主页 放大器 仪表放大器
主页
放大器
仪表放大器

INA330

正在供货

用于温度控制的热敏电阻信号放大器

立即订购
数据表

INA330

正在供货
数据表 立即订购

产品详情

Number of channels 1 Vs (max) (V) 5.5 Vs (min) (V) 2.7 Voltage gain (min) (V/V) 1 Voltage gain (max) (V/V) 1 Features Shutdown Iq (typ) (mA) 2.6 Bandwidth at min gain (typ) (MHz) 0.001 Gain error (±) (max) (%) 0.2 Operating temperature range (°C) -40 to 85 Rating Catalog Type Resistor Output swing headroom (to negative supply) (typ) (V) 0.005 Output swing headroom (to positive supply) (typ) (V) -0.005 Input common mode headroom (to negative supply) (typ) (V) 0.1 Input common mode headroom (to positive supply) (typ) (V) -0.1
Number of channels 1 Vs (max) (V) 5.5 Vs (min) (V) 2.7 Voltage gain (min) (V/V) 1 Voltage gain (max) (V/V) 1 Features Shutdown Iq (typ) (mA) 2.6 Bandwidth at min gain (typ) (MHz) 0.001 Gain error (±) (max) (%) 0.2 Operating temperature range (°C) -40 to 85 Rating Catalog Type Resistor Output swing headroom (to negative supply) (typ) (V) 0.005 Output swing headroom (to positive supply) (typ) (V) -0.005 Input common mode headroom (to negative supply) (typ) (V) 0.1 Input common mode headroom (to positive supply) (typ) (V) -0.1
VSSOP (DGS) 10 14.7 mm² (3 mm × 4.9 mm)
  • OPTIMIZED FOR PRECISION 10k THERMISTOR APPLICATIONS
    • LOW OFFSET OVER TEMPERATURE:
         0.009°C Temperature Error, –40°C to +85°C
    • EXCELLENT LONG-TERM STABILITY
    • VERY LOW 1/f NOISE: (0.01Hz to 10Hz)
         (Peak-to-Peak Equivalent to 0.0001°C)
  • WIDE OUTPUT SWING: Within 10mV of Rails
  • SUPPLY RANGE: Single +2.7V to +5.5V
  • microPACKAGE: MSOP-10
  • REQUIRES ONLY ONE PRECISION RESISTOR
  • APPLICATIONS
    • THERMISTOR-BASED TEMPERATURE CONTROLLERS FOR OPTICAL NETWORKING
    • HIGH ACCURACY FOR TEC APPLICATIONS
    • LASER TEMPERATURE CONTROL
  • OPTIMIZED FOR PRECISION 10k THERMISTOR APPLICATIONS
    • LOW OFFSET OVER TEMPERATURE:
         0.009°C Temperature Error, –40°C to +85°C
    • EXCELLENT LONG-TERM STABILITY
    • VERY LOW 1/f NOISE: (0.01Hz to 10Hz)
         (Peak-to-Peak Equivalent to 0.0001°C)
  • WIDE OUTPUT SWING: Within 10mV of Rails
  • SUPPLY RANGE: Single +2.7V to +5.5V
  • microPACKAGE: MSOP-10
  • REQUIRES ONLY ONE PRECISION RESISTOR
  • APPLICATIONS
    • THERMISTOR-BASED TEMPERATURE CONTROLLERS FOR OPTICAL NETWORKING
    • HIGH ACCURACY FOR TEC APPLICATIONS
    • LASER TEMPERATURE CONTROL

The INA330 is a precision amplifier designed for thermoelectric cooler (TEC) control in optical networking applications. It is optimized for use in 10k thermistor-based temperature controllers. The INA330 provides thermistor excitation and generates an output voltage proportional to the difference in resistances applied to the inputs. It uses only one precision resistor plus the thermistor, thus providing an alternative to the traditional bridge circuit. This new topology eliminates the need for two precision resistors while maintaining excellent accuracy for temperature control applications.

An excitation voltage is applied to the thermistor (RTHERM) and precision resistor (RSET), creating currents I1 and I2. The current conveyor circuit produces an output current, I0, equal to I1 – I2, which flows through the external gain-setting resistor. A buffered voltage output proportional to I0 is also provided.

The INA330 offers excellent long-term stability, and very low 1/f noise throughout the life of the product. The low offset results in a 0.009°C temperature error from –40°C to +85°C. It comes in MSOP-10 packaging and operates with supply voltages from +2.7V to +5.5V. It is specified over the industrial temperature range, –40°C to +85°C, with operation from –40°C to +125°C.

