DLP3021-Q1
- Qualified for automotive applications:
- –40°C to 105°C operating DMD array temperature range
- 0.3-inch diagonal micromirror array
- 7.6-µm micromirror pitch
- ±12° micromirror tilt angle (relative to flat state)
- Side illumination for reduced system size
- WVGA (864 × 480) input resolution
- Polarization independent spatial light modulator
- Compatible with LED or laser light sources
- Low-power consumption: 255 mW (maximum)
- Operating temperature range: –40°C to 105°C
- Hermetic package
- JTAG boundary scan to allow in-system validation
- Compatible with the DLPC120-Q1 automotive DMD controller
- 80-MHz DDR DMD interface
The DLP3021-Q1 Automotive DMD is primarily targeted for automotive exterior light control and display applications, such as ground projection with the ability to display dynamic content. Ground projections can help facilitate vehicle to pedestrian (V2P) communication, such as back up and door open warnings, in addition to orchestrating vehicle communication systems and vehicle personalization options. Due to their small form factor and low power operation, projectors with the DLP3021-Q1 chipset can support many projection applications. They can be placed in many locations in the car including inside the side mirror, door panel, tail light, front grill, and more. This chipset can be coupled with LEDs or lasers to create highly saturated colors with over 125% NTSC color gamut, and can be used with either RGB or white illumination sources. A DLP Products FPGA configuration can be used to drive the DLP3021-Q1 Automotive DMD to reduce form factor for easy integration in a vehicle. The DLPC120-Q1 Automotive DMD controller can also be used to drive the DLP3021-Q1 Automotive DMD with support for 24-bit RGB video input to increase content flexibility.
추가 정보 요청
지속적으로 개발하려면 광학 모듈이 필요합니다. 광학 모듈 검색 툴을 보고 사용하고 계신 DMD에 호환되는 광학 모듈을 선택하세요. 자세한 정보 보기
관심 가지실만한 유사 제품
비교 대상 장치와 유사한 기능.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 데이터 시트 | DLP3021-Q1 0.3-Inch WVGA Automotive DMD datasheet (Rev. C) | PDF | HTML | 2023. 3. 22 | |
| 사용 설명서 | DMD Diffraction Efficiency Calculator (Rev. B) | PDF | HTML | 2026. 1. 9 | ||
| 사용 설명서 | DLP2021-Q1 and DLP3021-Q1 FPGA User's Guide (Rev. B) | PDF | HTML | 2024. 6. 10 | ||
| Product overview | TI DLP® Pico™ Technology for Dynamic Ground Projection | PDF | HTML | 2023. 12. 4 | ||
| 백서 | Integrating Dynamic Ground Projection Into a Vehicle | PDF | HTML | 2022. 6. 9 | ||
| 기술 문서 | Getting started with evaluation modules and software tools for dynamic ground proj | PDF | HTML | 2021. 11. 3 | ||
| 애플리케이션 노트 | Dynamic Ground Projection Application Requirements | PDF | HTML | 2020. 10. 7 | ||
| 애플리케이션 노트 | DLP3021-Q1 Dynamic Ground Projection System Design | PDF | HTML | 2020. 9. 22 | ||
| 기술 문서 | Automotive exterior lighting gets a major upgrade | PDF | HTML | 2020. 7. 14 | ||
| 백서 | Dynamic Ground Projection using DLP® Technology for Automotive Exterior Lighting | 2020. 4. 27 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DLP3021LEQ1EVM — DLP3021-Q1 동적 접지 프로젝터 평가 모듈
DLP® 제품 DLP3021LEQ1EVM 평가 모듈(EVM)은 DLP3021-Q1 칩셋을 제어하고 인터페이스하도록 설계된 완전한 전자 및 광학 서브시스템입니다. DLP3021-Q1은 FPGA 기반 DMD(디지털 마이크로미러 디바이스) 컨트롤러와 상호 작용합니다. 이 칩셋은 조명 및 프로젝션 광학 부품과 RGB LED가 결합되어 있어 소형 폼 팩터에서 풀 모션 비디오 재생과 함께 최대 30루멘의 밝기를 제공하는 프로젝터를 생성합니다. DLP3021LEQ1EVM은 생산 설계가 아니며 평가 전용입니다.
LOSTEAKA-3P-DLP3021-FLASH — Losteaka DGP-M-L01A 차량용 소형 프로젝터 플래시 타입
DGP-M-L01A 프로젝터는 TI의 DLP3021-Q1 DMD를 기반으로 하며 864x480 해상도를 지원합니다. 작은 크기와 풀 RGB LED 지원을 갖춘 이 제품은 80~100lm 출력의 차량용 DGP(디지털 접지 프로젝션) 및 실내 조명 프로젝션 애플리케이션에 적합합니다. 하드웨어 평가 모듈은 온보드 플래시 메모리를 통한 프로그래밍 및 콘텐츠 재생을 지원합니다.
LOSTEAKA-3P-DLP3021-HDMI — Losteaka DGP-H-L01A 차량용 소형 프로젝터 HDMI 타입
DGP-H-L01A 프로젝터는 TI의 DLP3021-Q1 DMD를 기반으로 하며 864x480 해상도를 지원합니다. 작은 크기와 풀 RGB LED 지원을 갖춘 이 제품은 80~100lm 출력의 차량용 DGP(디지털 접지 프로젝션) 및 실내 조명 프로젝션 애플리케이션에 적합합니다. 하드웨어 평가 모듈은 콘텐츠 디스플레이 및 프로젝션을 위한 직접 HDMI 연결을 지원합니다.
DLPC135 — DLP3021-Q1 Composer Project 및 FPGA 구성 2.0
DLPC136 — DLP Control Program for Dynamic Ground Projection
DLPC137 — DLP Composer for DGP
DLPC138 — MSP430 Example Code 1.3
DLPR058 — 패키지 FQR(시리즈 247) 3D-CAD 지오메트리를 지원하는 DLP3020-Q1/DLP3021-Q1 DMD
DLP-DGP-BRIGHTNESS-CALC — Dynamic Ground Projection
이 Excel 계산기는 DLP3021-Q1 DMD(디지털 마이크로미러 디바이스)를 사용하여 동적 접지 프로젝션 애니메이션, 로고 또는 심벌의 밝기를 추정하기 위한 시작점을 제공합니다. 이 계산기는 도로 조명, 도로 표면 유형 및 이미지 크기와 같은 일반적인 주변 조건을 사용합니다. 계산기는 이 값을 사용하여 차량 주변에 형성된 결과 이미지의 예상 밝기를 계산합니다.
DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency
DLP-OMM-SEARCH — DLP® 제품 광학 모듈 검색 툴
To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)
DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES
DLPC127 — Series 247 DMD Mounting and Electrical Interconnect Information
DLPC150 — DLP3021LEQ1EVM Optical Design and Overview
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DLP-S247 (FQR) | 54 | Ultra Librarian |
주문 및 품질
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.