3D DMD 기계식 지오메트리
DLP-FYV-2517029-3D-DMD — DLP80xRe/Xe DMD with FYV package (series 600) 3D-CAD geometry.
This file is a 3D-CAD model of the DMD geometry for use when designing the DMD mounting
데이터 시트
DLP800XE
- 0.8-inch diagonal micromirror array
- 4K+ (3840 × 2400) display resolution
- 9.0µm micromirror pitch
- ±14.5° micromirror tilt (relative to flat surface)
- Corner illumination
- Supports high optical power density for high-brightness large venue displays
- Up to 22W/cm2 total optical power density
- 2xLVDS input data bus
- Supports 4K+ up to 60 Hz
- Laser-phosphor and RGB lasers are supported by DLPC4420 display controller, DLPA100 power management and motor driver IC
The DLP800XE digital micromirror device (DMD) is a digitally controlled micro-electromechanical system (MEMS) spatial light modulator (SLM) that enables bright 4K+ solid-state illuminated display systems. The TI DLP0.8-inch 4K+ chipset comprises the DMD, two DLPC4420 display controllers, DLPA300 micromirror driver, and DLPA100 power and motor driver. The compact physical size of the chipset provides a complete system that enables a small form factor 4K+ displays with solid-state illumination.
To help accelerate the design cycle, the DMD ecosystem includes established resources, which include production-ready optical modules, optical module manufacturers, and design houses.
To learn more about how to start designing with the DMD, visit the Getting Started with TI DLP display technology page.
기술 자료
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
1개 모두 보기 | 상위 문서 | 유형 | 직함 | 형식 옵션 | 날짜 |
|---|---|---|---|---|
| * | Data sheet | DLP800XE 0.8 4K+ Digital Micromirror Device datasheet | PDF | HTML | 2025/08/08 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
계산 툴
DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency
This calculator will be used to help customers understand how to model DMD diffraction patterns and efficiency with their specific DMD input parameters and is modeled to the customer’s specific design. Optical modules can also be used with the calculator.
지원되는 제품 및 하드웨어
DMD 장착 설계
DLP-SERIES-600-MOUNTING — Series 600 DMD mounting and electrical interconnect information
This file includes drawings and 3D-CAD models for Series 600 DMD mounting concept(s). Information is also included for the socket/interposer used to connect the DMD to a PCB.
지원되는 제품 및 하드웨어
설계 툴
DLP-OPTICAL-DESIGN — DLP-OPTICAL-DESIGN-GUIDELINES
The DLP optical design guidelines presentation provides a comprehensive overview of the guidelines specific to designing an optical system with DLP Products and will help enable customers in their design process.
지원되는 제품 및 하드웨어
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DLP-S600 (FYV) | 350 | Ultra Librarian |
주문 및 품질
포함된 정보:
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
포함된 정보:
- 팹 위치
- 조립 위치