전력 관리 DC/DC switching regulators DC/DC converters

TLV62585

활성

2.5V-5.5V 입력, 2x2 QFN 또는 SOT563 패키지의 3A 고효율 스텝다운 컨버터

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPS62826 활성 1.5mm × 1.5mm QFN 패키지의 1% 출력 정확성을 지원하는 2.4V~5.5V 입력, 4A 스텝다운 컨버터 Converter with higher output voltage accuracy, higher switching frequency (2.2 MHz) in a smaller 1.5-mm x 1.5-mm QFN package.

제품 상세 정보

Rating Catalog Topology Buck Iout (max) (A) 3 Vin (max) (V) 5.5 Vin (min) (V) 2.5 Vout (max) (V) 5.5 Vout (min) (V) 0.6 Features Enable, Light Load Efficiency, Light load efficiency, Output discharge, Over Current Protection, Power good, Pre-Bias Start-Up, Synchronous Rectification, UVLO Fixed, UVLO fixed Control mode COT Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000035 Duty cycle (max) (%) 100
Rating Catalog Topology Buck Iout (max) (A) 3 Vin (max) (V) 5.5 Vin (min) (V) 2.5 Vout (max) (V) 5.5 Vout (min) (V) 0.6 Features Enable, Light Load Efficiency, Light load efficiency, Output discharge, Over Current Protection, Power good, Pre-Bias Start-Up, Synchronous Rectification, UVLO Fixed, UVLO fixed Control mode COT Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000035 Duty cycle (max) (%) 100
SOT-5X3 (DRL) 6 2.56 mm² 1.6 x 1.6 VQFN-HR (RWT) 12 4 mm² 2 x 2
  • Up to 95% efficiency
  • Low RDS(ON) power switches 56 mΩ / 32 mΩ
  • 2.5-V to 5.5-V input voltage range
  • Adjustable output voltage from 0.6-V to VIN
  • Power save mode for light load efficiency
  • 100% duty cycle for lowest dropout
  • 35-µA operating quiescent current
  • 1.5-MHz typical switching frequency
  • Short circuit protection (HICCUP)
  • Output discharge
  • Power good output
  • Thermal shutdown protection
  • Available in 2-mm × 2-mm QFN or 1.6-mm x 1.6-mm SOT563 package
  • Create a custom design using the TLV62585 with the WEBENCH® Power Designer
  • Up to 95% efficiency
  • Low RDS(ON) power switches 56 mΩ / 32 mΩ
  • 2.5-V to 5.5-V input voltage range
  • Adjustable output voltage from 0.6-V to VIN
  • Power save mode for light load efficiency
  • 100% duty cycle for lowest dropout
  • 35-µA operating quiescent current
  • 1.5-MHz typical switching frequency
  • Short circuit protection (HICCUP)
  • Output discharge
  • Power good output
  • Thermal shutdown protection
  • Available in 2-mm × 2-mm QFN or 1.6-mm x 1.6-mm SOT563 package
  • Create a custom design using the TLV62585 with the WEBENCH® Power Designer

The TLV62585 device is a high-frequency synchronous step-down converter optimized for compact solution size and high efficiency. The device integrates switches capable of delivering an output current up to 3 A. At medium to heavy loads, the converter operates in pulse width modulation (PWM) mode with typical 1.5-MHz switching frequency. At light load, the device automatically enters Power Save Mode (PSM) to maintain high efficiency over the entire load current range. In shutdown, the current consumption is reduced to less than 2 µA.

The internal compensation circuit allows a compact solution and small external components. An internal soft start circuit limits the inrush current during startup. Other features like short circuit protection, thermal shutdown protection, output discharge and power good are built-in.

The device is available in a 2-mm × 2-mm QFN or 1.6-mm x 1-6-mm SOT563 package.

The TLV62585 device is a high-frequency synchronous step-down converter optimized for compact solution size and high efficiency. The device integrates switches capable of delivering an output current up to 3 A. At medium to heavy loads, the converter operates in pulse width modulation (PWM) mode with typical 1.5-MHz switching frequency. At light load, the device automatically enters Power Save Mode (PSM) to maintain high efficiency over the entire load current range. In shutdown, the current consumption is reduced to less than 2 µA.

