和 SOT563 封裝的 2.5V-5.5V 輸入、2-A 高效率降壓式降壓轉換器 TLV62569A 採用 SOT 封裝並具有強制 PWM 的 2A 高效率降壓轉換器 TLV62585 採用 2x2 QFN 或 SOT563 封裝的 2.5V-5.5V 輸入 3-A 高效降壓轉換器 TPS62000 可調整 600-mA、95% 高效降壓轉換器 TPS62000-HT 高溫高效降壓低功耗 DC-DC 轉換器 TPS62020 可調整 600-mA、95% 高效降壓轉換器、18uA、MSOP-10 TPS62040 採用 MSOP-10 和 QFN、靜態電流為 18 uA 的可調整 1.2-A、95% 高效降壓轉換器 TPS62050 採用 MSOP-10 的可調整 800-mA、10V Vin、95% 高效降壓轉換器 TPS62056 採用 MSOP-10 的 3.3-V 輸出、800-mA、10V Vin、95% 高效降壓轉換器 TPS62060 採用 2x2 SON 封裝的 3MHz、1.6A 降壓轉換器 TPS62065 採用 2x2 SON 封裝的 3MHz、2A 降壓轉換器 TPS62065-Q1 採用 2x2 SON 封裝的 3MHz、2A 汽車降壓轉換器 TPS62067 採用 2x2 SON 封裝的 3MHz、2A 降壓轉換器 TPS62067-Q1 採用 2×2 SON 封裝的車用 3-MHz 2-A 降壓轉換器 TPS62080 採用 2x2mm SON 封裝且具可調式 Vout 的 1.2A 高效率降壓轉換器 TPS62080A 採用 2x2mm SON 封裝的 1.2A 高效降壓轉換器 TPS62085 採用 2x2 HotRod 封裝且具 DCS-Control 和 Hiccup 短路保護功能的 3-A 降壓轉換器 TPS62088 採用 1.2 mm x 0.8 mm WCSP 封裝的 2.4-V 至 5.5-V 輸入、微型 6 針腳 3-A 降壓轉換器 TPS62090 具備 DCS™ Control 的 3A、6V 輸入、效率高達 97% 的同步降壓轉換器 TPS62090-Q1 汽車: 3A、2.5 至 6V 輸入、高達 97% 效率、3x3 QFN 降壓轉換器 TPS62095 具 DCS 控制的 4A 同步降壓轉換器 TPS62097 採用 HotRod 封裝且具可選開關頻率的 2-A 降壓轉換器 TPS62097-Q1 採用 3x3 QFN 封裝並採用可潤濕側翼的 2A 車用降壓轉換器 TPS62100 具有可調整輸出的多模式 300kHz 同步降壓轉換器 TPS62110 採用 QFN-16 的可調式 1.5-A、17-V Vin 降壓轉換器 TPS62110-EP 強化型產品 17V、1.5A 同步降壓轉換器 TPS62110-HT 高溫 17-V、1.5-A 同步降壓轉換器 TPS62110-Q1 採用 QFN-16 封裝的車用 3V 至 17V,1.5A 降壓轉換器 TPS62113 採用 QFN-16 封裝且具 LBI 功能的 1.5-A、17-Vin 降壓轉換器 TPS62120 具備 DCS 控制的 15V、75mA、96% 效率降壓轉換器 TPS62122 15V 75mA 96% 效率的降壓轉換器 TPS62125 具可調整啟用臨界值和磁滯的 3V-17V、300mA 降壓轉換器 TPS62130 採用 3x3 QFN 封裝且具備 DCS-Control 的 3-17V 3A 降壓轉換器 TPS62130A 採用 3x3 QFN 封裝的 3V 至 17V 3-A 降壓轉換器 TPS62130A-Q1 採用 3 × 3 QFN 封裝的 TPS62130A-Q1 3 至 17-V 3-A 汽車降壓轉換器 TPS62135 採用 2x3QFN 封裝且具 1% 精確度和 PFM/強制 PWM 的 3-17V 4.0A 降壓轉換器 TPS62136 採用 2x3QFN 封裝且具 1% 精確度和 PFM/強制 PWM 的 3-17V 4.0A 降壓轉換器 TPS62140 採用 3x3 QFN 封裝且具備 DCS-Control 的 3–17V 2A 降壓轉換器 TPS62140A 採用 3x3 QFN 封裝且具備 DCS-Control 的 3–17V 2A 降壓轉換器 TPS62147 採用 2x3QFN 封裝且具 1% 精確度和 PFM/強制 PWM 的 3-17V 2.0A 降壓轉換器 TPS62148 採用 2x3QFN 封裝且具 1% 精確度和 PFM/強制 PWM 的 3-17V 2.0A 降壓轉換器 TPS62150 採用 3x3 QFN 封裝且具備 DCS-Control 的 3–17V 1A 降壓轉換器 TPS62150A 採用 3x3 QFN 封裝且具備 DCS 控制的3-17V 1A 3MHz 降壓轉換器 TPS62150A-Q1 採用 3 × 3 QFN 封裝的 TPS62150A-Q1 3 至 17-V 1-A 