DLPC231-Q1

現行

產品詳細資料

Component type Controller Chipset family DLP4620S-Q1, DLP4621-Q1, DLP5530-Q1, DLP5531-Q1, DLP5532-Q1, DLP5533A-Q1, DLP5534-Q1 Display resolution (max) 1358x566 Operating temperature range (°C) -40 to 105 Rating Automotive
Component type Controller Chipset family DLP4620S-Q1, DLP4621-Q1, DLP5530-Q1, DLP5531-Q1, DLP5532-Q1, DLP5533A-Q1, DLP5534-Q1 Display resolution (max) 1358x566 Operating temperature range (°C) -40 to 105 Rating Automotive
NFBGA (ZEK) 324 225 mm² (15 mm × 15 mm)
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 2: –40°C to 105°C ambient operating temperature
    • Device HBM ESD Classification Level 2
    • Device CDM ESD Classification Level C4B
  • DMD display controller supporting:
    • DLP553x-Q1 and DLP462x-Q1 automotive interior display and exterior lighting chipsets
  • Video processing
    • Scales input image to Match DMD resolution
    • Bezel adjustment up ±50% vertical image position and ±10% horizontal reducing the need for mechanical alignment (HUD)
    • Support for pixel doubling or quadrupling to allow low-resolution video input
    • Gamma correction
  • Embedded processor with error correction (ECC)
    • On-chip diagnostic and self-test capability
    • System diagnostics including temperature monitoring, device interface monitoring, and photodiode monitoring
    • Integrated Management of Smooth Dimming
    • Configurable GPIO
  • No external RAM required, internal SRAM for image processing
  • 600MHz SubLVDS DMD interface for low power and emission
  • Spread spectrum clocking for reduced EMI
  • Video input interface
    • Single OpenLDI (FPD-Link I) port up to 110MHz
    • 24-bit RGB parallel interface up to 110MHz
  • Configurable host control interface
    • Serial Peripheral Interface (SPI) 10MHz
    • I2C (400kHz)
    • Host IRQ signal to provide real-time feedback for critical system errors
  • Interface to TPS99000-Q1 system management and illumination controller
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 2: –40°C to 105°C ambient operating temperature
    • Device HBM ESD Classification Level 2
    • Device CDM ESD Classification Level C4B
  • DMD display controller supporting:
    • DLP553x-Q1 and DLP462x-Q1 automotive interior display and exterior lighting chipsets
  • Video processing
    • Scales input image to Match DMD resolution
    • Bezel adjustment up ±50% vertical image position and ±10% horizontal reducing the need for mechanical alignment (HUD)
    • Support for pixel doubling or quadrupling to allow low-resolution video input
    • Gamma correction
  • Embedded processor with error correction (ECC)
    • On-chip diagnostic and self-test capability
    • System diagnostics including temperature monitoring, device interface monitoring, and photodiode monitoring
    • Integrated Management of Smooth Dimming
    • Configurable GPIO
  • No external RAM required, internal SRAM for image processing
  • 600MHz SubLVDS DMD interface for low power and emission
  • Spread spectrum clocking for reduced EMI
  • Video input interface
    • Single OpenLDI (FPD-Link I) port up to 110MHz
    • 24-bit RGB parallel interface up to 110MHz
  • Configurable host control interface
    • Serial Peripheral Interface (SPI) 10MHz
    • I2C (400kHz)
    • Host IRQ signal to provide real-time feedback for critical system errors
  • Interface to TPS99000-Q1 system management and illumination controller

The DLPC23x-Q1 digital micromirror display (DMD) controller for automotive applications is used in chipsets for interior applications such as HUD and exterior applications such as high-resolution headlights. The DLP553x-Q1 chipset includes a 0.55” DMD and the DLP4621-Q1 chipset includes a 0.46" DMD. Both chipsets also include the TPS99000-Q1 System Management and Illumination Controller. The DLPC23x-Q1 integrates an embedded processor with error code correction (SECDED ECC), enabling host control and real-time feedback, on-chip diagnostics, and system monitoring functions. On-chip SRAM is included to remove the need for external DRAM. Combined with the TPS99000-Q1, the DLPC23x-Q1 supports high dynamic range dimming of over 5000:1 for HUD applications. SubLVDS 600MHz DMD interface allows high DMD refresh rates to generate seamless and brilliant digital images while reducing radiated emissions.

To aid in the design and manufacture of automotive-qualified projectors based on DLP technology, several established optical module manufacturers and design houses can be leveraged to support your design.

The DLPC23x-Q1 digital micromirror display (DMD) controller for automotive applications is used in chipsets for interior applications such as HUD and exterior applications such as high-resolution headlights. The DLP553x-Q1 chipset includes a 0.55” DMD and the DLP4621-Q1 chipset includes a 0.46" DMD. Both chipsets also include the TPS99000-Q1 System Management and Illumination Controller. The DLPC23x-Q1 integrates an embedded processor with error code correction (SECDED ECC), enabling host control and real-time feedback, on-chip diagnostics, and system monitoring functions. On-chip SRAM is included to remove the need for external DRAM. Combined with the TPS99000-Q1, the DLPC23x-Q1 supports high dynamic range dimming of over 5000:1 for HUD applications. SubLVDS 600MHz DMD interface allows high DMD refresh rates to generate seamless and brilliant digital images while reducing radiated emissions.

