首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器

TPS62080A

現行

採用 2x2mm SON 封裝的 1.2A 高效降壓轉換器

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同,但針腳輸出與所比較的裝置不同。
TPS62825 現行 採用 1.5-mm x 1.5-mm QFN 封裝,具有 1% 準確度的 2.4-V 至 5.5-V 輸入、2-A 降壓轉換器 Smaller 1.5-mm x 1.5-mm QFN pin-to-pin compatible family 1 A, 2 A, 3 A and 4 A

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 1.2 Vin (max) (V) 6 Vin (min) (V) 2.3 Vout (max) (V) 4 Vout (min) (V) 0.5 Features Enable, Light Load Efficiency, Light load efficiency, Output discharge, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Fixed, Synchronous Rectification, UVLO Fixed, UVLO fixed Control mode Constant on-time (COT), DCS-Control Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.0000065 Duty cycle (max) (%) 100
Rating Catalog Topology Buck Iout (max) (A) 1.2 Vin (max) (V) 6 Vin (min) (V) 2.3 Vout (max) (V) 4 Vout (min) (V) 0.5 Features Enable, Light Load Efficiency, Light load efficiency, Output discharge, Over Current Protection, Power good, Pre-Bias Start-Up, Soft Start Fixed, Synchronous Rectification, UVLO Fixed, UVLO fixed Control mode Constant on-time (COT), DCS-Control Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.0000065 Duty cycle (max) (%) 100
WSON (DSG) 8 4 mm² (2 mm × 2 mm)
  • DCS-Control™ Architecture for Fast Transient Regulation
  • Snooze Mode for 6.5-µA Ultra Low Quiescent Current
  • 2.3-V to 6-V Input Voltage Range
  • 100% Duty Cycle for Lowest Dropout
  • Power Save Mode for Light-Load Efficiency
  • Output Discharge Function
  • Short-Circuit Protection
  • Power-Good Output
  • Thermal Shutdown
  • Available in 2-mm × 2-mm 8-Pin WSON Package
  • DCS-Control™ Architecture for Fast Transient Regulation
  • Snooze Mode for 6.5-µA Ultra Low Quiescent Current
  • 2.3-V to 6-V Input Voltage Range
  • 100% Duty Cycle for Lowest Dropout
  • Power Save Mode for Light-Load Efficiency
  • Output Discharge Function
  • Short-Circuit Protection
  • Power-Good Output
  • Thermal Shutdown
  • Available in 2-mm × 2-mm 8-Pin WSON Package

The TPS6208x devices are a family of high frequency synchronous step down converters. With an input voltage range of 2.3 V to 6 V, common battery technologies are supported. Alternatively, the device can be used for low voltage system power rails.

The TPS6208x focuses on high efficiency step-down conversion over a wide output current range. At medium to heavy loads, the converter operates in PWM mode and automatically enters Power Save Mode operation at light load currents to maintain high efficiency over the entire load current range. To maintain high efficiency at very low load or no load currents, a Snooze Mode with an ultra-low quiescent current is implemented. This function, enabled by the MODE pin, increases the run-time of battery driven applications and keeps the standby current at its lowest level to meet green energy standards targeting a low stand-by current.

To address the requirements of system power rails, the internal loop compensation allows a large selection of external output capacitor values in excess of 100 µF. With its DCS-Control™ architecture, excellent load transient performance and output voltage regulation accuracy is achieved. The device is available in 2-mm × 2-mm WSON package with Thermal PAD.

The TPS6208x devices are a family of high frequency synchronous step down converters. With an input voltage range of 2.3 V to 6 V, common battery technologies are supported. Alternatively, the device can be used for low voltage system power rails.

