首頁 DLP 產品 工業數位微鏡裝置（DMD） 可見（420 至 700nm）DMD
首頁
DLP 產品
工業數位微鏡裝置（DMD）
可見（420 至 700nm）DMD

DLP6500FLQ

現行

0.65 吋 1080p A 型 DLP® 數位微型反射鏡元件 (DMD)

立即訂購
產品規格表

DLP6500FLQ

現行
產品規格表 立即訂購

產品詳細資料

Illumination wavelength (min) (nm) 400 Illumination wavelength (max) (nm) 700 Display resolution (max) 1080p (1920x1080) Pattern rate, binary (max) (Hz) 11574 Pattern rate, 8-bit (max) (Hz) 1446 Array diagonal (in) 0.65 Micromirror array size 1920 x 1080 Micromirror pitch (mm) 0.0076 Micromirror array orientation Orthogonal Rating Catalog Operating temperature range (°C) 0 to 65
Illumination wavelength (min) (nm) 400 Illumination wavelength (max) (nm) 700 Display resolution (max) 1080p (1920x1080) Pattern rate, binary (max) (Hz) 11574 Pattern rate, 8-bit (max) (Hz) 1446 Array diagonal (in) 0.65 Micromirror array size 1920 x 1080 Micromirror pitch (mm) 0.0076 Micromirror array orientation Orthogonal Rating Catalog Operating temperature range (°C) 0 to 65
DLP-TYPEA.7 (FLQ) 203 1290.32 mm² (0 mm × 0 mm)
  • High Resolution 1080p (1920×1080) Array With >2 Million Micromirrors
    • 0.65-Inch Micromirror Array Diagonal
    • 7.56 µm Micromirror Pitch
    • ±12° Micromirror Tilt Angle (Relative to Flat State)
    • Designed for Corner Illumination
  • Designed for Use With Broadband Visible Light (400 nm – 700 nm)
    • Window Transmission 97% (Single Pass, Through Two Window Surfaces)
    • Micromirror Reflectivity 88%
    • Array Diffraction Efficiency 86%
    • Array Fill Factor 92%
  • Two 16-Bit, Low Voltage Differential Signaling (LVDS), Double Data Rate (DDR) Buses
  • Two Dedicated Controller Options at 400 MHz Input Data Clock Rate
  • DLPC900 Digital Controller
    • Up to 9523 Hz (1-Bit Binary Patterns)
    • Up to 19.7 Giga-bits Per Second (1-Bit Binary Patterns)
    • Up to 1031 Hz (8-Bit Gray Patterns Pre-Loaded With Illumination Modulation), External Input Up to 360 Hz
  • DLPC910 Digital Controller
    • Up to 11574 Hz (1-Bit Binary Patterns)
    • Up to 24 Giga-bits Per Second (1-Bit Binary Patterns)
    • Up to 1446 Hz (8-Bit Gray Patterns With Illumination Modulation)
  • Integrated Micromirror DriverCircuitry
  • Hermetic Package
  • High Resolution 1080p (1920×1080) Array With >2 Million Micromirrors
    • 0.65-Inch Micromirror Array Diagonal
    • 7.56 µm Micromirror Pitch
    • ±12° Micromirror Tilt Angle (Relative to Flat State)
    • Designed for Corner Illumination
  • Designed for Use With Broadband Visible Light (400 nm – 700 nm)
    • Window Transmission 97% (Single Pass, Through Two Window Surfaces)
    • Micromirror Reflectivity 88%
    • Array Diffraction Efficiency 86%
    • Array Fill Factor 92%
  • Two 16-Bit, Low Voltage Differential Signaling (LVDS), Double Data Rate (DDR) Buses
  • Two Dedicated Controller Options at 400 MHz Input Data Clock Rate
  • DLPC900 Digital Controller
    • Up to 9523 Hz (1-Bit Binary Patterns)
    • Up to 19.7 Giga-bits Per Second (1-Bit Binary Patterns)
    • Up to 1031 Hz (8-Bit Gray Patterns Pre-Loaded With Illumination Modulation), External Input Up to 360 Hz
  • DLPC910 Digital Controller
    • Up to 11574 Hz (1-Bit Binary Patterns)
    • Up to 24 Giga-bits Per Second (1-Bit Binary Patterns)
    • Up to 1446 Hz (8-Bit Gray Patterns With Illumination Modulation)
  • Integrated Micromirror DriverCircuitry
  • Hermetic Package

