제품 상세 정보

Component type Controller Chipset family DLP3020-Q1, DLP3030-Q1 Display resolution (max) 864 x 480 Operating temperature range (°C) -40 to 105 Rating Automotive
Component type Controller Chipset family DLP3020-Q1, DLP3030-Q1 Display resolution (max) 864 x 480 Operating temperature range (°C) -40 to 105 Rating Automotive
NFBGA (ZXS) 216 289 mm² 17 x 17
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 2: –40°C to 105°C ambient
  • Compatibility with three DMD devices:
    • DLP3030-Q1: 0.3 WVGA S450
    • DLP3020-Q1: 0.3 WVGA S247
    • DLP3021-Q1: 0.3 WVGA S247
  • Video input interface:
    • 24-bit parallel (RGB888, RGB666, or RGB565)
    • 60-Hz frame rate
    • Input resolutions from QVGA through WVGA
    • Pixel clock up to 40 MHz
  • Video processing:
    • Image scaling
    • Programmable de-gamma curve
    • Bezel adjustment
    • Horizontal and vertical image flip
  • DMD interface:
    • 78-MHz DDR DMD interface
    • Consistent DMD data loading and reset control overtemperature operating range
    • Automatic DMD parking at power-down
    • DMD temperature management
  • External memory support
    • DDR2: 312-MHz clock (624-MHz data rate)
    • Serial flash 39-MHz clock
  • System control
    • I2C communication interface
    • Programmable splash screens
    • DMD power and reset driver control
    • Programmable flash-based configuration
  • Test support
    • Built-in test pattern generator
    • JTAG with boundary scan support
  • Packaged in a 216-pin, 1.0-mm pitch BGA
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 2: –40°C to 105°C ambient
  • Compatibility with three DMD devices:
    • DLP3030-Q1: 0.3 WVGA S450
    • DLP3020-Q1: 0.3 WVGA S247
    • DLP3021-Q1: 0.3 WVGA S247
  • Video input interface:
    • 24-bit parallel (RGB888, RGB666, or RGB565)
    • 60-Hz frame rate
    • Input resolutions from QVGA through WVGA
    • Pixel clock up to 40 MHz
  • Video processing:
    • Image scaling
    • Programmable de-gamma curve
    • Bezel adjustment
    • Horizontal and vertical image flip
  • DMD interface:
    • 78-MHz DDR DMD interface
    • Consistent DMD data loading and reset control overtemperature operating range
    • Automatic DMD parking at power-down
    • DMD temperature management
  • External memory support
    • DDR2: 312-MHz clock (624-MHz data rate)
    • Serial flash 39-MHz clock
  • System control
    • I2C communication interface
    • Programmable splash screens
    • DMD power and reset driver control
    • Programmable flash-based configuration
  • Test support
    • Built-in test pattern generator
    • JTAG with boundary scan support
  • Packaged in a 216-pin, 1.0-mm pitch BGA

The DLPC120-Q1 DMD display controller for automotive applications is part of a chipset compatible with one of three digital micromirror devices (DMDs), DLP3030-Q1, DLP3020-Q1, or DLP3021-Q1. The core DLPC120-Q1 logic is responsible for accepting video input and formatting the data to display on the DMD while simultaneously controlling RGB LEDs in order to create a real-time image. The DLPC120-Q1 is also responsible for controlling the power-up and power-down events of the DMD, based on external system control or temperature input from the DMD. Combined with an external dimming circuit and microcontroller, the DLPC120-Q1 supports a wide dimming range > 5000:1 for HUD applications. Typically, the DLPC120-Q1 is a peripheral device in an I2C interface with a host processor.

The DLPC120-Q1 DMD display controller for automotive applications is part of a chipset compatible with one of three digital micromirror devices (DMDs), DLP3030-Q1, DLP3020-Q1, or DLP3021-Q1. The core DLPC120-Q1 logic is responsible for accepting video input and formatting the data to display on the DMD while simultaneously controlling RGB LEDs in order to create a real-time image. The DLPC120-Q1 is also responsible for controlling the power-up and power-down events of the DMD, based on external system control or temperature input from the DMD. Combined with an external dimming circuit and microcontroller, the DLPC120-Q1 supports a wide dimming range > 5000:1 for HUD applications. Typically, the DLPC120-Q1 is a peripheral device in an I2C interface with a host processor.

