홈 DLP 제품 DLP 컨트롤러 및 드라이버
홈
DLP 제품
DLP 컨트롤러 및 드라이버

DLPC300

활성

DLP3000 DMD(디지털 마이크로미러 디바이스)용 DLP® 컨트롤러

지금 주문하기
데이터 시트
정오표

DLPC300

활성
데이터 시트 지금 주문하기

제품 상세 정보

Component type Controller Chipset family DLP3000 Display resolution (max) WVGA (854x480) Operating temperature range (°C) -20 to 85 Rating Catalog
Component type Controller Chipset family DLP3000 Display resolution (max) WVGA (854x480) Operating temperature range (°C) -20 to 85 Rating Catalog
NFBGA (ZVB) 176 49 mm² 7 x 7
  • Required for Reliable Operation of the DLP3000
    DMD
  • Multi-Mode, 24-Bit Input Port:
    • Supports Parallel RGB With Pixel Clock Up to
      33.5 MHz and 3 Input Color Bit-Depth Options:
      • 24-Bit RGB888 or 4:4:4 YCrCb888
      • 18-Bit RGB666 or 4:4:4 YCrCb666
      • 16-Bit RGB565 or 4:2:2 YCrCb565
    • Supports 8-Bit BT.656 Bus Mode With Pixel
      Clock Up to 33.5 MHz
  • Supports Input Resolutions 608 × 684, 864 × 480,
    854 × 480 (WVGA), 640 × 480 (VGA), 320 × 240
    (QVGA)
  • Pattern Input Mode
    • One-to-One Mapping of Input Data to
      Micromirrors
    • 1-Bit Binary Pattern Rates up to 4000-Hz
    • 8-Bit Grayscale Pattern Rates up to 120-Hz
  • Video Input Mode with Pixel Data Processing
    • Supports 1- to 60-Hz Frame Rates
    • Programmable Degamma
    • Spatial-Temporal Multiplexing (Dithering)
    • Automatic Gain Control
    • Color Space Conversion
  • Output Trigger Signal for Synchronizing With
    Camera, Sensor, or Other Peripherals
  • System Control:
    • I2C Control of Device Configuration
    • Programmable Current Control of up to 3 LEDs
    • Integrated DMD Reset Driver Control
    • DMD Horizontal and Vertical Display Image
      Flip
  • Low-Power Consumption: Less than 93 mW
    (Typical)
  • External Memory Support:
    • 166-MHz Mobile DDR SDRAM
    • 33.3-MHz Serial FLASH
  • 176-Pin, 7 × 7 mm With 0.4-mm Pitch NFBGA
    Package
  • Required for Reliable Operation of the DLP3000
    DMD
  • Multi-Mode, 24-Bit Input Port:
    • Supports Parallel RGB With Pixel Clock Up to
      33.5 MHz and 3 Input Color Bit-Depth Options:
      • 24-Bit RGB888 or 4:4:4 YCrCb888
      • 18-Bit RGB666 or 4:4:4 YCrCb666
      • 16-Bit RGB565 or 4:2:2 YCrCb565
    • Supports 8-Bit BT.656 Bus Mode With Pixel
      Clock Up to 33.5 MHz
  • Supports Input Resolutions 608 × 684, 864 × 480,
    854 × 480 (WVGA), 640 × 480 (VGA), 320 × 240
    (QVGA)
  • Pattern Input Mode
    • One-to-One Mapping of Input Data to
      Micromirrors
    • 1-Bit Binary Pattern Rates up to 4000-Hz
    • 8-Bit Grayscale Pattern Rates up to 120-Hz
  • Video Input Mode with Pixel Data Processing
    • Supports 1- to 60-Hz Frame Rates
    • Programmable Degamma
    • Spatial-Temporal Multiplexing (Dithering)
    • Automatic Gain Control
    • Color Space Conversion
  • Output Trigger Signal for Synchronizing With
    Camera, Sensor, or Other Peripherals
  • System Control:
    • I2C Control of Device Configuration
    • Programmable Current Control of up to 3 LEDs
    • Integrated DMD Reset Driver Control
    • DMD Horizontal and Vertical Display Image
      Flip
  • Low-Power Consumption: Less than 93 mW
    (Typical)
  • External Memory Support:
    • 166-MHz Mobile DDR SDRAM
    • 33.3-MHz Serial FLASH
  • 176-Pin, 7 × 7 mm With 0.4-mm Pitch NFBGA
    Package

