首頁 DLP 產品 DLP 控制器和驅動器
首頁
DLP 產品
DLP 控制器和驅動器

DLPC964

現行

DLP991UFLV 數位微鏡裝置 (DMD) 的 DLP® 控制器

立即訂購
產品規格表

DLPC964

現行
產品規格表 立即訂購

產品詳細資料

Component type Controller Chipset family DLP991U Display resolution (max) 4096 x 2176 Operating temperature range (°C) 0 to 85 Rating Catalog
Component type Controller Chipset family DLP991U Display resolution (max) 4096 x 2176 Operating temperature range (°C) 0 to 85 Rating Catalog
FCBGA (ZUM) 1156 1225 mm² 35 x 35
  • Operates the DLP991U DLP® DMD
  • Continuous streaming input data over 12 HSS input lanes up to 120Gbps
  • Enables high-speed pattern rates up to 12.4kHz binary patterns per second
  • 32 lane differential high speed serial interface (HSSI) data bus interface
  • Random DMD block addressing and LOAD2 loading
  • Compatible with a variety of user-defined FPGAs
  • I2C interface for control and status queries
  • Operates the DLP991U DLP® DMD
  • Continuous streaming input data over 12 HSS input lanes up to 120Gbps
  • Enables high-speed pattern rates up to 12.4kHz binary patterns per second
  • 32 lane differential high speed serial interface (HSSI) data bus interface
  • Random DMD block addressing and LOAD2 loading
  • Compatible with a variety of user-defined FPGAs
  • I2C interface for control and status queries

The DLPC964 controller works with the DLP991U digital micromirror device (DMD). The controller provides a high-speed data and control interface for the DMD to enable binary pattern rates up to 12.4kHz. These fast pattern rates set DLP technology apart from other spatial light modulators and offer a strategic advantage for equipment needing fast, accurate, and programmable light steering capability. The DLPC964 provides the required clocking pulses and timing information to the DMD. The unique capability and value offered by the controller make it well-suited to support a wide variety of direct imaging, industrial, and advanced display applications.

In DLP-based electronics solutions, image data is 100% digital from the DLPC964 input port to the projected image. The image stays in digital form and is never converted into an analog signal. The DLPC964 processes the digital input image and converts the data into a format needed by the DMD for proper display. The DMD then steers the light to the location determined by the pixel data loaded into the DMD.

For complete electrical and mechanical specifications of the DLPC964, see the AMD VirtexTM 7 product specification.

Get started with TI DLP® light-control technology page to learn how to get started with the DLPC964.

The DLP advanced light control resources on ti.com accelerate time to market, which include evaluation modules, optical modules manufacturers, and DLP design network partners.

The DLPC964 controller works with the DLP991U digital micromirror device (DMD). The controller provides a high-speed data and control interface for the DMD to enable binary pattern rates up to 12.4kHz. These fast pattern rates set DLP technology apart from other spatial light modulators and offer a strategic advantage for equipment needing fast, accurate, and programmable light steering capability. The DLPC964 provides the required clocking pulses and timing information to the DMD. The unique capability and value offered by the controller make it well-suited to support a wide variety of direct imaging, industrial, and advanced display applications.

In DLP-based electronics solutions, image data is 100% digital from the DLPC964 input port to the projected image. The image stays in digital form and is never converted into an analog signal. The DLPC964 processes the digital input image and converts the data into a format needed by the DMD for proper display. The DMD then steers the light to the location determined by the pixel data loaded into the DMD.

For complete electrical and mechanical specifications of the DLPC964, see the AMD VirtexTM 7 product specification.

Get started with TI DLP® light-control technology page to learn how to get started with the DLPC964.

