主页 接口 USB IC USB-C 控制器
主页
接口
USB IC
USB-C 控制器

TPS25810-Q1

正在供货

具有负载检测功能的汽车类 USB Type-C™（版本 1.2）DFP 控制器和电源开关

立即订购
数据表

可提供此产品的更新版本

open-in-new 比较替代产品
功能与比较器件相同且具有相同引脚。
TPS25810A-Q1 正在供货 汽车类 USB Type-C™ DFP 控制器和电源开关 TPS25810A-Q1 is newer version and has fixed current limit regardless of CC advertisement

TPS25810-Q1

正在供货
数据表 立即订购

产品详情

Type CC controller Function Type-C Internal power path 5 V 3 A Power role Source Data role DFP Alternate mode No Dead battery support Yes Rating Automotive Operating temperature range (°C) -40 to 105
Type CC controller Function Type-C Internal power path 5 V 3 A Power role Source Data role DFP Alternate mode No Dead battery support Yes Rating Automotive Operating temperature range (°C) -40 to 105
WQFN (RVC) 20 12 mm² (4 mm × 3 mm)
  • USB Type-C Rev. 1.2 Compliant DFP Controller
  • Connector Attach or Detach Detection
  • STD, 1.5-A, or 3-A Capability Advertisement on CC
  • Super-Speed Polarity Determination
  • VBUS Application and Discharge
  • VCONN Application to Electronically Marked Cable
  • Audio and Debug Accessory Identification
  • 0.7-µA (typ) IDDQ When Port Is Unattached
  • Three Input Supply Options
    • IN1: USB Charging Supply
    • IN2: VCONN Supply
    • AUX: Device Power Supply
  • Power Wake Supports Low Power in System Hibernate (S4) and OFF (S5) Power States
  • 34-mΩ (typ) High-Side MOSFET
  • Programmable 1.7-A or 3.4-A ILIM (±7.1%)
  • Port Power Management Enables Power Resource Optimization Across Multiple Ports
  • Package: 20-Pin WQFN (3 7times; 4) CC pins are IEC-61000-4-2 rated
  • USB Type-C Rev. 1.2 Compliant DFP Controller
  • Connector Attach or Detach Detection
  • STD, 1.5-A, or 3-A Capability Advertisement on CC
  • Super-Speed Polarity Determination
  • VBUS Application and Discharge
  • VCONN Application to Electronically Marked Cable
  • Audio and Debug Accessory Identification
  • 0.7-µA (typ) IDDQ When Port Is Unattached
  • Three Input Supply Options
    • IN1: USB Charging Supply
    • IN2: VCONN Supply
    • AUX: Device Power Supply
  • Power Wake Supports Low Power in System Hibernate (S4) and OFF (S5) Power States
  • 34-mΩ (typ) High-Side MOSFET
  • Programmable 1.7-A or 3.4-A ILIM (±7.1%)
  • Port Power Management Enables Power Resource Optimization Across Multiple Ports
  • Package: 20-Pin WQFN (3 7times; 4) CC pins are IEC-61000-4-2 rated

The TPS25810-Q1 device is a USB Type-C downstream-facing port (DFP) controller with an integrated 3-A rated USB power switch. The TPS25810-Q1 device monitors the Type-C configuration channel (CC) lines to determine when a USB device is attached. If an upstream-facing port (UFP) device is attached, the TPS25810-Q1 device applies power to VBUS and communicates the selectable VBUS current-sourcing capability to the UFP via the pass-through CC line. If the UFP is attached using an electronically marked cable, the TPS25810‑Q1 device also applies VCONN power to the cable CC pin. The TPS25810-Q1 device also identifies when Type-C audio or debug accessories are attached.

The TPS25810-Q1 device draws less than 0.7 µA (typ) when no device is attached. Additional system power saving is achievable in the S4 and S5 system power states by using the UFP output to disable the high-power 5-V supply when no UFP is attached. In this mode, the device is capable of running from an auxiliary supply (AUX), which can be a lower-voltage supply (3.3 V), typically powering the system µC in low-power states (S4 and S5).

The TPS25810-Q1 34-mΩ power switch has two selectable fixed-current limits that align with the Type‑C current levels. The FAULT output signals when the switch is in an overcurrent or overtemperature condition. The LD_DET output controls power management to multiple high-current Type-C ports in an environment where all ports cannot simultaneously provide high current (3 A).