The DLPC300 controller provides a convenient, multi-functional interface between user electronics and the DMD, enabling high-speed pattern rates (up to 4-kHz binary), providing LED control, and data formatting for multiple input resolutions. The DLPC300 digital controller, part of the DLP3000 chipset, is required for reliable operation of the DLP3000 DMD. The DLPC300 also outputs a trigger signal for synchronizing displayed patterns with a camera, sensor, or other peripherals.

The DLPC300 controller provides a convenient, multi-functional interface between user electronics and the DMD, enabling high-speed pattern rates (up to 4-kHz binary), providing LED control, and data formatting for multiple input resolutions. The DLPC300 digital controller, part of the DLP3000 chipset, is required for reliable operation of the DLP3000 DMD. The DLPC300 also outputs a trigger signal for synchronizing displayed patterns with a camera, sensor, or other peripherals.
filter 기타 DLP 컨트롤러 및 드라이버 찾기
다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
10개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet DLPC300 DLP® Digital Controller for the DLP3000 DMD datasheet (Rev. C) PDF | HTML 2015/08/01
* Errata DLP® LightCrafter™ NAND Failures Resolution 2013/12/23
* Errata DLP® LightCrafter™ USB Connectivity Solutions (Rev. A) 2012/08/16
Design guide Portable Point Cloud Generation 3D Scanning Using DLP Technology User's Guide (Rev. A) 2016/05/13
EVM User's guide DLP Software Development Kit (SDK) User's Guide 2016/04/28
Application note Creating Multiple Bit Depth and Multiple Color Pattern Sequences for the DLP® Li (Rev. A) 2013/10/29
Application note DLP® LightCrafter™ FPGA Overview 2013/08/27
Application note DLP 0.3 WVGA Chipset Data Sheet (Rev. A) 2013/07/31
User guide DLPC300 Programmer's Guide (Rev. B) 2013/07/24
White paper Using the DLP LightCrafter to Trigger CCD Cameras from the Imaging Source 2012/03/14

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

펌웨어

DLPR300 — DLPC300 구성 및 지원 펌웨어

The DLP 0.3 WVGA chipset consists of the DLP3000 DMD and DLPC300 controller. To enable broad functionality of the chipset and ensure reliable operation of the DLP3000 micromirrors, TI is offering DLPR300 configuration and support firmware. Combined with the DLPC300 controller, the DLPR300 (...)
사용 설명서: PDF
View Options
시뮬레이션 모델

DLPC300 BSDL

DLPM005.ZIP (4 KB) - BSDL Model
다운로드
시뮬레이션 모델

DLPC300 IBIS Files

DLPC071.IBS (533 KB) - IBIS Model
다운로드
계산 툴

DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency

This calculator will be used to help customers understand how to model DMD diffraction patterns and efficiency with their specific DMD input parameters and is modeled to the customer’s specific design. Optical modules can also be used with the calculator.
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어
다운로드
설계 툴

DLP-OMM-SEARCH — DLP® 제품 광학 모듈 검색 툴

To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)
View Options
설계 툴

DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES

The DLP optical design guidelines presentation provides a comprehensive overview of the guidelines specific to designing an optical system with DLP Products and will help enable customers in their design process.
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어
다운로드
레퍼런스 디자인

TIDA-00361 — DLP® 기술을 사용한 3D 스캔을 위한 휴대용 포인트 클라우드 생성 레퍼런스 디자인

The portable 3D scanning reference design employs the Texas Instruments DLP® Advanced Light Control Software Development Kit (SDK) for LightCrafter™ series controllers, which allows developers to easily construct 3D point clouds by integrating TI’s digital micromirror device (DMD) technology (...)
Design guide: PDF
회로도: PDF
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
NFBGA (ZVB) 176 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상