汽車降壓轉換器 TPS62160 具 DCS-Control™ 的 3V-17V 1A 降壓轉換器 TPS62160-Q1 採用 2x2SON 的 3V-17V 1A 車用降壓轉換器 TPS62170 採用 2x2 QFN 封裝且具備 DCS-Control 的 3–17V 0.5A 降壓轉換器 TPS62170-Q1 採用 2x2 QFN 封裝的 3-17V 0.5A 汽車降壓轉換器 TPS62175 具休眠模式的 28V、0.5A 降壓轉換器 TPS62180 具電源良好、1% 準確性和可調式軟啓動的 4 V 至 15 V、6 A 同步降壓轉換器 TPS62184 具有電源良好、1% 準確性和可調式軟啓動的 4 V 至 17 V、6 A 同步降壓轉換器 TPS62200 採用 SOT-23 的可調整 300-mA、95% 高效降壓轉換器 TPS62220 採用 ThinSOT-23、靜態電流為 15uA 的可調整 400-mA、95% 高效降壓控制器 TPS62240 採用 2x2mm SON/TSOT23 封裝的 2.25MHz 300mA 降壓轉換器 TPS62250 2.25MHz、1A 峰值電流限制降壓轉換器 TPS62260 採用 2x2mm SON/TSOT23 封裝的 2.25MHz 600mA 降壓轉換器 TPS62260-Q1 採用 2x2mm SON/TSOT23 封裝的車用 2V 至 6V、2.25MHz 固定頻率 600mA 降壓轉換器 TPS62290 採用 2x2mm SON 封裝的 2.25MHz 1A 降壓轉換器 TPS62290-Q1 採用 2x2mm SON/TSOT23 封裝的車用 2.3V 至 6V、2.25MHz 固定頻率 1A 降壓轉換器 TPS62400 具 1 線介面、採用 QFN 封裝的雙路可調式 400mA 和 600mA、2.25MHz 降壓轉換器 TPS62400-Q1 具 1 線介面的汽車類雙路可調整 400mA 和 600mA、2.25MHz 降壓轉換器 TPS62410 具 1 線介面、採用 QFN 封裝的 2.25MHZ 2x800mA 雙路降壓轉換器 TPS62410-Q1 車用 2.5V 至 6V、2.25MHz 固定頻率雙路 (800mA/800mA) 降壓轉換器 TPS62420 具 1 線介面、採用 QFN 封裝的雙路可調式 600mA 和 1000mA、2.25MHz 降壓轉換器 TPS62420-Q1 具 1 線介面的車用 2.5V 至 6V、2.25MHz 固定頻率雙路 (1A/600mA) 降壓轉換器 TPS62480 6A、2.4V-5.5V 輸入、同步降壓轉換器,具有 PG 輸出、可調整緩啟動和選擇功能 TPS62510 適用低輸入電壓的可調節、96% 效率的 1.5A 降壓轉換器 TPS62560 採用 2x2mm SON 封裝的 2.25MHz 600mA 降壓轉換器 TPS62561 採用 TSOT23 封裝的 2.25MHz 600mA 降壓轉換器 TPS62590 採用 2 x 2 SON 封裝的 2.25MHz、1A 降壓轉換器 TPS62590-Q1 採用 2x2mm SON 封裝的車用 2.5V 至 6V、2.25MHz 固定頻率 1A 降壓轉換器 TPS62750 具可編程輸入電流限制的 2.25MHz 降壓轉換器,適用 USB 供電應用 TPS62751 具可編程輸入電流限制的 2.25MHz 降壓轉換器,適用 USB 供電應用 TPS62770 採用 WCSP 且具有 360nA Iq 降壓和最高至 15V 升壓的小型單晶片雙解決方案 TPS62810-Q1 採用 2mm x 3mm 可潤濕側翼 QFN 封裝的車用 2.75V 至 6V 4A 降壓轉換器 TPS62810M 採用 2-mm x 3-mm QFN 封裝,具有 -55C 擴展溫度的 2.75-V 至 6-V、4-A 降壓轉換器 TPS62821 採用 1.5-mm x 2-mm VSON-HR 封裝,具有 1% 準確度的 2.4-V 至 5.5-V 輸入、1-A 降壓轉換器 TPS62822 採用 1.5-mm x 2-mm VSON-HR 封裝,具有 1% 準確度的 2.4-V 至 5.5-V 輸入、2-A 降壓轉換器 TPS62823 採用 1.5-mm x 2-mm VSON-HR 封裝,具有 1% 準確度的 2.4-V 至 5.5-V 輸入、3-A 降壓轉換器 TPS62825 採用 1.5-mm x 1.5-mm QFN 封裝,具有 1% 準確度的 2.4-V 至 5.5-V 輸入、2-A 降壓轉換器 TPS62826 採用 1.5-mm x 1.5-mm VSON-HR 封裝,具有 1% 準確度的 2.4-V-5.5-V 輸入、3-A 降壓轉換器 TPS62827 採用 1.5-mm x 1.5-mm QFN 封裝,具有 1% 準確度的 2.5-V 至 5.5-V 輸入、4-A 降壓轉換器
Gerber 檔案

