TPS62827
- Available as an integrated-inductor power module: TPSM82821, TPSM82822, and TPSM82823
- DCS-Control topology
- 1% feedback or output voltage accuracy (full temperature range)
- Up to 97% efficiency
- 26mΩ and 25mΩ internal power MOSFETs
- 2.4V to 5.5V input voltage range
- 4µA operating quiescent current
- 2.2MHz switching frequency
- 0.6V to 4V adjustable output voltage
- Power save mode for light load efficiency
- 100% duty cycle for lowest dropout
- Active output discharge
- Power-good output
- Thermal shutdown protection
- Hiccup short-circuit protection
- A forced-PWM version for CCM operation
- Create a custom design using the TPS6282x with the WEBENCH Power Designer
The TPS6282x is an easy-to-use, synchronous step-down DC/DC converters family with a very low quiescent current of only 4µA. Based on the DCS-Control topology, the device provides a fast transient response. The internal reference allows to regulate the output voltage down to 0.6V with a high feedback voltage accuracy of 1% over the junction temperature range of –40°C to 125°C. The family devices are pin-to-pin and BOM-to-BOM compatible. The entire design requires a small 470nH inductor, a single 4.7µF input capacitor, and two 10µF or single 22µF output capacitor.
The TPS6282x is available in two flavors. The first includes an automatically entered power save mode to maintain high efficiency down to very light loads for extending the system battery run-time. The second runs in forced-PWM maintaining a continuous conduction mode to make sure of the least ripple in the output voltage and a quasi-fixed switching frequency. The device features a Power-Good signal and an internal soft-start circuit. The device is able to operate in 100% mode. For fault protection, the device incorporates a HICCUP short-circuit protection as well as a thermal shutdown. The device is available in a 6-pin 1.5mm × 1.5mm QFN package, offering the highest power density design.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS6282x 2.4V to 5.5V Input, 1, 2, 3, 4A Step-Down Converter With 1% Output Accuracy datasheet (Rev. I) | PDF | HTML | 2024/03/11 |
| Selection guide | Buck Converter Quick Reference Guide (Rev. B) | 2021/04/08 | ||
| White paper | Enabling Higher Data Rates for Optical Modules With Small and Efficient Power | 2021/03/22 | ||
| Application brief | Powering VCCINT_VCU Rail in Xilinx® Zynq®UltraScale+™ Family of Multiprocessors | PDF | HTML | 2020/06/08 | |
| White paper | Benefits of a Resistor-to-Digital Converter in Ultra-Low Power Supplies | 2019/10/14 | ||
| Analog Design Journal | Methods of output-voltage adjustment for DC/DC converters | 2019/06/14 | ||
| Technical article | QFN soldering tips and tricks | PDF | HTML | 2018/11/26 | |
| Technical article | Output accuracy varies with temperature – 1% is not always 1% | PDF | HTML | 2018/05/02 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS62827EVM-063 — 1%의 출력 정확도를 지원하는 4A 스텝다운 컨버터 평가 모듈
TPS62827EVM-063 EVM(평가 모듈)은 사용자가 TPS62827 DCS 제어 스텝다운 벅 컨버터의 작동과 기능을 쉽게 평가하고 테스트할 수 있도록 설계되었습니다. 이 EVM은 최대 솔루션 높이가 1mm이고 최대 4A의 출력 전류에서 2.4V~5.5V 입력 전압을 1% 정확도의 1.8V 조정 출력 전압으로 변환합니다. TPS62827은 소형 1.5 x 1.5mm² QFN 패키지로 제공되며, SSD(솔리드 스테이트 드라이브), 컴퓨팅, 공장 자동화 등의 모든 장비 유형에 있는 POL(Point-of-Load) 컨버터를 위한 (...)
TPS62827 SIMPLIS Unencrypted Transient and Average Model
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VSON-HR (DMQ) | 6 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.