To aid in the design and manufacture of automotive-qualified projectors based on DLP technology, several established optical module manufacturers and design houses can be leveraged to support your design.

下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 6
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 DLPC23x-Q1 Automotive Digital Micromirror Device Controller datasheet (Rev. I) PDF | HTML 2024/8/16
使用指南 DLPC230-Q1, DLPC230S-Q1 Programmer's Guide for Display Applications (Rev. G) PDF | HTML 2024/7/18
白皮書 Trends in high resolution headlamps 2019/2/18
應用說明 Estimating Mechanical Volume of an Augmented Reality Head-Up Display System 2018/12/28
應用說明 DLP5531-Q1 Chipset Video Processing for Light Control Applications 2018/10/12
白皮書 DLP® Technology: Solar Loading in Augmented Reality Head-up Display Systems 2018/7/22

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DLP4620SQ1EVM — DLP4620-Q1 評估模組

DLP4620SQ1EVM 評估模組 (EVM) 是一套完整的電子子系統,設計目的旨在驅動 DLP4620S-Q1 汽車晶片組。DLP4620S-Q1 晶片組由 0.46” DMD (1358 x 566)、DLPC231-Q1 DMD 控制器和 TPS99000-Q1 PMIC 組成。結合光學元件、RGB LED 與光二極體後,此 EVM 可用於開發車用級 DLP 投影機或影像產生單元,適用於抬頭顯示器、透明車窗顯示器或其他車用顯示器等應用。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

DLP4621Q1EVM — DLP4621-Q1 評估模組

DLP4621Q1EVM 評估模組 (EVM) 是一套完整的電子子系統,設計目的旨在驅動 DLP4621-Q1 汽車晶片組。DLP4621-Q1 晶片組由 0.46” DMD (960 x 480)、DLPC231-Q1 DMD 控制器和 TPS99001-Q1 PMIC 組成。結合光學元件與 LED 後,此 EVM 可用於展示主動調整頭燈系統、無眩光波束轉向、反射交通標誌調光、行人調光、符號投影、OEM 品牌或其他車用顯示器應用。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

DLP5530PGUQ1EVM — DLP5530-Q1 影像產生單元 (PGU) 投影機評估模組

DLP5530PGUQ1EVM 評估模組 (EVM) 是一款車用投影機,專為支援高性能擴增實境抬頭顯示器 (AR-HUD) 影像生成單元 (PGU) 而設計。DLP5530PGUQ1EVM 提供高性能投影機解決方案,搭載光學元件與 LED 光源,並可透過擴散器與擴散器外殼組成完整的 PGU,從而加速開發並縮短產品上市時間。該投影機基於 DLP5530-Q1 晶片組,是一種電子設備 EVM。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

DLP5530Q1EVM — DLP5530-Q1 電子元件評估模組

DLP5530Q1EVM 評估模組 (EVM) 是一套完整的電子子系統,設計目的旨在驅動 DLP5530-Q1 汽車晶片組。DLP5530-Q1 晶片組由 0.55” DMD (1152 x 576)、DLPC230-Q1 DMD 控制器和 TPS99000-Q1 PMIC 組成。結合光學元件、RGB LED 與光二極體後,此 EVM 可用於開發車用級 DLP 投影機或影像產生單元,適用於抬頭顯示器、透明車窗顯示器或其他車用顯示器等應用。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
支援軟體

DLPC110 — DLPC230 Automotive Control Program Lite Software

支援產品和硬體
模擬型號

DLPC231-Q1 BSDL Model

DLPM073.ZIP (6 KB) - BSDL 模型
支援產品和硬體
模擬型號

DLPC231-Q1 IBIS Model

DLPM072.ZIP (437 KB) - IBIS 模型
支援產品和硬體
計算工具

DLP-HUD-LUMEN-CALC — AR HUD Lumen Budget Estimation Calculator

此 Excel 計算機提供一個起點,可估計增擴實境抬頭顯示器 (AR HUD) 中影像產生單元 (PGU) 的整體流明需求。此計算機採用標準 HUD 參數作為輸入,例如視野、虛擬影像距離和眼罩尺寸。計算機使用這些輸入來產生 AR HUD 系統標準設計的估計總流明需求。
支援產品和硬體
計算工具

DLP-HUD-VOLUME-CALC — AR HUD Volume Estimation Calculator

此 Excel 計算機可提供起點,以估算擴增實境抬頭顯示器的整體體積。此計算機採用標準 HUD 參數作為輸入,例如視野、虛擬影像距離和眼罩尺寸。計算機使用這些輸入來估算標準單鏡 AR HUD 系統的總體積。
支援產品和硬體
計算工具

DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency

This calculator will be used to help customers understand how to model DMD diffraction patterns and efficiency with their specific DMD input parameters and is modeled to the customer’s specific design. Optical modules can also be used with the calculator.
支援產品和硬體
設計工具

DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES

The DLP optical design guidelines presentation provides a comprehensive overview of the guidelines specific to designing an optical system with DLP Products and will help enable customers in their design process.
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
NFBGA (ZEK) 324 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片