OPA569
- HIGH OUTPUT CURRENT: 2A
- OUTPUT SWINGS TO: 150mV of Rails with IO =2A
- THERMAL PROTECTION
- ADJUSTABLE CURRENT LIMIT
- TWO FLAGS: Current Limit and Temperature Warning
- LOW SUPPLY VOLTAGE OPERATION: 2.7V to 5.5V
- SHUTDOWN FUNCTION WITH OUTPUT DISABLE
- SMALL POWER PACKAGE: SO-20 PowerPAD™
- APPLICATIONS
- THERMOELECTRIC COOLER DRIVER
- LASER DIODE PUMP DRIVER
- VALVE, ACTUATOR DRIVER
- SYNCHRO, SERVO DRIVER
- TRANSDUCER EXCITATION
- GENERAL LINEAR POWER BOOSTER FOR OP AMPS
- PARALLELING OPTION FOR HIGHER CURRENT APPLICATIONS
PowerPAD is a trademark of Texas Instruments.
The OPA569 is a low-cost, high-current, operational amplifier designed for driving a wide variety of loads while operating on low-voltage supplies. It operates from either single or dual supplies for design flexibility and has rail-to-rail swing on the input and output. Typical output swing is within 150mV of the supply rails, with output current of 2A. Output swing closer to the rails is achievable with lighter loads.
The OPA569 is unity gain stable, has low dc errors, is easy to use, and free from the phase inversion problems found in some power amplifiers. High performance is maintained at voltage swings near the output rails.
The OPA569 provides an accurate user-selected current limit that is set with an external resistor, or digitally adjusted via a Digital-to-Analog Converter.
The OPA569 output can be independently disabled using the Enable pin, saving power and protecting the load.
The IMONITOR pin provides a 1:475 bidirectional copy of the output current. This eliminates the need for a series current shunt resistor, allowing more voltage to be applied to the load. This pin can be used for simple monitoring, or feedback control to establish constant output current.
Two flags are provided: one for warning of thermal over-stress, and one for current limit condition. The Thermal Flag pin can be connected to the Enable pin to provide a thermal shutdown solution.
Packaged in the Texas Instruments PowerPAD™ package, it is small and easy to heat sink. The OPA569 is specified for operation over the extended industrial temperature range, –40°C to +85°C.
技术文档
| 顶层文档 | 类型 | 标题 | 格式选项 | 下载最新的英语版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 数据表 | OPA569: Rail-To-Rail I/O, 2A Power Amplifier 数据表 (Rev. A) | 2003-10-22 | |||
| 电子书 | An Engineer’s Guide to Designing with Precision Amplifiers | 2021-4-29 | ||||
| 电子书 | The Signal e-book: 有关运算放大器设计主题的博客文章汇编 | PDF | HTML | 英语版 | PDF | HTML | 2018-1-31 | |
| 应用手册 | Power Amplifier Stress and Power Handling Limitations | 2000-9-27 |
设计与开发
如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
模拟工程师计算器旨在加快模拟电路设计工程师经常运用的许多重复性计算。该基于 PC 的工具提供图形界面，其中显示各种常见计算列表，从使用反馈电阻器设置运算放大器增益到选择合适的电路设计元件，以稳定模数转换器 (ADC) 驱动器缓冲器电路。
除了可用作独立工具之外，该计算器还能很好地与模拟工程师口袋参考中所述的概念配合使用。
TIDA-00155 — 适用于液体和固体光学分析的 DLP 近红外光谱仪参考设计
近红外 (NIR) 光谱仪参考设计具有便携式外形规格，将德州仪器 (TI) 的 DLP 技术与单元件 InGaAs 检测器相结合以提供高性能测量，与使用昂贵 InGaAs 阵列检测器的架构或易损旋转光栅架构相比，价格更实惠。 NIR 光谱仪通常用于分析有机基液体和固体，适用于食品、农业、制药、石化和塑料等应用。 结合功能强大的 Sitara™ 嵌入式处理器和模拟信号链组件，开发人员现在能够将高端实验室光谱仪的强大功能带到现场和生产线。
TIPD103 — 桥接负载 V-I 转换器，0.5 至 4.5 V 输入，+/- 2A 输出，5% 误差
此验证设计电路是一种双向电流源，可用于驱动浮动负载，尤其是单端源的热电冷却器 (TEC)。此电路利用内部输出电流监视器电路 (IMON)，该电路是 OPA569 功率放大器的特色之一。V-I 转换功能通过使用 IMON 电流作为第一个放大器的反馈而实现。这可以使用户生成可取消 IMON 电流的输入信号，从而得到经过良好调节的输出电流。第二个放大器反转第一个放大器的输出以实现桥接式负载 (BTL) 操作，在负载范围内使电压摆幅和转换率加倍，在单端电源上实现双向操作和良好的电压摆幅。OPA569 的出色输出摆幅至轨可以利用 5 V 单端电源在 2 A 输出电流下实现 4.5 V 的可用输出电压。
| 封装 | 引脚 | CAD 符号、封装和 3D 模型 |
|---|---|---|
| HSOIC (DWP) | 20 | Ultra Librarian |