The TMAG5133 is an in-plane Hall-effect switch designed to replace TMR, AMR and Reed switches. The device is optimized to enable small form factors across industrial and consumer applications with ultra-low power consumption, wide supply and temperature ranges.
The TMAG5133 has two unipolar outputs or a single omnipolar which enable the device to react to external magnetic fields. When the applied magnetic flux density through the sensor axis of sensitivity exceeds the operate point threshold (BOP), the device outputs a low voltage on the respective pin. The output stays low until the magnetic flux density decreases to less than the release point threshold (BRP), after which the device outputs a high voltage.
To minimize power consumption, the TMAG5133 is internally duty-cycled. The device has a push-pull output which eliminates the need for an external pullup resistor, and is available in an industry standard X1LGA package.
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TMAG5133 Low-Power, In-plane High Sensitivity Hall-Effect Switch datasheet (Rev. A) | PDF | HTML | 2025/06/30 |
| Application note | Replacing Reed and Magnetoresistive Switches With Cost-Effective, Low-Power Hall-Effect Switches (Rev. B) | PDF | HTML | 2025/08/05 | |
| Application brief | Benefits of Hall-Effect Sensors in Contact Sensors (Rev. B) | PDF | HTML | 2025/07/22 | |
| Application brief | How Hall-Effect Sensors are Used in Electronic Smart Locks (Rev. B) | PDF | HTML | 2025/07/22 | |
| Application note | Position Sensing in Electronic Smart Locks Using Hall-Effect Sensors (Rev. B) | PDF | HTML | 2025/07/22 |
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| X1LGA (ZFC) | 4 | Ultra Librarian |
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.