다운로드 스크립트와 함께 비디오 보기 비디오

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하세요.
6개 모두 보기
상위 문서 유형 직함 형식 옵션 날짜
* Data sheet DLPC120-Q1 Automotive DMD Controller datasheet (Rev. B) PDF | HTML 2022/05/06
White paper The Importance of a Longer VID for AR HUDs (Rev. A) PDF | HTML 2021/02/16
Application note Estimating Mechanical Volume of an Augmented Reality Head-Up Display System 2018/12/28
White paper DLP® Technology: Solar Loading in Augmented Reality Head-up Display Systems 2018/07/22
Application note DLP® Technology: Enabling the Next Generation of Automotive Head-Up Display Syst (Rev. A) 2017/11/15
White paper DLP Technology: Solving design challenges in next generation of automotive head (Rev. A) 2017/11/15

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

DLP3030PGUQ1EVM — DLP3030-Q1 PGU(Picture Generation Unit) 평가 모듈

DLP3030PGUQ1EVM 평가 모듈(EVM)은 고성능 광시야각 증강 현실 HUD(헤드업 디스플레이)를 지원하기 위해 설계된 차량용 PGU(Picture Generation Unit)입니다.   DLP3030PGUQ1EVM은 디퓨저, 광학 요소 및 LED 광원이 포함된 고성능 턴키 PGU 솔루션을 제공함으로써 개발 속도를 높이고 출시 소요 시간을 단축합니다. PGU는 HUD 개발을 지원하는 데 사용할 수 있을 뿐만 아니라 DLP 기술 성능 평가를 위한 기존 HUD 설계에 연결할 수 있습니다. 이 PGU는 DLP3030-Q1 칩셋 (...)
사용 설명서: PDF
평가 보드

DLP3030Q1EVM — DLP3030-Q1 전자 제품 평가 모듈

DLP3030Q1EVM 평가 모듈(EVM)은 DLP3030-Q1 차량용 칩셋을 구동하도록 설계된 완전한 전자 서브시스템입니다. DLP3030-Q1 칩셋은 0.3" WVGA(864 x 480) DMD 및 DLPC120-Q1 DMD 컨트롤러로 구성됩니다. 광학 장치, RGB LED 및 포토다이오드와 함께 결합된 이 EVM은 헤드업 디스플레이 또는 실내 프로젝션 시스템과 같은 애플리케이션을 위한 차량용 등급의 DLP 프로젝터 또는 이미지 생성 유닛을 개발하는 데 사용할 수 있습니다. EVM의 주요 기능 블록에는 DLP3030-Q1 (...)
사용 설명서: PDF
TI.com에서 구매할 수 없음
소프트웨어 프로그래밍 도구

DLPC106 DLPC120 Automotive Control Program Lite

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

계산 툴

DLP-HUD-LUMEN-CALC AR HUD Lumen Budget Estimation Calculator

This Excel calculator provides a starting point for estimating overall lumen requirements for the picture generation unit (PGU) in an augmented reality head-up display (AR HUD). This calculator takes standard HUD parameters as inputs, such as field of view, virtual image distance, and eyebox size. (...)
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

계산 툴

DLP-HUD-VOLUME-CALC AR HUD Volume Estimation Calculator

This Excel calculator provides a starting point for estimating overall volume for an augmented reality head-up display. This calculator takes standard HUD parameters as inputs, such as field of view, virtual image distance, and eyebox size. The calculator uses these inputs to produce an estimated (...)
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

계산 툴

DMD-DIFFRACTION-EFFICIENCY-CALCULATOR Calculator helps model DMD diffraction patterns and diffraction efficiency

This calculator will be used to help customers understand how to model DMD diffraction patterns and efficiency with their specific DMD input parameters and is modeled to the customer’s specific design. Optical modules can also be used with the calculator.
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

설계 툴

DLP-OMM-SEARCH — DLP® 제품 광학 모듈 검색 툴

To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)
설계 툴

DLP-OPTICAL-DESIGN DLP-OPTICAL-DESIGN-GUIDELINES

The DLP optical design guidelines presentation provides a comprehensive overview of the guidelines specific to designing an optical system with DLP Products and will help enable customers in their design process.
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

레퍼런스 디자인

TIDA-080004 — 증강 현실 헤드업 디스플레이용 전자 제품 및 LED 드라이버 레퍼런스 설계

이 레퍼런스 설계는 차량용 AR(증강 현실) 헤드업 디스플레이(HUD)를 구동하도록 설계된 전자 서브시스템을 제공합니다. DLP® 기술을 사용하면 밝고 선명하며 채도가 높은 헤드업 디스플레이를 통해 중요한 주행 정보를 차량의 앞 유리에 투사하여 운전자의 주의 분산을 줄이고 상황 인식 능력을 높일 수 있습니다. 이 설계되는 DLP3030-Q1 칩셋을 사용하며, 여기에는 DLP3030-Q1 0.3인치 DMD, DLPC120-Q1 차량용 DMD 컨트롤러, LED 드라이버 및 조명 컨트롤러로 작동하는 Piccolo™ (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-080006 — 405nm DL ® 오토모티브 투명 윈도우 디스플레이 전자 제품 레퍼런스 설계(0.3인치 DMD)

이 DLP3034-Q1 전자 제품 레퍼런스 설계는 유리 내부에 내장된 인광체 필름을 조명하여 투명 창 디스플레이를 만들 수 있는 DLP 프로젝터를 구동합니다. 인광체 필름은 일반적인 조건에서는 투명하지만, DLP3034-Q1 프로젝터의 405nm 조명으로 여자시키면 다채로운 디스플레이로 바뀝니다.
Design guide: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
NFBGA (ZXS) 216 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상