計算工具
DLPA2000
- High Efficiency RGB LED/Lamp Driver with Buck-Boost DC-to-DC Converter, DMD Supplies, DPP Core Supply, 1.8-V Load Switch, and Measurement System in a Small Chip-Scale Package
- Three Low-Impedance (30 mΩ Typical at 27°C) MOSFET Switches for Channel Selection
- Independent, 10-Bit Current Control per Channel
- 750-mA Max LED Current for DLPA2000 Embedded Applications
- On-Chip Motor Driver
- DMD Regulators
- Requires Only a Single Inductor
- VOFS: 10 V
- VBIAS: 18 V
- VRST: –14 V
- Passive Discharge to GND When Disabled
- DPP 1.1-V Core Supply
- Synchronous Step-Down Converter with Integrated Switching FETs
- Supports up to 600-mA Output Current
- VLED Buck Boost Converter
- Power Save Mode at Light Load Current
- Low-Impedance Load Switch
- VIN Range from 1.8 V to 3.6 V
- Supports up to 200 mA of Current
- Passive Discharge to GND When Disabled
- DMD Reset Signal Generation and Power Supply Sequencing
- 33-MHz Serial Peripheral Interface (SPI)
- Multiplexer for Measuring Analog Signals
- Battery Voltage
- LED Voltage, LED Current
- Light Sensor (for White Point Correction)
- Internal Reference Voltage
- External (Thermistor) Temperature Sensor
- Monitoring and Protection Circuits
- Hot Die Warning and Thermal
- Low-Battery Warning
- Programmable Battery Undervoltage Lockout (UVLO)
- Load Switch UVLO
- Overcurrent and Undervoltage Protection
- DLPA2000 DSBGA Package
- 56-Ball 0.4-mm Pitch
- Die Size: 3.280 mm × 3.484 mm ± 0.03 mm
The DLPA2000 is a dedicated PMIC/RGB LED/lamp driver for the DLP2010 and DLP2010NIR digital micromirror devices (DMD) when used with a DLPC3430, DLPC3435, or DLPC150 digital controller. For reliable operation of these chipsets, it is mandatory to use the DLPA2000.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 10 | 重要文件 | 類型 | 標題 | 格式選項 | 日期 |
|---|---|---|---|---|
| * | Data sheet | DLPA2000 Power Management and LED/Lamp Driver IC datasheet (Rev. B) | PDF | HTML | 2018年 2月 21日 |
| Application note | 開始使用 TI DLP® 顯示技術 (Rev. H) | PDF | HTML | 2024年 5月 3日 | |
| Application note | DLP System Design: Brightness Requirements and Tradeoffs (Rev. C) | PDF | HTML | 2022年 5月 5日 | |
| Technical article | Design ultra-portable 1080p displays thanks to the industry’s smallest full HD mic | PDF | HTML | 2019年 4月 29日 | |
| White paper | TI DLP® Pico™ Technology for smart home applications (Rev. B) | 2019年 2月 8日 | ||
| Application note | DLPC34xx General System Design Guide Application Note (Rev. A) | 2019年 2月 4日 | ||
| Technical article | Designing smaller mobile projection and display applications with DLP Pico product | PDF | HTML | 2018年 10月 9日 | |
| Application note | DLP Technology for Near Eye Display (NED) (Rev. A) | 2017年 8月 4日 | ||
| Application note | PCB Design Requirements for TI DLP Pico TRP Digital Micromirror Devices | 2016年 8月 19日 | ||
| Application note | TI DLP® IntelliBright™ Algorithms for the DLPC343x Controller | 2014年 12月 8日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
計算工具
DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency
This calculator will be used to help customers understand how to model DMD diffraction patterns and efficiency with their specific DMD input parameters and is modeled to the customer’s specific design. Optical modules can also be used with the calculator.
支援產品和硬體
設計工具
DLP-OMM-SEARCH — DLP® 產品第三方搜尋工具
To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)
設計工具
DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES
The DLP optical design guidelines presentation provides a comprehensive overview of the guidelines specific to designing an optical system with DLP Products and will help enable customers in their design process.
支援產品和硬體
參考設計
TIDA-00722 — 適用於 TI DLP® Pico™ 投影機且採用 MSP430 的即時色彩管理參考設計
此參考設計可為 TI DLP® Pico 投影顯示系統實現即時色彩管理。 此參考設計可以使用 LED 在現場對包含 TI DLP Pico 技術顯示器的產品進行自動色彩校正。自動色彩校正允許在 LED 電流的亮度特性隨時間和溫度的變化時校準 LED 電流。 自動白點校正包括色溫和所有顏色的顏色外觀。DLP Pico 顯示器的實作包含 MSP430 MCU 和光學引擎內的 RGB 色彩感測器。
主要優勢：
- 使用色彩感測器進行即時自動白點校正
- 監控彩色點 LED 照明燈
- 監控 LED 效率
- 使用數位色彩感測器來消除類比干擾
- 在執行時可調整顏色暫存器
參考設計
TIDA-00325 — 使用 DLP® 技術的超行動、超低功耗顯示參考設計
This display reference design featuring TI's DLP2010 (.2 WVGA) DMD chipset, was designed to enable ultra-low power and ultra-mobile display applications either embedded inside a system (e.g. smartphone, tablets etc.) or as a standalone accessory module. The chipset used in the design comprises of (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| DSBGA (YFF) | 56 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。