ZHCSOP5B august   2021  – june 2023 AFE7900

PRODUCTION DATA  

  1.   1
  2. 1特性
  3. 2应用
  4. 3说明
  5. 4Revision History
  6. 5Specifications
    1. 5.1  Absolute Maximum Ratings
    2. 5.2  ESD Ratings
    3. 5.3  Recommended Operating Conditions
    4. 5.4  Thermal Information
    5. 5.5  Transmitter Electrical Characteristics
    6. 5.6  RF ADC Electrical Characteristics
    7. 5.7  PLL/VCO/Clock Electrical Characteristics
    8. 5.8  Digital Electrical Characteristics
    9. 5.9  Power Supply Electrical Characteristics
    10. 5.10 Timing Requirements
    11. 5.11 Switching Characteristics
    12. 5.12 Typical Characteristics
      1. 5.12.1  RX Typical Characteristics 30 MHz and 400 MHz
      2. 5.12.2  RX Typical Characteristics at 800MHz
      3. 5.12.3  RX Typical Characteristics 1.75GHz to 1.9GHz
      4. 5.12.4  RX Typical Characteristics 2.6GHz
      5. 5.12.5  RX Typical Characteristics 3.5GHz
      6. 5.12.6  RX Typical Characteristics 4.9GHz
      7. 5.12.7  TX Typical Characteristics at 30MHz and 400MHz
      8. 5.12.8  TX Typical Characteristics at 800MHz
      9. 5.12.9  TX Typical Characteristics at 1.8GHz
      10. 5.12.10 TX Typical Characteristics at 2.6GHz
      11. 5.12.11 TX Typical Characteristics at 3.5GHz
      12. 5.12.12 TX Typical Characteristics at 4.9GHz
      13. 5.12.13 TX Typical Characteristics at 7.1GHz
      14. 5.12.14 PLL and Clock Typical Characteristics
  7. 6Device and Documentation Support
    1. 6.1 接收文档更新通知
    2. 6.2 支持资源
    3. 6.3 商标
    4. 6.4 静电放电警告
    5. 6.5 术语表
  8. 7Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

5.8 Digital Electrical Characteristics

Typical values at TA = +25°C, full temperature range is TA,MIN = -40°C to TJ,MAX = +110°C (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
CML SerDes Inputs [8:1]SRX+/-
VSRDIFF SerDes Receiver Input Amplitude differential 100 1200 mVpp
VSRCOM SerDes Input Common Mode 400 mV
ZSRdiff SerDes Internal Differential Termination(1) 100 Ω
FSerDes SerDes Bit Rate Full rate mode 19 29.5 Gbps
Half rate mode 9.5 16.25 Gbps
Quarter rate mode 4.75 8.125 Gbps
Insertion Loss Tolerance(2) Serdes supply = 1.8V 25 dB
TJ Total Jitter Tolerance 0.42 UI
CML SerDes Outputs [8:1]STX+/-
VSTDIFF SerDes Transmitter Output Amplitude differential 500 1000 mVpp
VSTCOM SerDes Output Common Mode 0.4 0.45 0.55 V
ZSTdiff SerDes Output Impedance 100 Ω
TRF Output rise and fall time 20-80% 8 ps
TEQS Equalization range 7 dB
TTJ Output total jitter 0.21 UI
CMOS I/O: GPIO{B/C/D/E}x, SPICLK, SPISDIO, SPISDO, SPISEN, RESETZ, BISTB0, BISTB1
VIH High-Level Input Voltage 0.6×VDD1P8GPIO V
VIL Low-Level Input Voltage 0.4×VDD1P8GPIO V
IIH High-Level Input Current –250 250 µA
IIL Low-Level Input Current –250 250 µA
CL CMOS input capacitance 2 pF
VOH High-Level Input Voltage VDD1P8GPIO–0.2 V
VOL Low-Level Input Voltage 0.2 V
Differential Inputs: SYSREF+/- Mode A
FSYSREFMAX SYSREF Input Frequency Maximum 40 MHz
VSWINGSRMAX SYSREF Input Swing Maximum 1.8 Vppdiff(3)
VSWINGSRMIN SYSREF Input Swing Minimum fREF < 500MHz 0.3 Vppdiff(3)
VSWINGSRMIN SYSREF Input Swing Minimum fREF > 500MHz 0.6 Vppdiff(3)
VCOMSRMAX SYSREF Input Common Mode Voltage Maximum 0.8 V
VCOMSRMIN SYSREF Input Common Mode Voltage Minimum 0.6 V
ZT Input termination differential 100 (1) Ω
CL Input capacitance Each pin to GND 0.5 pF
LVDS Inputs: 0SYNCIN+/- and 1SYNCIN+/-
VICOM Input Common Voltage 1.2 V
VID Differential Input Voltage swing 450 Vppdiff(3)
ZT Input termination differential 100 Ω
LVDS Outputs: 0SYNCOUT+/- and 1SYNCOUT+/-
VOCOM Output Common Voltage 1.2 V
VOD Differential Output Voltage swing 500 Vppdiff(3)
ZT Internal Termination 100 Ω
(1) SYSREF termination is programmable between 100Ω, 150Ω and 300Ω
(2) Loss tolerance is bump to bump from STX to SRX
(3) Vppdiff is the difference between the maximum differential voltage (positive value) and minimum differential voltage (negative value).