전력 관리 DC/DC switching regulators DC/DC converters

TLV62568A

활성

소형 SOT563 패키지에 강제 PWM을 지원하는 2.5V-5.5V 입력, 1A 고효율 스텝다운 벅 컨버터

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPS62824A 활성 강제 PWM을 지원하는 2.4V~5.5V 입력, 1A 스텝다운 컨버터(1.5mm × 1.5mm QFN 패키지) Solution with higher output accuracy (1%) and smaller solution size
TPS62A01A 활성 FPWM(강제 펄스 폭 변조) 기능이 있는 2.5V~5.5V 입력, 1A 출력 스텝다운 컨버터 Higher output voltage accuracy alternative with output discharge.

제품 상세 정보

Rating Catalog Topology Buck Iout (max) (A) 1 Vin (max) (V) 5.5 Vin (min) (V) 2.5 Vout (max) (V) 5.5 Vout (min) (V) 0.6 Features Enable, Forced PWM, Power good, Synchronous Rectification Control mode COT Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000035 Duty cycle (max) (%) 100
Rating Catalog Topology Buck Iout (max) (A) 1 Vin (max) (V) 5.5 Vin (min) (V) 2.5 Vout (max) (V) 5.5 Vout (min) (V) 0.6 Features Enable, Forced PWM, Power good, Synchronous Rectification Control mode COT Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000035 Duty cycle (max) (%) 100
SOT-5X3 (DRL) 6 2.56 mm² 1.6 x 1.6
  • Forced PWM to reduce output voltage ripple
  • Up to 95% efficiency
  • Low RDS(ON) switches: 100 mΩ / 60 mΩ
  • 2.5-V to 5.5-V input voltage range
  • Adjustable output voltage from 0.6 V to VIN
  • 100% duty cycle for lowest dropout
  • 1.5-MHz typical switching frequency
  • Power good output
  • Over current protection
  • Internal soft startup
  • Thermal shutdown protection
  • Available in SOT563 package
  • Pin-to-pin compatible with TLV62568, TLV62569
  • Create a custom design with the WEBENCH® Power Designer
  • Forced PWM to reduce output voltage ripple
  • Up to 95% efficiency
  • Low RDS(ON) switches: 100 mΩ / 60 mΩ
  • 2.5-V to 5.5-V input voltage range
  • Adjustable output voltage from 0.6 V to VIN
  • 100% duty cycle for lowest dropout
  • 1.5-MHz typical switching frequency
  • Power good output
  • Over current protection
  • Internal soft startup
  • Thermal shutdown protection
  • Available in SOT563 package
  • Pin-to-pin compatible with TLV62568, TLV62569
  • Create a custom design with the WEBENCH® Power Designer

The TLV62568A, TLV62569A devices are synchronous step-down buck DC-DC converters optimized for high efficiency and compact solution size. The device integrates switches capable of delivering an output current up to 2 A. At the whole load range, the device operates in pulse width modulation (PWM) mode with 1.5-MHz switching frequency. In shutdown, the current consumption is reduced to less than 2 µA.

An internal soft start circuit limits the inrush current during startup. Other features like over current protection, thermal shutdown protection and power good are built-in. The device is available in a SOT563 package.

The TLV62568A, TLV62569A devices are synchronous step-down buck DC-DC converters optimized for high efficiency and compact solution size. The device integrates switches capable of delivering an output current up to 2 A. At the whole load range, the device operates in pulse width modulation (PWM) mode with 1.5-MHz switching frequency. In shutdown, the current consumption is reduced to less than 2 µA.

An internal soft start circuit limits the inrush current during startup. Other features like over current protection, thermal shutdown protection and power good are built-in. The device is available in a SOT563 package.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
TLV62569A 활성 SOT 패키지에 강제 PWM을 지원하는 2A 고효율 스텝다운 벅 컨버터 Pin-compatible converter with higher ouput current (2 A).
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TLV62568 활성 SOT23 및 SOT563 패키지의 2.5V-5.5V 입력, 1A 고효율 스텝다운 벅 컨버터 SOT23 package with power save mode

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
6개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet TLV6256xA 1-A, 2-A Step Down Converter with Forced PWM in SOT563 Package datasheet (Rev. B) PDF | HTML 2020/02/27
Application note Extend Battery Life with <100 nA IQ Buck Converter Achieving <150 µV Voltage Rip (Rev. A) PDF | HTML 2021/05/07
Selection guide Buck Converter Quick Reference Guide (Rev. B) 2021/04/08
Analog Design Journal Methods of output-voltage adjustment for DC/DC converters 2019/06/14
Technical article How a small SOT563 DC/DC converter supplies multirail power in industrial applicat PDF | HTML 2019/01/21
Analog Design Journal Understanding 100% mode in low-power DC/DC converters 2018/06/22

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TLV62568APEVM-860 — 벅 컨버터 평가 모듈

TLV62568APEVM-860 EVM(평가 모듈)은 사용자가 TLV62568APDRL 스텝다운 벅 컨버터의 작동과 기능을 쉽게 평가하고 테스트할 수 있도록 설계되었습니다. 이 EVM은 최대 1A의 출력 전류에서 2.5V~5.5V 입력 전압을 1.8V 조정 출력 전압으로 변환합니다. TLV62568APDRL은 소형 1.6 x 1.6mm² 5핀 SOT-563 패키지로 제공됩니다.

사용 설명서: PDF
TI.com에서 구매할 수 없음
시뮬레이션 모델

TLV62568A PSpice Unencrypted Transient Model (Rev. B)

SLVMCO1B.ZIP (46 KB) - PSpice Model
시뮬레이션 모델

TLV62568AP PSpice Transient Model

SLVMCM6.ZIP (84 KB) - PSpice Model
계산 툴

SLVC780 Design Tool for Output Voltage Adjustment Using a DAC

Calculator tool to adjust the power supply's output voltage with an analog input voltage
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

레퍼런스 디자인

TIDA-010034 — 부하 지점의 IEEE802.3at Type-1 PoE 및 12V 어댑터 입력에 대한 IP 네트워크 카메라용 레퍼런스 설계

PoE(Power over Ethernet)를 사용하면 데이터 스트림의 혼선, 간섭 또는 손상 위험 없이 데이터와 동일한 이더넷 케이블을 통해 전력을 전송할 수 있습니다. 이 레퍼런스 설계는 TI의 DaVinci™ 디지털 미디어 프로세서 또는 다른 애플리케이션 프로세서에 기반을 둔 PoE 또는 12V 어댑터를 사용하여 전원이 공급되는 IP 네트워크 카메라용 엔드 투 엔드 전원 트리를 보여줍니다. 전원 트리는 또한 다음과 같이 IP 네트워크 카메라의 다양한 주변 장치에 필요한 레일도 파생합니다. 이미지 센서, 모터 제어, 이더넷 (...)
Design guide: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
SOT-5X3 (DRL) 6 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상