首頁 DLP 產品 DLP 控制器和驅動器
首頁
DLP 產品
DLP 控制器和驅動器

DLPC230S-Q1

現行

適用於 DLP553x-Q1 晶片組的 DLP® 車用功能安全 DMD 控制器

立即訂購
產品規格表

DLPC230S-Q1

現行
產品規格表 立即訂購

產品詳細資料

Component type Controller Chipset family DLP5530S-Q1 Display resolution (max) 1152 x 576 Operating temperature range (°C) -40 to 105 Rating Automotive TI functional safety category Functional Safety Quality-Managed
Component type Controller Chipset family DLP5530S-Q1 Display resolution (max) 1152 x 576 Operating temperature range (°C) -40 to 105 Rating Automotive TI functional safety category Functional Safety Quality-Managed
PBGA (ZDQ) 324 See data sheet
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 2: –40°C to +105°C ambient operating temperature
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • Functional Safety Quality-Managed
    • Documentation available to aid ISO 26262 functional safety system design up to ASIL-B
  • DMD display controller supporting:
    • DLP553xS-Q1 and DLP462xS-Q1 automotive interior display chipsets
  • Video processing
    • Scales input image to match DMD resolution
    • Bezel adjustment up ±50% vertical image position and ±10% horizontal reducing the need for mechanical alignment (HUD)
    • Support for pixel doubling or quadrupling to allow low resolution video input
    • Gamma correction
  • Embedded processor with error correction (ECC)
    • On-chip diagnostic and self-test capability
    • System diagnostics including temperature monitoring, device interface monitoring, and photodiode monitoring
    • Integrated management of smooth dimming
    • Configurable GPIO
  • No external RAM required, internal SRAM for image processing
  • 600MHz SubLVDS DMD interface for low power and emission
  • Spread spectrum clocking for reduced EMI
  • Video input interface
    • Single OpenLDI (FPD-Link I) port up to 110MHz
    • 24-bit RGB parallel interface up to 110MHz
  • Configurable host control interface
    • Serial peripheral interface (SPI) 10MHz
    • I2C (400kHz)
    • Host IRQ signal to provide real-time feedback for critical system errors
  • Interface to TPS99000S-Q1 system management and illumination controller
  • Qualified for automotive applications
  • AEC-Q100 qualified with the following results:
    • Device temperature grade 2: –40°C to +105°C ambient operating temperature
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • Functional Safety Quality-Managed
    • Documentation available to aid ISO 26262 functional safety system design up to ASIL-B
  • DMD display controller supporting:
    • DLP553xS-Q1 and DLP462xS-Q1 automotive interior display chipsets
  • Video processing
    • Scales input image to match DMD resolution
    • Bezel adjustment up ±50% vertical image position and ±10% horizontal reducing the need for mechanical alignment (HUD)
    • Support for pixel doubling or quadrupling to allow low resolution video input
    • Gamma correction
  • Embedded processor with error correction (ECC)
    • On-chip diagnostic and self-test capability
    • System diagnostics including temperature monitoring, device interface monitoring, and photodiode monitoring
    • Integrated management of smooth dimming
    • Configurable GPIO
  • No external RAM required, internal SRAM for image processing
  • 600MHz SubLVDS DMD interface for low power and emission
  • Spread spectrum clocking for reduced EMI
  • Video input interface
    • Single OpenLDI (FPD-Link I) port up to 110MHz
    • 24-bit RGB parallel interface up to 110MHz
  • Configurable host control interface
    • Serial peripheral interface (SPI) 10MHz
    • I2C (400kHz)
    • Host IRQ signal to provide real-time feedback for critical system errors
  • Interface to TPS99000S-Q1 system management and illumination controller

The DLPC23xS-Q1 digital micromirror device (DMD) Controller for automotive applications is used in chipsets for interior and exterior display applications with a functional safety requirement (such as augmented reality HUDs and windshield clusters). The DLP5530S-Q1 chipset includes a 0.55” DMD and the DLP4620S-Q1 chipset includes a 0.46" DMD. Both chipsets also include the TPS99000S-Q1 System Management and Illumination controller. The DLPC23xS-Q1 integrates an embedded processor with error code correction (SECDED ECC), enabling host control and real-time feedback, on-chip diagnostics, and system monitoring functions. On-chip SRAM is included to remove the need for external DRAM. Combined with the TPS99000S-Q1, the DLPC23xS-Q1 supports high dynamic range dimming of over 5000:1 for HUD applications. SubLVDS 600MHz DMD interface allows high DMD refresh rates to generate seamless and brilliant digital images, while simultaneously reducing radiated emissions.