The INA330 is a precision amplifier designed for thermoelectric cooler (TEC) control in optical networking applications. It is optimized for use in 10k thermistor-based temperature controllers. The INA330 provides thermistor excitation and generates an output voltage proportional to the difference in resistances applied to the inputs. It uses only one precision resistor plus the thermistor, thus providing an alternative to the traditional bridge circuit. This new topology eliminates the need for two precision resistors while maintaining excellent accuracy for temperature control applications.

An excitation voltage is applied to the thermistor (RTHERM) and precision resistor (RSET), creating currents I1 and I2. The current conveyor circuit produces an output current, I0, equal to I1 – I2, which flows through the external gain-setting resistor. A buffered voltage output proportional to I0 is also provided.

The INA330 offers excellent long-term stability, and very low 1/f noise throughout the life of the product. The low offset results in a 0.009°C temperature error from –40°C to +85°C. It comes in MSOP-10 packaging and operates with supply voltages from +2.7V to +5.5V. It is specified over the industrial temperature range, –40°C to +85°C, with operation from –40°C to +125°C.
filter 查找其他 仪表放大器
下载 观看带字幕的视频 视频

技术文档

未找到结果。请清除搜索并重试。
查看全部 3
顶层文档 类型 标题 格式选项 下载最新的英语版本 日期
* 数据表 INA330: Thermistor Signal Amplifier for Temperature Control 数据表 2002-11-6
应用手册 输入偏置电流回路在仪表放大器应用中的重要性 PDF | HTML 英语版 PDF | HTML 2022-4-22
电子书 The Signal e-book: 有关运算放大器设计主题的博客文章汇编 PDF | HTML 英语版 PDF | HTML 2018-1-31

设计与开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

评估板

DLPNIRSCANEVM — DLP® NIRscan™ 评估模块

 

DLP NIRscan 是一套用于设计经济实惠型高性能近红外线光谱仪的完整评估模块 (EVM)。  此套灵活的工具拥有设计人员所需要的一切资源，购买后可直接用于开始开发基于 DLP 的光谱仪。  此 EVM 采用 DLP 0.45 WXGA NIR 芯片组，这是专为用于近红外线 (NIR) 而优化的首款 DLP 芯片组。  借助 DLP 技术，应用于食品、药品、油气和其他新兴产业的光谱仪将能够在工厂和现场提供实验室级别的性能。了解有关光谱分析的更多信息。

电源单独销售。

交流/直流台式机适配器 12V 60W

 

 

用户指南: PDF
支持的产品和硬件
有库存
限制：
??asset.out-of-stock-ti_zh_CN??
无货
计算工具

ANALOG-ENGINEER-CALC — PC software analog engineer's calculator

模拟工程师计算器旨在加快模拟电路设计工程师经常运用的许多重复性计算。该基于 PC 的工具提供图形界面，其中显示各种常见计算列表，从使用反馈电阻器设置运算放大器增益到选择合适的电路设计元件，以稳定模数转换器 (ADC) 驱动器缓冲器电路。

除了可用作独立工具之外，该计算器还能很好地与模拟工程师口袋参考中所述的概念配合使用。

支持的产品和硬件
参考设计

TIDA-00155 — 适用于液体和固体光学分析的 DLP 近红外光谱仪参考设计

近红外 (NIR) 光谱仪参考设计具有便携式外形规格，将德州仪器 (TI) 的 DLP 技术与单元件 InGaAs 检测器相结合以提供高性能测量，与使用昂贵 InGaAs 阵列检测器的架构或易损旋转光栅架构相比，价格更实惠。  NIR 光谱仪通常用于分析有机基液体和固体，适用于食品、农业、制药、石化和塑料等应用。  结合功能强大的 Sitara™ 嵌入式处理器和模拟信号链组件，开发人员现在能够将高端实验室光谱仪的强大功能带到现场和生产线。

支持的产品和硬件
封装 引脚 CAD 符号、封装和 3D 模型
VSSOP (DGS) 10 Ultra Librarian
适用于评估类项目的 TI 标准条款与条件。

订购和质量

支持和培训

可获得 TI 工程师技术支持的 TI E2E™ 论坛

查看全部论坛主题 查看英文版全部论坛主题

所有内容均由 TI 和社区贡献者按“原样”提供，并不构成 TI 规范。请参阅使用条款。

如果您对质量、包装或订购 TI 产品有疑问，请参阅 TI 支持。​​​​​​​​​​​​​​

视频