The DLP advanced light control resources on ti.com accelerate time to market, which include evaluation modules, optical modules manufacturers, and DLP design network partners.
filter 尋找其它 DLP 控制器和驅動器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 日期
* Data sheet DLPC964 Digital Micromirror Device Controller datasheet (Rev. A) PDF | HTML 2024年 9月 5日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DLPLCR99EVM — 用於 0.99 吋 4K Type-A DLP® 數位微型反射鏡元件 (DMD) 的評估模組

DLPLCR99EVM 是 DMD 板 EVM，內含 0.99 吋 4K、Type-A DMD，內含 4096 x 2176 微鏡，且具有 5.4-µm 節距。DLP991U DMD 在高解析度下提供 ~8.9-M 像素，具大型曝光區域。與 DLPLCRC964EVM配對時，使用者可在各種位元深度和曝光時間達到快速模式速率，以符合工業應用所需。

使用指南: PDF | HTML
TI.com 無法提供
開發板

DLPLCR99UVEVM — 適用於 UV 光譜的 DLP991UUV 評估模組

DLPLCR99UVEVM 是 DMD 板 EVM，內含 0.99 吋 4K、Type-A DMD，內含 4096 x 2176 微鏡，且具有 5.4µm 節距。DLP991UUV DMD 在高解析度下提供 ~8.9M 像素，具大型曝光區域。與 DLPLCRC964EVM 配對時，使用者可在各種位元深度和曝光時間達到快速模式速率，以符合工業應用所需。
使用指南: PDF | HTML
要求
開發板

DLPLCRC964EVM — DLPC964 DLP® LightCrafter™ 評估模組

DLPC964 DLP® LightCrafter™ 評估模組 (EVM) 提供參考設計，為支援 DLP991U DMD 的 DLPC964 控制器架構的使用者提供更快的開發週期。此平台從外部 FPGA 主機板接收高速位元平面資料，並在載入至 DLPLCR99EVM 以在 DLP991U DMD 上顯示之前，格式化該位元平面資料。

使用指南: PDF | HTML
TI.com 無法提供
開發套件

INV-3P-DLP991U — In-Vision High-Speed DLP991U Development Kit

The DLP991U Development Kit is a state-of-the-art programmable  and complete DLP evaluation kit tailored for OEMs, engineers and researchers pushing the boundaries of optical precision. Designed around the 0.99” 4K DLP chip, it offers unmatched resolution, frame rate, and pattern control for (...)

從：IN-VISION Technologies AG
造訪合作夥伴網站
韌體

DLPC964-APPS-FPGA-FW — DLPC964 Apps FPGA Configuration Firmware

The Apps FPGA configuration firmware is used for an Apps FPGA board supplied by Xilinx (Virtex-7 VC707). The firmware helps enable customers in demonstrating how to interface with the DLPC964 Controller for sending high speed pattern data to the DLP991U DMD.
支援產品和硬體

支援產品和硬體
開始使用 下載選項
韌體

DLPR964-FW — DLPC964 Configuration and Support Firmware

The DLPR964 configuration and support firmware contains fixed internal test patterns that can be loaded and displayed on the DLP991U DMD. When the firmware is paired with DLPC964 Controller, customers will be able to enable fast patterns on the DLP991U DMD.
支援產品和硬體

支援產品和硬體
開始使用 下載選項
開發模組 (EVM) 的 GUI

DLPLCRC964EVM-SW — DLPC964 reference software for the DLPLCRC964EVM

The TI DLP® DLPC964 GUI allows user to evaluate the DLPLCRC964EVM (DLPC964 controller board), DLPLCR99EVM (DLP991U DMD board) and Apps FPGA (AMD Virtex-7 FPGA VC707 Evaluation Kit) applications.
支援產品和硬體

支援產品和硬體
開始使用 下載選項
計算工具

DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency

This calculator will be used to help customers understand how to model DMD diffraction patterns and efficiency with their specific DMD input parameters and is modeled to the customer’s specific design. Optical modules can also be used with the calculator.
支援產品和硬體

支援產品和硬體
下載
設計工具

DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES

The DLP optical design guidelines presentation provides a comprehensive overview of the guidelines specific to designing an optical system with DLP Products and will help enable customers in their design process.
支援產品和硬體

支援產品和硬體
下載
設計工具

DLPR115 — DLPLCRC964EVM Design Files

Design files include the Schematic, BOM, and PCB layout of the DLPLCRC964EVM board.
支援產品和硬體

支援產品和硬體
下載
封裝 針腳 CAD 符號、佔位空間與 3D 模型
FCBGA (ZUM) 1156 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片