The TPS6208x focuses on high efficiency step-down conversion over a wide output current range. At medium to heavy loads, the converter operates in PWM mode and automatically enters Power Save Mode operation at light load currents to maintain high efficiency over the entire load current range. To maintain high efficiency at very low load or no load currents, a Snooze Mode with an ultra-low quiescent current is implemented. This function, enabled by the MODE pin, increases the run-time of battery driven applications and keeps the standby current at its lowest level to meet green energy standards targeting a low stand-by current.

To address the requirements of system power rails, the internal loop compensation allows a large selection of external output capacitor values in excess of 100 µF. With its DCS-Control™ architecture, excellent load transient performance and output voltage regulation accuracy is achieved. The device is available in 2-mm × 2-mm WSON package with Thermal PAD.

下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 19
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPS6208x 1.2-A High-Efficiency, Step-Down Converter With DCS-Control and Snooze Mode datasheet (Rev. F) PDF | HTML 2016/11/16
應用說明 QFN and SON PCB Attachment (Rev. C) PDF | HTML 2023/12/6
類比設計期刊 Methods of output-voltage adjustment for DC/DC converters 2019/6/14
應用說明 Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 2018/12/11
類比設計期刊 Understanding 100% mode in low-power DC/DC converters 2018/6/22
類比設計期刊 Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold 2017/10/24
應用說明 Extending the Soft Start Time Without a Soft Start Pin (Rev. B) 2017/6/15
類比設計期刊 Testing tips for applying external power to supply outputs without an input voltage 2016/10/24
應用說明 TPS6208x and TLV6208x Device Comparison 2016/10/4
類比設計期刊 Understanding frequency variation in the DCS-Control(TM) topology 2015/10/30
應用說明 Basic Calculation of a Buck Converter's Power Stage (Rev. B) PDF | HTML 2015/8/17
類比設計期刊 Five steps to a great PCB layout for a step-down converter 2015/1/29
類比設計期刊 High-efficiency, low-ripple DCS-Control offers seamless PWM/pwr-save transitions 2013/7/25
應用說明 How to Measure the Control Loop of DCS-Control Devices (Rev. A) 2012/8/9
類比設計期刊 Design considerations for a resistive feedback divider in a DC/DC converter 2012/4/26
EVM User's guide TPS62080, 1.2A, High-Efficiency, Step-Down Converter in 2x2mm SON Package (Rev. A) 2012/2/21
應用說明 Understanding the Absolute Maximum Ratings of the SW Node (Rev. A) 2012/1/13
應用說明 Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs 2011/9/19
類比設計期刊 IQ: What it is, what it isn’t, and how to use it 2011/6/17

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS62080EVM-641 — 1.2-A、高效率降壓轉換器評估模組

The TPS62080EVM-641 is an evaluation module (EVM) for TPS62080. 1.2-A, High-Efficiency, Step-Down Converter. The TPS6208x focuses on high-efficiency, step-down conversion over a wide output current range. At medium-to-heavy loads, the converter operates in PWM mode and automatically enters PFM or (...)

使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發套件

LAUNCHXL-F28379D — 適用 C2000™ Delfino™ MCU 的 F28379D LaunchPad™ 開發套件

LAUNCHXL-F28379D 是適合 TI MCU LaunchPad™ 開發套件生態系統TMS320F2837xDTMS320F2837xSTMS320F2807x 產品的低成本評估與開發工具,與各種插件 BoosterPack(如使用下方「功能」章節中的「建議 BoosterPack™ 外掛程式模組」中建議)相容。此 LaunchPad 開發套件擴充版本支援兩個 BoosterPack 連線。LaunchPad 開發套件提供標準化且容易使用的平台,可在開發您下一個應用程式時派上用場。

 

支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

TPS62080A Unencrypted PSpice Transient Model Package (Rev. B)

SLVM525B.ZIP (106 KB) - PSpice 模型
支援產品和硬體
計算工具

SLVC780 — Design Tool for Output Voltage Adjustment Using a DAC

Calculator tool to adjust the power supply's output voltage with an analog input voltage
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WSON (DSG) 8 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片