Featuring over 2 million micromirrors in a hermetic package, the high resolution 0.65 1080p digital micromirror device (DMD) is a spatial light modulator (SLM) that modulates the amplitude, direction, and/or phase of incoming light. The unique capability and value offered by the DLP6500, including operation at 405nm, makes it well suited to support a wide variety of industrial, medical, and advanced imaging applications. Reliable function and operation of the DLP6500 requires that it be used in conjunction with the DLPC900 or the DLPC910 digital controllers. This dedicated chipset provides full HD resolution at high speeds and can be easily integrated into a variety of end equipment solutions.

Featuring over 2 million micromirrors in a hermetic package, the high resolution 0.65 1080p digital micromirror device (DMD) is a spatial light modulator (SLM) that modulates the amplitude, direction, and/or phase of incoming light. The unique capability and value offered by the DLP6500, including operation at 405nm, makes it well suited to support a wide variety of industrial, medical, and advanced imaging applications. Reliable function and operation of the DLP6500 requires that it be used in conjunction with the DLPC900 or the DLPC910 digital controllers. This dedicated chipset provides full HD resolution at high speeds and can be easily integrated into a variety of end equipment solutions.
filter 尋找其它 可見（420 至 700nm）DMD
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品。
DLP6500FYE 現行 0.65 吋 1080p s600 DLP® 數位微鏡裝置 (DMD) Lower price
DLP670S 現行 0.67 吋 2716x1600 DLP® 數位微型反射鏡元件 (DMD) Higher resolution
DLP9000 現行 0.9 吋 WQXGA DLP® 數位微型反射鏡元件 (DMD) Higher resolution
DLP5500 現行 0.55 吋 XGA DLP® 數位微型反射鏡元件 (DMD) Lower price
DLP7000 現行 0.7 吋 XGA DLP® 數位微型反射鏡元件 (DMD) Faster pattern rate

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 13
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 DLP6500 0.65 1080p MVSP Type A DMD datasheet (Rev. A) PDF | HTML 2016/10/31
* 勘誤表 DLP® Products Advisory for the DLPR410 and DLPR910 Devices PDF | HTML 2023/2/16
使用指南 DMD Diffraction Efficiency Calculator (Rev. B) PDF | HTML 2026/1/9
白皮書 Using Lasers With DLP DMD Technology (Rev. A) PDF | HTML 2025/8/25
Application brief Highly Scalable TI DLP Technology for 3D Machine Vision (Rev. A) PDF | HTML 2025/8/22
應用說明 Digital Micromirror Device Thermal Considerations Including Pulsed Optical Sources (Rev. B) PDF | HTML 2024/4/4
應用說明 DMD Optical Efficiency for Visible Wavelengths (Rev. B) PDF | HTML 2023/4/10
應用說明 Wavelength Transmittance Considerations for DLP DMD Windows (Rev. E) 2019/12/17
應用說明 Mounting Hardware and Quick Reference Guide for DLP® Advanced Light Control DMDs (Rev. A) PDF | HTML 2018/11/27
應用說明 DMD 101: Introduction to Digital Micromirror Device (DMD) Technology (Rev. B) 2018/2/23
使用指南 TIDA-00362 High-Resolution 3D Scanner for Factory Automation Using DLP Tech (Rev. A) 2016/5/9
技術文章 Printing up the future of innovation with direct imaging lithography PDF | HTML 2015/12/29
應用說明 Geometric Optics for DLP® 2013/12/5

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DLPLCR65FLQEVM — 適用 0.65 吋、1080p、Type-A DLP® 數位微型反射鏡元件 (DMD) 的 DLP6500FLQ 評估模組

DLPLCR65FLQEVM 內含 DLP6500FLQ，是一款 0.65 1080p Type A DMD，其中包含 1920 x 1080 微鏡片及 7.56µm 節距。若與 DLPLCRC910EVM 配對，使用者可獲得 1 位元圖形的高速像素精確控制。此平台可為進階圖形與成像應用提供彈性與高速。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

