ZHCSJ85F June   2005  – January 2023 TMP300

PRODUCTION DATA  

  1. 1特性
  2. 2应用
  3. 3说明
  4. 4Revision History
  5. 5Pin Configuration and Functions
  6. 6Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Electrical Characteristics
    4. 6.4 Typical Characteristics
  7. 7Detailed Description
    1. 7.1 Overview
    2. 7.2 Feature Description
      1. 7.2.1 Calculating RSET
      2. 7.2.2 Using VTEMP to Trip the Digital Output
      3. 7.2.3 Analog Temperature Output
      4. 7.2.4 Using a DAC to Set the Trip Point
      5. 7.2.5 Hysteresis
  8. 8Device and Documentation Support
    1. 8.1 接收文档更新通知
    2. 8.2 支持资源
    3. 8.3 Trademarks
    4. 8.4 Electrostatic Discharge Caution
    5. 8.5 术语表
  9. 9Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

6.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)(1)
MIN MAX UNIT
V+ Supply voltage +18 V
Signal input pins, voltage(2) –0.5 (V+) + 0.5 V
Signal input pins, current(2) –10 10 mA

Input current into any pin

10

mA
ISC Output short-circuit(3) Continuous
Open-drain output (V+) + 0.5 V
TA Functional temperature –40 +150 °C
Tstg Storage temperature –55 +150 °C
TJ Junction temperature +150 °C
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Input pins are diode-clamped to the power-supply rails. Input signals that can swing more than 0.5V beyond the supply rails should be current limited to 10mA or less.
(3) Short-circuit to ground.