PWR720 Gerber

SLVC656.ZIP (296 KB)
參考設計

TIDA-010054 — 適合於 Level 3 電動車充電站的雙向有源電橋參考設計

此參考設計提供單相雙主動橋式 (DAB) DC/DC 轉換器實作概覽。DAB 拓撲結構提供軟切換通訊、減少裝置數量與高效率等優勢。此設計的優勢在於功率密度、成本、重量、電隔離、高電壓轉換比與可靠性,這些都是關鍵要素,因此非常適合應用於 EV 充電站和儲能。DAB 中的模組化與對稱架構可堆疊轉換器,達到高功率傳輸速率,並有利於雙向運作模式來支援電池充電與放電應用。
Design guide: PDF
電路圖: PDF
參考設計

TIDA-01405 — 支援溫度高達 125°C 的 3V 至 15.2V 輸入、2A、–1.8V 反相電源模組參考設計

TIDA-01405 參考設計展示一款反相電源模組(電壓反相器),能從 3V 至 15.2V 的輸入電壓產生 -1.8V 電源軌,最高可提供 2A 電流。此類負電壓在許多通訊設備系統及工業設備(如測試與量測裝置)中皆為必需。採用 TPS82130 電源模組可實現極簡潔的負壓反相器設計(反相升降壓轉換),能在高達 2A 的電流下產生 -1.8V 的負輸出電壓。
Design guide: PDF
電路圖: PDF
參考設計

TIDA-01457 — 適用於小型低雜訊系統的 3V 至 11.5V 輸入電壓、-5V 輸出電壓、1.5A 反相電源模組參考設計

這款精巧且簡單的低雜訊反相電源模組設計(電壓逆變器)可於 3V 至 11.5V 輸入下,提供最高 1.5A 的 –5V 輸出電壓。本設計採用 TI TPS82130 MicroSiP™ 電源模組降壓式轉換器並搭配反相降壓升壓拓撲結構,可實現 584mW/mm³ 的功率密度及小於 50mm² 的解決方案尺寸,因此可於空間有限的高溫通訊設備(如光學模組)中為敏感類比負載供電。此設計也支援許多常見工業設備,包括需要 5V 輸入與 –5V 輸出、最高 1A 的電壓逆變器的設備
Design guide: PDF
電路圖: PDF
參考設計

TIDA-01022 — 適用於 DSO、雷達和 5G 無線測試系統的靈活 3.2-GSPS 多通道 AFE 參考設計

此高速多通道資料擷取參考設計可實現最佳系統性能。系統設計師需考量如高速多通道時脈產生的時脈抖動和偏斜等重要設計參數,這會影響整體系統 SNR、SFDR、通道對通道偏斜和確定性延遲。此參考設計展示了使用 JESD204B 高速資料轉換器、高速放大器、高性能時脈和低雜訊電源解決方案的多通道 AFE 和時脈解決方案,以實現最佳系統性能
Design guide: PDF
電路圖: PDF
參考設計

