이 제품의 최신 버전이 있습니다
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
TPS62290-Q1
- Qualified for Automotive Applications
- High Efficiency Step-Down Converter
- Output Current up to 1000 mA
- VIN Range From 2.3 V to 6 V
- 2.25-MHz Fixed Frequency Operation
- Power Save Mode at Light Load Currents
- Output Voltage Accuracy in PWM mode ±1.5%
- Fixed Output Voltage Options
- Typical 15-µA Quiescent Current
- 100% Duty Cycle for Lowest Dropout
- Voltage Positioning at Light Loads
- Available in a 2-mm × 2-mm × 0.8-mm SON
Package
The TPS6229x-Q1 is a highly efficient synchronous step-down buck converter optimized for automotive low input voltage applications, and provides up to 1000-mA output current..
With an input voltage range of 2.3 V to 6 V, and an output voltage accuracy of 1.5%, the device powers a large variety of automotive applications.
The TPS6229x-Q1 operates at 2.25-MHz fixed switching frequency and enters Power Save Mode operation with typical quiescent current of 15 µA at light load currents to maintain a high efficiency over the entire load current range.
The Power Save Mode is optimized for low output voltage ripple. For low noise applications, the device can be forced into fixed frequency PWM mode by pulling the MODE pin high. In the shutdown mode, the current consumption is reduced to less than 1 µA. The TPS6229x-Q1 allows the use of small inductors and capacitors to achieve a small solution size.
The TPS6229x-Q1 is available in a 2-mm × 2-mm 6-pin SON package.
관심 가지실만한 유사 제품
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능.
기술 자료
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS62290EVM-279 — TPS62290 6V 입력, 1.8V 출력, 1A 평가 모듈
The TPS62290EVM-279 facilitates evaluation of the TPS62290 1 A Step Down Converter in 2 x 2 SON Package.
SLVC780 — Design Tool for Output Voltage Adjustment Using a DAC
PMP9769 — 낮은 중간 전압을 사용하는 차량용 eCall 전원 공급 장치 레퍼런스 디자인
이 레퍼런스 설계에는 차량용 환경의 독립형 eCall(응급 통화) 시스템을 위한 완전한 전원 관리 솔루션이 포함되어 있습니다. 회로는 차량 배터리 레일에서 직접 공급됩니다. 또한 차량 배터리 레일을 사용할 수 없는 경우에 eCall 시스템에 전원을 공급하기 위해 백업 배터리를 관리합니다. 여기에는 사용 가능한 전원 레일을 4개의 DC/DC 컨버터로 직접 라우팅하는 전원 경로 관리가 포함되어 있으며, 이 컨버터들은 eCall 시스템의 필수 기능 블록에 전원을 공급합니다. 이 솔루션은 백업 배터리로 전원을 공급받는 동안 최대 효율로 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WSON (DRV) | 6 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.