產品詳細資料

Illumination wavelength (min) (nm) 363 Illumination wavelength (max) (nm) 420 Display resolution (max) XGA (1024x768) Pattern rate, binary (max) (Hz) 32552 Pattern rate, 8-bit (max) (Hz) 4069 Array diagonal (in) 0.7 Micromirror array size 1024 x 768 Micromirror pitch (mm) 0.0136 Micromirror array orientation Orthogonal Rating Catalog Operating temperature range (°C) 20 to 30
Illumination wavelength (min) (nm) 363 Illumination wavelength (max) (nm) 420 Display resolution (max) XGA (1024x768) Pattern rate, binary (max) (Hz) 32552 Pattern rate, 8-bit (max) (Hz) 4069 Array diagonal (in) 0.7 Micromirror array size 1024 x 768 Micromirror pitch (mm) 0.0136 Micromirror array orientation Orthogonal Rating Catalog Operating temperature range (°C) 20 to 30
DLP-TYPEA.7 (FLP) 203 1290.32 mm² (0 mm × 0 mm)
  • 0.7-inch diagonal micromirror array
    • 1024 × 768 array of aluminum, micrometer-sized mirrors
    • 13.68-µm micromirror pitch
    • ±12° micromirror tilt angle (Relative to Flat State)
    • Designed for corner illumination
  • Designed for use with UV light (363 to 420 nm):
    • Window transmission 98% (single pass, through two window surfaces)
    • Micromirror reflectivity 88%
    • Array diffraction efficiency 85%
    • Array fill factor 92% (nominal)
  • Two 16-bit, low-voltage Differential Signaling (LVDS) double data rate (DDR) input data buses
  • Up to 400-MHz input data clock rate
  • 40.64-mm by 31.75-mm by 6.0-mm package footprint
  • Hermetic package
  • 0.7-inch diagonal micromirror array
    • 1024 × 768 array of aluminum, micrometer-sized mirrors
    • 13.68-µm micromirror pitch
    • ±12° micromirror tilt angle (Relative to Flat State)
    • Designed for corner illumination
  • Designed for use with UV light (363 to 420 nm):
    • Window transmission 98% (single pass, through two window surfaces)
    • Micromirror reflectivity 88%
    • Array diffraction efficiency 85%
    • Array fill factor 92% (nominal)
  • Two 16-bit, low-voltage Differential Signaling (LVDS) double data rate (DDR) input data buses
  • Up to 400-MHz input data clock rate
  • 40.64-mm by 31.75-mm by 6.0-mm package footprint
  • Hermetic package

DLP7000UV is a digitally controlled MEMS (micro-electromechanical system) spatial light modulator (SLM). When coupled to an appropriate optical system, the DLP7000UV can be used to modulate the amplitude, direction, and/or phase of incoming light.

The DLP7000UV digital micromirror device (DMD) is an addition to the DLP Discovery™ 4100 platform, which enables very fast pattern rates combined with high performance spatial light modulation operating beyond the visible spectrum into the UVA spectrum (363 nm to 420 nm). The DLP7000UV DMD is designed with a special window that is optimized for UV transmission. The DLP Discovery 4100 platform also provides the highest level of individual micromirror control with the option for random row addressing. Combined with a hermetic package, the unique capability and value offered by DLP7000UV makes it well suited to support a wide variety of industrial, medical, and advanced display applications.

The DLP7000UV DMD with a hermetic package is sold with a dedicated DLPC410 controller for high speed pattern rates of >32000 Hz (1-bit binary) and >1900 Hz (8-bit gray), one DLPR410 (DLP Discovery 4100 Configuration PROM), and one DLPA200 (DMD micromirror driver).

DLP7000UV is a digitally controlled MEMS (micro-electromechanical system) spatial light modulator (SLM). When coupled to an appropriate optical system, the DLP7000UV can be used to modulate the amplitude, direction, and/or phase of incoming light.

