SLVUAD3A March   2015  – May 2021 TPS62184

 

  1.   Trademarks
  2. 1Introduction
    1. 1.1 Performance Specification
    2. 1.2 Modifications
      1. 1.2.1 Changing the Output Voltage
      2. 1.2.2 Input and Output Capacitors
      3. 1.2.3 Lower Profile Solutions
      4. 1.2.4 Configurable Enable Threshold Voltage
  3. 2Setup
    1. 2.1 Input/Output Connector Descriptions
    2. 2.2 Setup
  4. 3TPS62184EVM-581 Test Results
  5. 4Board Layout
  6. 5Schematic and Bill of Materials
    1. 5.1 Schematic
    2. 5.2 Bill of Materials
  7. 6Revision History

1.2.3 Lower Profile Solutions

The TPS62184EVM-581 supports modifications to achieve a lower total solution profile (height). The current EVM gives a maximum height of 2.1 mm. To obtain a lower profile solution, replace both inductors L1 and L2 with a suitable inductor of lower height. An option is the DFE252012P series from Toko which has a maximum profile of 1.2 mm. These inductors fit well on the existing pads for L1 and L2.