TPS62410

Name: TPS62410
Brand: TI
SKU: TPS62410
Price: 0.817 USD

활성

QFN의 1선 인터페이스를 지원하는 2.25MHZ 2x800mA 듀얼 스텝다운 컨버터

지금 주문하기

데이터 시트

document-pdfAcrobat TPS62410 2.25-MHz 2 x 800-mA Dual Step-Down Converter in Small 3 × 3 mm VSON Package datasheet (Rev. A) (영어) PDF | HTML

이 제품의 최신 버전이 있습니다

open-in-new

대안 비교

다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능

TPS62441

활성

2.75V~6V, 듀얼 1A 강압 컨버터(QFN 패키지) Smaller size, improved feature set and performance.

TPS62442

활성

QFN 패키지의 2.75V~6V, 듀얼 2A 또는 3A 및 1A 스텝다운 컨버터 Smaller size, improved feature set and performance.

TPS62410

활성

데이터 시트

지금 주문하기

제품 상세 정보

Rating

Catalog

Topology

Buck

Iout (max) (A)

0.8

Vin (max) (V)

6

Vin (min) (V)

2.5

Vout (max) (V)

6

Vout (min) (V)

0.6

Features

Adaptive/Dynamic Voltage Scaling, Enable, Forced PWM, Light Load Efficiency, Light load efficiency, Synchronous Rectification

Control mode

Voltage mode

Operating temperature range (°C)

-40 to 85

Iq (typ) (A)

0.000032

Duty cycle (max) (%)

100

Rating

Catalog

Topology

Buck

Iout (max) (A)

0.8

Vin (max) (V)

6

Vin (min) (V)

2.5

Vout (max) (V)

6

Vout (min) (V)

0.6

Features

Adaptive/Dynamic Voltage Scaling, Enable, Forced PWM, Light Load Efficiency, Light load efficiency, Synchronous Rectification

Control mode

Voltage mode

Operating temperature range (°C)

-40 to 85

Iq (typ) (A)

0.000032

Duty cycle (max) (%)

100

VSON (DRC)

10

9 mm² 3 x 3

High Efficiency up to 95%
V_IN Range from 2.5 V to 6 V
2.25-MHz Fixed Frequency Operation
Output Current 2 x 800 mA
Adjustable Output Voltage from 0.6 V to V_IN
Optional EasyScale™ One-Pin Serial Interface for
Dynamic Output Voltage Adjustment
Power-Save Mode at Light Load Currents
180° Out of Phase Operation
Output Voltage Accuracy in PWM Mode ±1%
Typical 32-µA Quiescent Current for Both
Converters
100% Duty Cycle for Lowest Dropout
Available in a 10-Pin VSON (3 mm × 3 mm)

High Efficiency up to 95%
V_IN Range from 2.5 V to 6 V
2.25-MHz Fixed Frequency Operation
Output Current 2 x 800 mA
Adjustable Output Voltage from 0.6 V to V_IN
Optional EasyScale™ One-Pin Serial Interface for
Dynamic Output Voltage Adjustment
Power-Save Mode at Light Load Currents
180° Out of Phase Operation
Output Voltage Accuracy in PWM Mode ±1%
Typical 32-µA Quiescent Current for Both
Converters
100% Duty Cycle for Lowest Dropout
Available in a 10-Pin VSON (3 mm × 3 mm)

The TPS62410 device is a synchronous dual step-down DC–DC converter. It provides two independent output voltage rails powered by 1-cell Li-Ion or 3-cell NiMH/NiCD batteries. The device is also suitable to operate from a standard 3.3 V or 5 V voltage rail.

With an input voltage range of 2.5 V to 6 V, the TPS62410 is ideal for battery powered portable applications like smart phones, PDAs, and other portable equipment.

With the EasyScale™ serial interface, the output voltages can be modified during operation. It therefore supports dynamic voltage scaling for low-power DSP and processors.

The TPS62410 operates at 2.25-MHz fixed switching frequency and enter the power-save mode operation at light load currents to maintain high efficiency over the entire load current range. For low-noise applications the devices can be forced into fixed frequency PWM mode by pulling the MODE/DATA pin High. In the shutdown mode, the current consumption is reduced to 1.2 µA. The device allows the use of small inductors and capacitors to achieve a small solution size.

The TPS62410 operates over a free-air temperature range of –40°C to 85°C. It is available in a 10-pin leadless package (3 × 3 mm VSON)

The TPS62410 device is a synchronous dual step-down DC–DC converter. It provides two independent output voltage rails powered by 1-cell Li-Ion or 3-cell NiMH/NiCD batteries. The device is also suitable to operate from a standard 3.3 V or 5 V voltage rail.

With an input voltage range of 2.5 V to 6 V, the TPS62410 is ideal for battery powered portable applications like smart phones, PDAs, and other portable equipment.

With the EasyScale™ serial interface, the output voltages can be modified during operation. It therefore supports dynamic voltage scaling for low-power DSP and processors.

The TPS62410 operates at 2.25-MHz fixed switching frequency and enter the power-save mode operation at light load currents to maintain high efficiency over the entire load current range. For low-noise applications the devices can be forced into fixed frequency PWM mode by pulling the MODE/DATA pin High. In the shutdown mode, the current consumption is reduced to 1.2 µA. The device allows the use of small inductors and capacitors to achieve a small solution size.

The TPS62410 operates over a free-air temperature range of –40°C to 85°C. It is available in a 10-pin leadless package (3 × 3 mm VSON)

filter

기타 DC/DC converters 찾기

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

star

=TI에서 선정한 이 제품의 인기 문서

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.

16개 모두 보기

상위 문서	유형	직함	형식 옵션	날짜
*	Data sheet	TPS62410 2.25-MHz 2 x 800-mA Dual Step-Down Converter in Small 3 × 3 mm VSON Package datasheet (Rev. A)	PDF \| HTML	2015/03/04
	Application note	QFN and SON PCB Attachment (Rev. C)	PDF \| HTML	2023/12/06
	Selection guide	Buck Converter Quick Reference Guide (Rev. B)		2021/04/08
	Analog Design Journal	Methods of output-voltage adjustment for DC/DC converters		2019/06/14
	Application note	Performing Accurate PFM Mode Efficiency Measurements (Rev. A)		2018/12/11
	Selection guide	Power Management Guide 2018 (Rev. R)		2018/06/25
	Analog Design Journal	Understanding 100% mode in low-power DC/DC converters		2018/06/22
	Application note	Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. B)		2017/11/29
	Analog Design Journal	Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold		2017/10/24
	Application note	Extending the Soft Start Time Without a Soft Start Pin (Rev. B)		2017/06/15
	Analog Design Journal	Testing tips for applying external power to supply outputs without an input voltage		2016/10/24
	Application note	Basic Calculation of a Buck Converter's Power Stage (Rev. B)		2015/08/17
	Analog Design Journal	Five steps to a great PCB layout for a step-down converter		2015/01/29
	Analog Design Journal	Design considerations for a resistive feedback divider in a DC/DC converter		2012/04/26
	Application note	Understanding the Absolute Maximum Ratings of the SW Node (Rev. A)		2012/01/13
	Analog Design Journal	IQ: What it is, what it isn’t, and how to use it		2011/06/17