To aid in the design and manufacture of automotive qualified projectors based on DLP technology, there are a number of established optical module manufacturers and design houses that can be leveraged to support your design.

The DLPC23xS-Q1 digital micromirror device (DMD) Controller for automotive applications is used in chipsets for interior and exterior display applications with a functional safety requirement (such as augmented reality HUDs and windshield clusters). The DLP5530S-Q1 chipset includes a 0.55” DMD and the DLP4620S-Q1 chipset includes a 0.46" DMD. Both chipsets also include the TPS99000S-Q1 System Management and Illumination controller. The DLPC23xS-Q1 integrates an embedded processor with error code correction (SECDED ECC), enabling host control and real-time feedback, on-chip diagnostics, and system monitoring functions. On-chip SRAM is included to remove the need for external DRAM. Combined with the TPS99000S-Q1, the DLPC23xS-Q1 supports high dynamic range dimming of over 5000:1 for HUD applications. SubLVDS 600MHz DMD interface allows high DMD refresh rates to generate seamless and brilliant digital images, while simultaneously reducing radiated emissions.

To aid in the design and manufacture of automotive qualified projectors based on DLP technology, there are a number of established optical module manufacturers and design houses that can be leveraged to support your design.

filter 尋找其它 DLP 控制器和驅動器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能與所比較的裝置相似
DLPC230-Q1 現行 適用於 DLP553x-Q1 晶片組的 DLP® 車用數位微型反射鏡元件 (DMD) 控制器 Non functional safety video controller

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
重要文件 類型 標題 格式選項 日期
* Data sheet DLPC23xS-Q1 Automotive Digital Micromirror Device Controller datasheet (Rev. E) PDF | HTML 2024年 8月 20日
User guide DLPC230-Q1, DLPC230S-Q1 Programmer's Guide for Display Applications (Rev. G) PDF | HTML 2024年 7月 18日
Application note Estimating Mechanical Volume of an Augmented Reality Head-Up Display System 2018年 12月 28日
White paper DLP® Technology: Solar Loading in Augmented Reality Head-up Display Systems 2018年 7月 22日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DLP5530PGUQ1EVM — DLP5530-Q1 影像產生單元 (PGU) 投影機評估模組

DLP5530PGUQ1EVM 評估模組 (EVM) 是一款車用投影機，專為支援高性能擴增實境抬頭顯示器 (AR-HUD) 影像生成單元 (PGU) 而設計。DLP5530PGUQ1EVM 提供高性能投影機解決方案，搭載光學元件與 LED 光源，並可透過擴散器與擴散器外殼組成完整的 PGU，從而加速開發並縮短產品上市時間。該投影機基於 DLP5530-Q1 晶片組，是一種電子設備 EVM。
使用指南: PDF | HTML
TI.com 無法提供
開發板

DLP5530Q1EVM — DLP5530-Q1 電子元件評估模組

DLP5530Q1EVM 評估模組 (EVM) 是一套完整的電子子系統，設計目的旨在驅動 DLP5530-Q1 汽車晶片組。DLP5530-Q1 晶片組由 0.55” DMD (1152 x 576)、DLPC230-Q1 DMD 控制器和 TPS99000-Q1 PMIC 組成。結合光學元件、RGB LED 與光二極體後，此 EVM 可用於開發車用級 DLP 投影機或影像產生單元，適用於抬頭顯示器、透明車窗顯示器或其他車用顯示器等應用。
使用指南: PDF | HTML
TI.com 無法提供
計算工具

DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency

This calculator will be used to help customers understand how to model DMD diffraction patterns and efficiency with their specific DMD input parameters and is modeled to the customer’s specific design. Optical modules can also be used with the calculator.
支援產品和硬體

支援產品和硬體
下載
設計工具

DLP-OMM-SEARCH — DLP® 產品第三方搜尋工具

To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)
View Options
設計工具

DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES

The DLP optical design guidelines presentation provides a comprehensive overview of the guidelines specific to designing an optical system with DLP Products and will help enable customers in their design process.
支援產品和硬體

支援產品和硬體
下載
封裝 針腳 CAD 符號、佔位空間與 3D 模型
PBGA (ZDQ) 324 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片