The DLP7000UV digital micromirror device (DMD) is an addition to the DLP Discovery™ 4100 platform, which enables very fast pattern rates combined with high performance spatial light modulation operating beyond the visible spectrum into the UVA spectrum (363 nm to 420 nm). The DLP7000UV DMD is designed with a special window that is optimized for UV transmission. The DLP Discovery 4100 platform also provides the highest level of individual micromirror control with the option for random row addressing. Combined with a hermetic package, the unique capability and value offered by DLP7000UV makes it well suited to support a wide variety of industrial, medical, and advanced display applications.

The DLP7000UV DMD with a hermetic package is sold with a dedicated DLPC410 controller for high speed pattern rates of >32000 Hz (1-bit binary) and >1900 Hz (8-bit gray), one DLPR410 (DLP Discovery 4100 Configuration PROM), and one DLPA200 (DMD micromirror driver).

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品。
DLP6500FLQ 現行 0.65 吋 1080p A 型 DLP® 數位微型反射鏡元件 (DMD) Visible wavelength support
DLP7000 現行 0.7 吋 XGA DLP® 數位微型反射鏡元件 (DMD) Visible wavelength support
DLP9500UV 現行 0.95 吋 1080p UV DLP® 數位微型反射鏡元件 (DMD) Higher resolution
DLP9000XUV 現行 0.9 吋 WQXGA 高速 UV DLP® 數位微型反射鏡元件 (DMD) Higher resolution

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 14
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 DLP7000UV 0.7XGA 2xLVDS UV Type A DMD datasheet (Rev. E) PDF | HTML 2021/2/18
* 勘誤表 DLP® Products Advisory for the DLPR410 and DLPR910 Devices PDF | HTML 2023/2/16
使用指南 DMD Diffraction Efficiency Calculator (Rev. B) PDF | HTML 2026/1/9
白皮書 Using Lasers With DLP DMD Technology (Rev. A) PDF | HTML 2025/8/25
更多文件說明 TI DLP Technology for Lithography (Rev. F) 2025/8/22
應用說明 System Design Considerations Using TI DLP® Technology in UVA (363 – 420 nm) (Rev. B) PDF | HTML 2024/11/14
應用說明 Digital Micromirror Device Thermal Considerations Including Pulsed Optical Sources (Rev. B) PDF | HTML 2024/4/4
應用說明 DMD Optical Efficiency for Visible Wavelengths (Rev. B) PDF | HTML 2023/4/10
應用說明 Wavelength Transmittance Considerations for DLP DMD Windows (Rev. E) 2019/12/17
應用說明 Mounting Hardware and Quick Reference Guide for DLP® Advanced Light Control DMDs (Rev. A) PDF | HTML 2018/11/27
應用說明 DMD 101: Introduction to Digital Micromirror Device (DMD) Technology (Rev. B) 2018/2/23
技術文章 Printing up the future of innovation with direct imaging lithography PDF | HTML 2015/12/29
技術文章 From 3D Printing to Lithography, TI DLP® Ultraviolet Chipsets Provide Flexible Sol PDF | HTML 2015/8/27
Product overview TI DLP Technology For 3D Printing (Rev. F) PDF | HTML 2015/1/28

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DLPLCR70UVEVM — DLP7000UV DMD 評估板

此 DLP 評估模組 (EVM) 內建 DLP7000UV,是一款 0.7 UV XGA 2xLVDS A 型 DMD,適用於使用 363 – 420 nm 紫外線 (UV) 照明光源的應用。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

DLPLCRC410EVM — DLPLCRC410 評估模組

DLPLCRC410EVM 是一個評估平台,與其他五種 DMD 架構的 EVM 之一搭配使用,可為微影、3D 列印 (SLS 和 SLA)、機器視覺以及標記和編碼等應用展示先進的光學控制。此 EVM 可評估新客戶照明光源、光學元件、演算法和曝光程序,以加快 DLP 技術的潛在評估、客戶學習週期與上市時間。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

DLI-3P-DLI41XX — 用於 DLP Discovery 晶片組的 DLi D4100、D4120、D4130 開發套件

DLi kits for DLP® Discovery™ chipsets (DLPC410 with DLP7000, DLP7000UV, DLP9500 or DLP9500UV DMDs) support custom interface development for industrial and medical systems and instrumentation. Choose among kit options based on desired hardware and software support. DLi4120 kits include (...)
使用指南: PDF | HTML
支援產品和硬體
開發板