The TPS25810-Q1 device is a USB Type-C downstream-facing port (DFP) controller with an integrated 3-A rated USB power switch. The TPS25810-Q1 device monitors the Type-C configuration channel (CC) lines to determine when a USB device is attached. If an upstream-facing port (UFP) device is attached, the TPS25810-Q1 device applies power to VBUS and communicates the selectable VBUS current-sourcing capability to the UFP via the pass-through CC line. If the UFP is attached using an electronically marked cable, the TPS25810‑Q1 device also applies VCONN power to the cable CC pin. The TPS25810-Q1 device also identifies when Type-C audio or debug accessories are attached.

The TPS25810-Q1 device draws less than 0.7 µA (typ) when no device is attached. Additional system power saving is achievable in the S4 and S5 system power states by using the UFP output to disable the high-power 5-V supply when no UFP is attached. In this mode, the device is capable of running from an auxiliary supply (AUX), which can be a lower-voltage supply (3.3 V), typically powering the system µC in low-power states (S4 and S5).

The TPS25810-Q1 34-mΩ power switch has two selectable fixed-current limits that align with the Type‑C current levels. The FAULT output signals when the switch is in an overcurrent or overtemperature condition. The LD_DET output controls power management to multiple high-current Type-C ports in an environment where all ports cannot simultaneously provide high current (3 A).
filter 查找其他 USB-C 控制器
下载 观看带字幕的视频 视频

技术文档

未找到结果。请清除搜索并重试。
查看全部 1
顶层文档 类型 标题 格式选项 下载最新的英语版本 日期
* 数据表 TPS25810-Q1 具有负载检测功能的 USB Type-C DFP 控制器和电源开关 数据表 PDF | HTML 英语版 PDF | HTML 2016-11-29

设计与开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

评估板

TPS25810EVM-745 — 具有负载检测功能的 TPS25810 USB Type-C DFP 控制器和电源开关评估模块

德州仪器 (TI) TPS25810EVM-745 评估模块 (EVM) 可帮助设计人员评估 TPS25810 USB Type-C DFP 控制器和电源开关的性能。该 EVM 包含器件的输入和输出以及许多测试点和跳线，可轻松配置和评估 TPS25810 特性。

用户指南: PDF
支持的产品和硬件
有库存
限制：
??asset.out-of-stock-ti_zh_CN??
无货
参考设计

PMP40285 — 汽车类双端口 USB Type-C™ DFP 5V 3A 充电器参考设计

PMP40285 是一种双端口 USB Type-C™ 充电器参考设计。此设计采用汽车输入电压，并输出到两个 USB Type-C 端口。每个端口都为 USB Type-C™ 器件提供 5V 3A 电流。该设计完全兼容 USB Type C，并向后兼容 BC1.2 和 DCP 配置。此设计通过单芯片解决方案实现双 USB Type-C DFP 输出并采用较少元件，因此具有成本效益。
支持的产品和硬件
参考设计

PMP40286 — 汽车类 USB Type-C™ DFP 5V 3A + USB Type-A 5V 2.4A 充电器参考设计

PMP40286 是一种双端口车载充电器参考设计。  该参考设计输出到 5V 3A USB Type-C™ 端口和 5V 2.4A USB Type-A 端口。USB Type-C 端口可向后兼容 BC1.2 和 DCP 配置。Type-A 端口能够在使用长电缆将智能手机或平板电脑连接到 USB 充电器时补偿对电压降的影响。在 12V 输入下采用 USB 开关后，解决方案效率高于 91%。
支持的产品和硬件
参考设计

TIDA-00987 — 具有 USB 3.0 数据支持的 CISPR 25 5 类 USB Type-C™ 端口参考设计

TIDA-00987 是需要数据传输的汽车媒体端口参考设计。此项设计能够通过 15W USB Type-C™ 端口支持 USB 2.0 和 USB 3.0。客户可通过采用符合 AEC-Q100 模拟类认证且通过 CISPR 25 5 级测试的集成电路 (IC) 构建的完整参考设计，加速媒体端口系统的开发。此设计创建了一个稳健、灵活的解决方案，让系统能够在一个小型 1 英寸 x 2.5 英寸解决方案中为 USB Type-C 和传统器件充电。
支持的产品和硬件
封装 引脚 CAD 符号、封装和 3D 模型
WQFN (RVC) 20 Ultra Librarian
适用于评估类项目的 TI 标准条款与条件。

订购和质量

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

可获得 TI 工程师技术支持的 TI E2E™ 论坛

查看全部论坛主题 查看英文版全部论坛主题

所有内容均由 TI 和社区贡献者按“原样”提供，并不构成 TI 规范。请参阅使用条款。

如果您对质量、包装或订购 TI 产品有疑问，请参阅 TI 支持。​​​​​​​​​​​​​​

视频