TIDA-01028 — 適用於高速示波器和寬頻帶數位器的 12.8-GSPS 類比前端參考設計

此參考設計提供交錯式射頻取樣類比數位轉換器 (ADC) 的實際範例,以達到 12.8-GSPS 取樣率。這是透過兩個射頻取樣 ADC 的時間交錯而達成。交錯需要在 ADC 之間進行相位偏移,此參考設計利用 ADC12DJ3200 的無雜訊孔徑延遲調整(tAD 調整)功能來實現此目標。此功能也可用於將交錯式 ADC 的典型不匹配降到最低:將 SNR、ENOB 和 SFDR 性能最大化。此參考設計也具備支援 JESD204B 的低相位雜訊時脈樹。使用 LMX2594 寬頻 PLL 和 LMK04828 合成器和抖動消除器來執行實作。
Design guide: PDF
電路圖: PDF
參考設計

TIDA-010128 — 適用於 12 位元數位器的可擴充 20.8 GSPS 參考設計

此參考設計說明採用時間交錯配置的射頻取樣類比數位轉換器 (ADC) 的 20.8GSPS 取樣系統。時間交錯法是一種經過實證的傳統提升取樣率方式,然而,匹配個別 ADC 偏移、增益與取樣時間不匹配是實現性能的關鍵。交錯的複雜性會隨著取樣時脈較高而增加。ADC 間的相位匹配是實現更佳 SFDR 和 ENOB 的關鍵規格之一。此參考設計使用 ADC12DJ5200RF 上的無雜訊孔徑延遲調整功能,並具備 19fs 精密相位控制步驟,可簡化 20.8GSPS 交錯之執行。此參考設計採用以 LMK04828 和 LMX2594 為基礎的板載低雜訊 JESD204B 時脈鐘產生器,符合 12 (...)
Design guide: PDF
電路圖: PDF
參考設計

PMP21254 — 具有整合式 FET 控制器的 160-A、四相參考設計

此參考設計適用於由 5-V 或 12-V 軌為高電流、低電壓 ASIC 和 FPGA 供電。  此設計針對高密度最佳化,並視需要支援具電流,電壓和溫度遙測功能的 PMBus。  隨附測試報告。
Test report: PDF
電路圖: PDF
參考設計

PMP21814 — 用於通訊處理器電源的 4 相位、160-A 同步降壓轉換器參考設計

此參考設計使用四個具整合式 MOSFET 的 TPS546D24A 轉換器,以 0.9V 輸出支援 160A 全負載。本系統以 650kHz 的切換頻率運作,並具備 PMBus 介面,可用於設定主要轉換器參數,包括內部補償。詳細的測試報告包括效率熱、穩定性和負載暫態結果。
Test report: PDF
電路圖: PDF
參考設計

TIDA-010122 — 適用於多通道射頻系統的參考設計同步數據轉換器 DDC 和 NCO 功能

此參考設計可解決與新興 5G 適配應用相關,例如大規模多輸入多輸出 (mMIMO)、相位陣列雷達與通訊酬載等應用相關的同步設計挑戰。一般 RF 前端包含天線、低雜訊放大器 (LNA)、混波器、類比網域中的本地振盪器 (LO) 及類比轉數位轉換器、數值控制振盪器 (NCO) 和數位降轉換器 (DDC)。為了達到整體系統同步化,這些數位區塊必須與系統時鐘同步。本參考設計採用 ADC12DJ3200 資料轉換器,透過同步處理晶片內建 NCO 與 SYNC ~ 並使用無雜訊孔徑延遲調整 (tAD 調整) 功能,在多個接收器之間達到小於 5-ps 的頻道間偏斜的效果,以進一步降低偏斜。此設計也具備搭載 (...)
Design guide: PDF
電路圖: PDF
參考設計

TIDA-010011 — 用於保護繼電器處理器模組的高效電源供應架構參考設計

此參考設計展示各種電源架構,可為需要 >1A 負載電流和高效率的應用處理器模組產生多重電壓軌。所需的電源是使用來自背板的 5、12 或 24-V DC 輸入所產生。電源供應器是使用配備整合式 FET 的 DC-DC 轉換器,以及具尺寸整合式電感器的電源模組所產生。此設計採用 HotRod™ 封裝類型,適合需要低 EMI 的應用。此外也最適合設計時間有限的應用。其他功能包括 DDR 終端穩壓器、輸入電源 OR-ing、電壓序列、用於過載保護的 eFuse,以及電壓和負載電流監控。此設計可搭配處理器、數位訊號處理器以及現場可編程邏輯閘陣列使用。已通過輻射發射測試,符合 A 類和 B 要求的 (...)
Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
uSIP (SIL) 8 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片