TPS62110-Q1

Name: TPS62110-Q1
Brand: TI
SKU: TPS62110-Q1
Price: 1.18 USD

활성

QFN-16 패키지, 차량용 3V~17V, 1.5A 벅 컨버터

지금 주문하기

데이터 시트

document-pdfAcrobat TPS62110-Q1 17-V 1.5-A Synchronous Step-Down Converter datasheet (Rev. A) (영어)

TPS62110-Q1

활성

데이터 시트

지금 주문하기

제품 상세 정보

Rating

Automotive

Topology

Buck

Iout (max) (A)

1.5

Vin (max) (V)

17

Vin (min) (V)

3.1

Vout (max) (V)

16

Vout (min) (V)

1.2

Features

Enable, Forced PWM, Frequency synchronization, Light-load efficiency, Power good, Synchronous rectification

Control mode

Voltage mode

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.00002

Duty cycle (max) (%)

100

Rating

Automotive

Topology

Buck

Iout (max) (A)

1.5

Vin (max) (V)

17

Vin (min) (V)

3.1

Vout (max) (V)

16

Vout (min) (V)

1.2

Features

Enable, Forced PWM, Frequency synchronization, Light-load efficiency, Power good, Synchronous rectification

Control mode

Voltage mode

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.00002

Duty cycle (max) (%)

100

VQFN (RSA)

16

16 mm² 4 x 4

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to
  125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level H2
- Device CDM ESD Classification Level C3B
High-Efficiency Synchronous Step-Down Converter With up to 95% Efficiency
3.1-V to 17-V Operating Input Voltage Range
Adjustable Output Voltage Range From 1.2 V to 16 V
Synchronizable to External Clock Signal up to 1.4 MHz
Up to 1.5-A Output Current
High Efficiency Over a Wide Load Current Range Due to PFM/PWM Operation Mode
100% Maximum Duty Cycle for Lowest Dropout
20-µA Quiescent Current (Typical)
Overtemperature and Overcurrent Protected
Available in 16 Pin QFN Package

Qualified for Automotive Applications
AEC-Q100 Qualified With the Following Results:
- Device Temperature Grade 1: –40°C to
  125°C Ambient Operating Temperature Range
- Device HBM ESD Classification Level H2
- Device CDM ESD Classification Level C3B
High-Efficiency Synchronous Step-Down Converter With up to 95% Efficiency
3.1-V to 17-V Operating Input Voltage Range
Adjustable Output Voltage Range From 1.2 V to 16 V
Synchronizable to External Clock Signal up to 1.4 MHz
Up to 1.5-A Output Current
High Efficiency Over a Wide Load Current Range Due to PFM/PWM Operation Mode
100% Maximum Duty Cycle for Lowest Dropout
20-µA Quiescent Current (Typical)
Overtemperature and Overcurrent Protected
Available in 16 Pin QFN Package

The TPS62110 is a low-noise synchronous step-down dc-dc converter that is ideally suited for systems powered from a 2-cell Li-ion battery or from a 12-V or 15-V rail.

The TPS62110 is a synchronous PWM converter with integrated N-channel and P-channel power MOSFET switches. Synchronous rectification is used to increase efficiency and to reduce external component count. To achieve highest efficiency over a wide load current range, the converter enters a power-saving, pulse-frequency modulation (PFM) mode at light load currents. Operating frequency is typically 1 MHz, allowing the use of small inductor and capacitor values. The device can be synchronized to an external clock signal in the range of 0.8 MHz to 1.4 MHz. For low noise operation, the converter can be operated in PWM-only mode. In the shutdown mode, the current consumption is reduced to less than 2 µA. The TPS62110 is available in the 16-pin (RSA) QFN package and operates over a free-air temperature range of –40°C to 125°C.

The TPS62110 is a low-noise synchronous step-down dc-dc converter that is ideally suited for systems powered from a 2-cell Li-ion battery or from a 12-V or 15-V rail.

The TPS62110 is a synchronous PWM converter with integrated N-channel and P-channel power MOSFET switches. Synchronous rectification is used to increase efficiency and to reduce external component count. To achieve highest efficiency over a wide load current range, the converter enters a power-saving, pulse-frequency modulation (PFM) mode at light load currents. Operating frequency is typically 1 MHz, allowing the use of small inductor and capacitor values. The device can be synchronized to an external clock signal in the range of 0.8 MHz to 1.4 MHz. For low noise operation, the converter can be operated in PWM-only mode. In the shutdown mode, the current consumption is reduced to less than 2 µA. The TPS62110 is available in the 16-pin (RSA) QFN package and operates over a free-air temperature range of –40°C to 125°C.

filter

기타 DC/DC converters 찾기

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

star

=TI에서 선정한 이 제품의 인기 문서

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.

13개 모두 보기

상위 문서	유형	직함	형식 옵션	날짜
*	Data sheet	TPS62110-Q1 17-V 1.5-A Synchronous Step-Down Converter datasheet (Rev. A)		2012/07/26
	Application note	QFN and SON PCB Attachment (Rev. C)	PDF \| HTML	2023/12/06
	Analog Design Journal	Methods of output-voltage adjustment for DC/DC converters		2019/06/14
	Application note	Performing Accurate PFM Mode Efficiency Measurements (Rev. A)		2018/12/11
	Analog Design Journal	Understanding 100% mode in low-power DC/DC converters		2018/06/22
	Analog Design Journal	Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold		2017/10/24
	Analog Design Journal	Testing tips for applying external power to supply outputs without an input voltage		2016/10/24
	Application note	Basic Calculation of a Buck Converter's Power Stage (Rev. B)		2015/08/17
	Analog Design Journal	Five steps to a great PCB layout for a step-down converter		2015/01/29
	Analog Design Journal	Design considerations for a resistive feedback divider in a DC/DC converter		2012/04/26
	Application note	Understanding the Absolute Maximum Ratings of the SW Node (Rev. A)		2012/01/13
	Application note	Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs		2011/09/19
	Analog Design Journal	IQ: What it is, what it isn’t, and how to use it		2011/06/17

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS62110EVM-101 — TPS62110 평가 모듈

The TPS62110EVM-101 is an evaluation tool for the TPS6211x family of high efficiency inductive step-down converters in a 4x4 QFN package. They feature an adjustable or 3.3V and 5V fixed Output option, a maximum of 17V Input Voltage and up to 1.5A Output current. TPS6211x family can supply voltages (...)

사용 설명서: PDF | HTML