DLI-3P-DLI6500 — DLP6500 的 DLi6500 1080p 開發套件

The DLi6500 development kit includes the DLPC900 digital controller and supports two .65” 1080p resolution DMDs, either the DLP6500FYE or the DLP6500FLQ. At the heart of the DLi6500 development kit is the DLPC900 digital controller. The DLPC900 allows for high-speed binary pattern rates (...)
使用指南: PDF
從：Digital Light Innovations
支援產品和硬體
開發板

VIALUX-3P-SUPER-910 — 適用於 DLPC910 的 ViALUX 超高速 V 模組

ViALUX 的 SuperSpeed V 模組提供完整子系統，內含 DLPC910 的控制器電路板、數位微型反射鏡元件 (DLP6500FLQ 或 DLP9000X) 及 ALP-4 控制器套件軟體。工業級模組支援高性能立即可用像素等級控制。這些 DLP 子系統專爲新興應用而設計，配備功能豐富的編程介面，可在短時間內推出新產品。

DMD 板的精巧設計透過耦合兩個 PCB (而非只有一個) 邊緣的撓性導線連接，可減少組裝空間。此外，現在使用剛性撓性 PCB，允許撓性連接的角度佈線爲 90°。

透過轉動 DMD 45° 的微鏡鉸鏈軸，可簡化 DMD (...)

從：ViALUX
支援產品和硬體
光學模組

INV-3P-IKARUS — 適用於 DLP6500 的 In-Vision IKARUS Full HD 光學引擎 

In-Vision 的 Ikarus II 是使用藍色波長照明進行 3D 列印應用的光引擎模組系列之一。Ikarus II 基於 DLP6500 晶片組，在不影響光學性能的情況下提供符合成本效益的解決方案。各種現成的投影鏡頭一應俱全。In-Vision 的工程和製造團隊還可以在短時間內提供針對特定波長或投射比的客製化鏡頭或照明系統設計。應用領域：3D 列印、微影、生物工程等工業和科學應用。

從：IN-VISION Technologies AG
支援產品和硬體
光學模組

INV-3P-MERCURY — In-Vision Mercury、DLP6500 架構 3D 量測光引擎

Designed for 3D metrology, scanning and mapping applications, the Mercury light engine is based on TI’s DLP6500 chipset and projects patterns with a resolution of 1440x1080 pixels and an aspect ratio of 4:3. The optical system offers a high depth-of-field, low distortion as well as high MTF values.

從：IN-VISION Technologies AG
支援產品和硬體
光學模組

VIALUX-3P-DLP6500FLQ-I — 適合使用 DLP6500FLQ 之工業的 ViALUX GmbH 光學模組

ViALUX GmbH 是獨立的第三方公司，擁有設計和製造光學模組 (包含數位微鏡裝置、照明光源、光學元件和相關機械的精巧組件) 的專業知識，並且適用於使用 DLP6500FLQ 的工業應用。光學模組及其規格均由第三方公司生產和管理，而非德州儀器，因此預期此清單中所包含的模組目前正由第三方公司生產。
從：ViALUX
支援產品和硬體
光學模組

VIALUX-3P-STAR-065 — 用於 DLP6500 的 ViALUX STAR-065 光學模組

ViALUX’s STAR-065 CORE provides compact optics with options designed for DLP6500FYE or DLP6500FLQ (0.65” 1080p DMDs). It is available as an accessory or an evaluation module with a monochrome high-power LED light source for use with DLP® LightCrafter™ 6500 EVM.

Refer to the ordering links below for (...)
使用指南: PDF
從：ViALUX
支援產品和硬體
光學模組

WDST-3P-PRO6500 — Wintech PRO6500 可立即生產光學引擎

Wintech’s PRO6500 provides a modular, production ready optical engine supporting 0.65” 1080p resolution DMDs – the DLP6500FYE and DLP6500FLQ. This optical engine is optimized for 3D printing, 3D measurement and machine vision applications requiring maximum optical intensity.
從：Wintech Digital Systems Technology
支援產品和硬體
軟體開發套件 (SDK)

DLP-ALC-LIGHTCRAFTER-SDK — 適用於 LightCrafter™ 系列控制器的 DLP® 進階光學控制 SDK

This DLP® Software Development Kit (SDK) supports the DLPC900 controller used in multiple DLP Advanced Light Control LightCrafter™ series evaluation modules. The SDK provides APIs to integrate DLP technology with cameras to create 3D machine vision or 3D printer solutions for a variety of (...)