WDST-3P-W4100 — Wintech W4100 高速開發套件

The Wintech W4100 development kit provides users with an alternative to Texas Instruments DLP® Discovery™ 4100 development platform. It utilizes the same FPGA platform and same data interfaces for frame rates up to 32,552 Hz and grayscale operation. The W4100 is compatible with the (...)
支援產品和硬體
開發套件

VIALUX-3P-V-MODULES-410 — 適用於 DLPC410 的 ViALUX V 模組

ViALUX V 模組為完整子系統,內含 DLPC410 的控制器電路板、數位微鏡裝置 (DLP650LNIR、DLP7000、DLP7000UV、DLP9500、DLP9500UV),以及經過實證的 ALP 控制器套件軟體。工業級模組支援高性能像素級控制,可立即使用。這些 DLP® 子系統專爲新興應用而設計,具備功能豐富的編程介面,可讓新產品快速上市。V 模組具有不同的介面 (USB 2.0、USB 3.0 和 PCIe),且形狀和尺寸各不相同。
從:ViALUX
支援產品和硬體
光學模組

VIALUX-3P-DLP7000UV-I — 適合使用 DLP7000UV 之工業的 ViALUX GmbH 光學模組

ViALUX GmbH 是獨立的第三方公司,擁有設計和製造光學模組 (包含數位微鏡裝置、照明光源、光學元件和相關機械的精巧組件) 的專業知識,並且適用於使用 DLP7000UV 的工業應用。光學模組及其規格均由第三方公司生產和管理,而非德州儀器,因此預期此清單中所包含的模組目前正由第三方公司生產。
從:ViALUX
支援產品和硬體
應用軟體及架構

VIALUX-3P-ALP-4 — 用於 DLPLCRC410 的 ViALUX ALP-4.1 控制器軟體套件評估模組

ViALUX’ ALP-4.1 is an accessory software package compatible with the DLPLCRC410 evaluation module from Texas Instruments. It supports the built-in hardware components and contains the corresponding driver and controller firmware as well as ViALUX’ FPGA logic design for the EVM board. (...)
從:ViALUX
支援產品和硬體
模擬型號

DLP7000 IBIS Model

DLPC062.ZIP (32 KB) - IBIS 模型
支援產品和硬體
模擬工具

DLPR410-IBIS — DLPR410 IBIS 機型

IBIS file for the DLPR410 PROM device which supports the DLPC410, DLP650LNIR, DLP7000, DLP7000UV, DLP9500 and DLP9500UV.

從:Xilinx
支援產品和硬體
3D DMD 機械幾何

DLP-FLP-2507867-3D-DMD — 採用 FLP 封裝 (7Type-A) 的 DLP7000/UV DMD 3D-CAD 幾何

This file is a 3D-CAD model of the DMD geometry for use when designing the DMD mounting
支援產品和硬體
計算工具

DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency

This calculator will be used to help customers understand how to model DMD diffraction patterns and efficiency with their specific DMD input parameters and is modeled to the customer’s specific design. Optical modules can also be used with the calculator.
支援產品和硬體
設計工具

DLP-OMM-SEARCH — DLP® 產品第三方搜尋工具

To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)

支援產品和硬體
設計工具

DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES

The DLP optical design guidelines presentation provides a comprehensive overview of the guidelines specific to designing an optical system with DLP Products and will help enable customers in their design process.
支援產品和硬體
設計工具

DLI-3P-ACCESSORIES — 適用於 DLP® 產品的 DLi 配件和組件

Digital Light Innovations (DLi) offers accessories, boards, and assemblies for development and production with DLP® Products. Examples include DMD controller boards, DMD board assemblies, flex cables, DMD mounting hardware assemblies, LED driver boards, and LED & fiber illumination assemblies.
  • (...)
支援產品和硬體
DMD 安裝設計

DLP-7TYPEA-203I-MOUNTING — TypeA 7Size DMD (203i) 的安裝與電子互連資訊

This file includes drawings and 3D-CAD models for Type-A 7 ceramic size DMD mounting concept(s). Information is also included for the socket/interposer used to connect the DMD to a PCB.
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
DLP-TYPEA.7 (FLP) 203 Ultra Librarian

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片