ZHCSO44C February   2021  – December 2021 TCAN1044A-Q1 , TCAN1044AV-Q1

PRODUCTION DATA  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 Revision History
  5. 5 Device Comparison
  6. 6 Pin Configuration and Functions
  7. 7 Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings
    3. 7.3  ESD Ratings - IEC Specifications
    4. 7.4  Recommended Operating Conditions
    5. 7.5  Thermal Characteristics
    6. 7.6  Supply Characteristics
    7. 7.7  Dissipation Ratings
    8. 7.8  Electrical Characteristics
    9. 7.9  Switching Characteristics
    10. 7.10 Typical Characteristics
  8. 8 Parameter Measurement Information
  9. 9 Detailed Description
    1. 9.1 Overview
    2. 9.2 Functional Block Diagram
    3. 9.3 Feature Description
      1. 9.3.1 Pin Description
        1. 9.3.1.1 TXD
        2. 9.3.1.2 GND
        3. 9.3.1.3 VCC
        4. 9.3.1.4 RXD
        5. 9.3.1.5 VIO
        6. 9.3.1.6 CANH and CANL
        7. 9.3.1.7 STB (Standby)
      2. 9.3.2 CAN Bus States
      3. 9.3.3 TXD Dominant Timeout (DTO)
      4. 9.3.4 CAN Bus short-circuit current limiting
      5. 9.3.5 Thermal Shutdown (TSD)
      6. 9.3.6 Undervoltage Lockout
      7. 9.3.7 Unpowered Device
      8. 9.3.8 Floating pins
    4. 9.4 Device Functional Modes
      1. 9.4.1 Operating Modes
      2. 9.4.2 Normal Mode
      3. 9.4.3 Standby Mode
        1. 9.4.3.1 Remote Wake Request via Wake-Up Pattern (WUP) in Standby Mode
      4. 9.4.4 Driver and Receiver Function
  10. 10Application Information Disclaimer
    1. 10.1 Application Information
    2. 10.2 Typical Application
      1. 10.2.1 Design Requirements
        1. 10.2.1.1 CAN Termination
      2. 10.2.2 Detailed Design Procedures
        1. 10.2.2.1 Bus Loading, Length and Number of Nodes
    3. 10.3 System Examples
  11. 11Power Supply Recommendations
  12. 12Layout
    1. 12.1 Layout Guidelines
    2. 12.2 Layout Example
  13. 13Device and Documentation Support
    1. 13.1 接收文档更新通知
    2. 13.2 支持资源
    3. 13.3 Trademarks
    4. 13.4 Electrostatic Discharge Caution
    5. 13.5 术语表

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

7.3 ESD Ratings - IEC Specifications

VALUE UNIT
VESD System level Electrostatic discharge CAN bus terminals to GND  Unpowered contact discharge per ISO 10605 (1) ±8000 V
SAE J2962-2 per ISO 10605
Powered Contact Discharge (2) 		±8000 V
SAE J2962-2 per ISO 10605 Powered Air Discharge (2) ±15000 V
VTran Transient voltage per ISO 7637-2(3) Pulse 1 –100 V
Pulse 2a 75 V
Pulse 3a –150 V
Pulse 3b 100 V
Transient voltage per ISO 7637-3(4) DCC slow transient pulse ±30 V
(1) Tested according to IEC 62228-3:2019 CAN Transceivers.
(2) Results given here are specific to the SAE J2962-2 Communication Transceivers Qualification Requirements - CAN. Testing performed by OEM approved independent third party, EMC report available upon request.
(3) Tested according to IEC 62228-3:2019 CAN Transceivers.
(4) Tested according to SAE J2962-2.