DLP3940S-Q1
- Qualified for automotive applications –
- –40°C to 105°C operating DMD array temperature range
- Functional Safety Quality-Managed
- Documentation available to aid ISO 26262 functional safety system design up to ASIL-B
- The DLP3940S-Q1 automotive chipset includes:
- DLP3940S-Q1 DMD
- DLPC231S-Q1 DMD controller
- TPS99002S-Q1 system management and illumination controller
- 0.39-inch diagonal micromirror array
- 1080p FHD (1920 × 1080) display resolution at 120Hz
- 4.5µm micromirror pitch
- ±14.5° micromirror tilt (relative to flat surface)
- Side illumination
- Compatible with LED or laser illumination
- Up to 600MHz SubLVDS DMD interface for low power and emission
- 10kHz DMD refresh rate over temperature extremes
- Built-in self-test (BIST) of DMD memory cells
The DLP3940S-Q1 digital micromirror device (DMD) is a digitally controlled micro-electro-mechanical system (MEMS) spatial light modulator (SLM) that enables bright 1080p FHD to achieve high-performance, high-resolution augmented reality head-up display (HUD). The 16:9 aspect ratio supports very wide aspect ratio designs, and the high resolution enables retinal limited displays to be achieved in HUD applications. The DLP3940S-Q1 offers a balance of optical throughput and resolution, enabling a wide field of view and a large driver eye box for enhanced user experience. This chipset, coupled with LEDs or lasers and an optical system, enables deep, saturated colors of 125% NTSC, high brightness of more than 15,000cd/m2, high dynamic dimming ratio of more than 5000:1, and high solar load tolerance. The DLP3940S-Q1 automotive DMD micromirror array is configured for side illumination, which enables highly efficient and more compact optical engine designs. The DLP3940S-Q1 device is available in a panel package for optimized system cost. The package has low thermal resistance to the DMD array to enable efficient thermal solutions.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | DLP3940S-Q1 0.39-Inch 1080p FHD Digital Micromirror Device for Automotive Display Applications datasheet | PDF | HTML | 2025/12/12 |
| Product overview | DLP3940S-Q1: Bringing Full-HD Resolution to Automotive Projection Displays | PDF | HTML | 2025/11/18 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency
지원되는 제품 및 하드웨어
제품
멀티 채널 IC(PMIC)
홈 시네마, 비즈니스 및 교육 DMD
휴대용 및 소비자용 DMD
UV(<420nm) DMD
Pro-AV 및 대형 공간 DMD
외부 조명 및 프로젝션 DMD
NIR(>700nm) DMD
내부 디스플레이 DMD
가시광선(420~700nm) DMD
DLP 컨트롤러 및 드라이버
하드웨어 개발
평가 보드
개발 키트
지원 소프트웨어
DLP-SERIES-323-MOUNTING — Series 323 DMD mounting and electrical interconnect information
지원되는 제품 및 하드웨어
제품
휴대용 및 소비자용 DMD
내부 디스플레이 DMD
DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES
지원되는 제품 및 하드웨어
제품
멀티 채널 IC(PMIC)
홈 시네마, 비즈니스 및 교육 DMD
휴대용 및 소비자용 DMD
UV(<420nm) DMD
Pro-AV 및 대형 공간 DMD
외부 조명 및 프로젝션 DMD
NIR(>700nm) DMD
내부 디스플레이 DMD
가시광선(420~700nm) DMD
DLP 컨트롤러 및 드라이버
하드웨어 개발
평가 보드
개발 키트
지원 소프트웨어
DLP-DLP39XX-PGU-OPT-DES — PGU Optical design for the 0.39" DMD for HUD (.zip)
지원되는 제품 및 하드웨어
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| UNKNOWN (FSC) | 154 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.