支援產品和硬體
韌體

DLPC900REF-SW — DLP® LightCrafter 6500 and 9000 Firmware and Software Bundle

德州儀器提供可免費下載的軟體與韌體，讓開發人員能夠透過靈活的進階方式控制 DLP LightCrafter 6500 與 DLP LightCrafter 9000 EVM。參考設計文件讓客戶能夠基於 DLP6500 與 DLP9000 晶片組開發客製化產品。

此軟體包包含以下元件：

  • DLPC900REF-GUI：軟體套件包括適用於 PC 架構圖形使用者介面 (GUI) 的可執行檔案，可輕鬆透過 USB 與 DLPC900 控制器進行通訊。GUI 是使用 QT 函式庫和 QT Creator 開發的。
  • DLPC900REF-JTAG：JTAG 快閃記憶體編程器讓開發人員能夠將 DLPR900 (...)
支援產品和硬體
韌體

DLPR900PROM — DLPC900 Configuration and Support Firmware

The DLPR900 configuration and support firmware enables broad functionality of the DLPC900 digital controller. The DLPC900 offers reliable operation of DLP670S, DLP6500FYE, DLP6500FLQ, and DLP9000 digital micromirror devices (DMDs). Combined with the DLPC900 controller, the DLPR900 firmware (...)

支援產品和硬體
開發模組 (EVM) 的 GUI

DLPC910REF-SW — DLPC910 reference software for the DLPLCRC910EVM

DLPC910 reference software for the DLPLCRC910EVM
支援產品和硬體
模擬型號

DLP6500FLQ IBIS Model

DLPM007.ZIP (19 KB) - IBIS 模型
支援產品和硬體
3D DMD 機械幾何

DLP-FLQ-2509321-3D-DMD — 採用 FLQ 封裝 (7Type-A) 的 DLP6500 DMD 3D-CAD 幾何

This file is a 3D-CAD model of the DMD geometry for use when designing the DMD mounting
支援產品和硬體
計算工具

DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency

This calculator will be used to help customers understand how to model DMD diffraction patterns and efficiency with their specific DMD input parameters and is modeled to the customer’s specific design. Optical modules can also be used with the calculator.
支援產品和硬體
設計工具

DLP-OMM-SEARCH — DLP® 產品第三方搜尋工具

To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)

支援產品和硬體
設計工具

DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES

The DLP optical design guidelines presentation provides a comprehensive overview of the guidelines specific to designing an optical system with DLP Products and will help enable customers in their design process.
支援產品和硬體
設計工具

DLPR110 — DLPLCR65FLQEVM Design Files

支援產品和硬體
設計工具

DLI-3P-ACCESSORIES — 適用於 DLP® 產品的 DLi 配件和組件

Digital Light Innovations (DLi) offers accessories, boards, and assemblies for development and production with DLP® Products. Examples include DMD controller boards, DMD board assemblies, flex cables, DMD mounting hardware assemblies, LED driver boards, and LED & fiber illumination assemblies.
  • (...)
從：Digital Light Innovations
支援產品和硬體
DMD 安裝設計

DLP-7TYPEA-203I-MOUNTING — TypeA 7Size DMD (203i) 的安裝與電子互連資訊

This file includes drawings and 3D-CAD models for Type-A 7 ceramic size DMD mounting concept(s). Information is also included for the socket/interposer used to connect the DMD to a PCB.
支援產品和硬體
參考設計

TIDA-00362 — 使用 DLP® 技術且適用於工廠自動化的高解析度 3D 掃描器

工廠自動化參考設計採用適用於 LightCrafter™ 系列控制器的德州儀器 DLP® 進階光學控制軟體開發套件 (SDK)，讓開發人員可以透過將 TI 數位微鏡裝置 (DMD) 技術與攝影機、感測器、馬達或其他週邊設備整合，輕鬆構建 3D 點雲。高解析度系統擁有超過 2 百萬微鏡，採用搭載 DLP6500 1080p DMD 的 DLP® LightCrafter™ 6500 評估模組 (EVM)，並可靈活控制工業應用中結構光解決方案的精確圖案。

此工廠自動化參考設計採用德州儀器 DLP 軟體開發套件 (SDK)，允許開發人員透過將 TI 數位微鏡裝置 (DMD) (...)
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
DLP-TYPEA.7 (FLQ) 203 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片系列

觀看所有影片

影片