The internal compensation circuit allows a compact solution and small external components. An internal soft start circuit limits the inrush current during startup. Other features like short circuit protection, thermal shutdown protection, output discharge and power good are built-in.

The device is available in a 2-mm × 2-mm QFN or 1.6-mm x 1-6-mm SOT563 package.

다운로드 스크립트와 함께 비디오 보기 비디오

관심 가지실만한 유사 제품

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPS62823 활성 1.5mm × 1.5mm VSON-HR 패키지의 1% 정확성을 지원하는 2.4V~5.5V 입력, 3A 스텝다운 컨버터 Converter with higher output voltage accuracy, higher switching frequency (2.2 MHz) in a smaller 2-mm x 1.5-mm QFN package.
비교 대상 장치와 유사한 기능
TLV62568 활성 SOT23 및 SOT563 패키지의 2.5V-5.5V 입력, 1A 고효율 스텝다운 벅 컨버터 2.5 to 5.5-Vin, 1-A converter available in SOT23 and SOT563 package.
TLV62569 활성 SOT23 및 SOT563 패키지의 2.5V-5.5V 입력, 2A 고효율 스텝다운 벅 컨버터 2.5 to 5.5-Vin, 2-A converter available in SOT23 and SOT563 package.

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
8개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet TLV62585 3-A High Efficiency Synchronous Buck Converter in QFN or SOT563 Package datasheet (Rev. F) PDF | HTML 2019/11/25
Application note Quick Reference Guide To TI Buck Switching DC/DC Application Notes (Rev. B) PDF | HTML 2022/05/23
Application note Thermal Comparison of a DC-DC Converter in SOT23 and the New SOT563 (Rev. A) PDF | HTML 2021/10/28
Selection guide Buck Converter Quick Reference Guide (Rev. B) 2021/04/08
Analog Design Journal Methods of output-voltage adjustment for DC/DC converters 2019/06/14
Technical article How a small SOT563 DC/DC converter supplies multirail power in industrial applicat PDF | HTML 2019/01/21
Analog Design Journal Understanding 100% mode in low-power DC/DC converters 2018/06/22
Analog Design Journal Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold 2017/10/24

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TLV62585EVM-824 — TLV62585 3A, 고효율 스텝다운 컨버터 평가 모듈

TLV62585EVM-824 EVM(평가 모듈)은 사용자가 TLV62585RWT 스텝다운 벅 컨버터의 작동과 기능을 쉽게 평가하고 테스트할 수 있도록 설계되었습니다. 이 EVM은 최대 3A의 출력 전류에서 2.5V~5.5V 입력 전압을 1.8V 조정 출력 전압으로 변환합니다. TLV62585RWT는 소형 2 x 2 mm² QFN 패키지로 제공됩니다.

사용 설명서: PDF
TI.com에서 구매할 수 없음
평가 보드

TLV62585PEVM-030 — 벅 컨버터 평가 모듈

TLV62585PEVM-030 EVM(평가 모듈)은 사용자가 TLV62585XDRL 스텝다운 벅 컨버터의 작동과 기능을 쉽게 평가하고 테스트할 수 있도록 설계되었습니다. 이 EVM은 최대 3A의 출력 전류에서 2.5V~5.5V 입력 전압을 1.8V 조정 출력 전압으로 변환합니다. TLV62585XDRL은 소형 1.6 x 1.6mm² SOT-563 패키지로 제공됩니다.

사용 설명서: PDF
TI.com에서 구매할 수 없음
시뮬레이션 모델

TLV62585 PSpice Unencrypted Transient Model (Rev. B)

SLVMC80B.ZIP (88 KB) - PSpice Model
시뮬레이션 모델

TLV62585 SIMPLIS Transient and Average Model

SLVMDA7.ZIP (687 KB) - SIMPLIS Model
계산 툴

SLVC780 Design Tool for Output Voltage Adjustment Using a DAC

Calculator tool to adjust the power supply's output voltage with an analog input voltage
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

패키지 CAD 기호, 풋프린트 및 3D 모델
SOT-5X3 (DRL) 6 Ultra Librarian
VQFN-HR (RWT) 12 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상