TPS62873-Q1
- AEC-Q100 qualified for automotive applications
- Temperature grade 1: –40°C to +125°C, TA
- Functional Safety-Capable
- 2.7V to 6V input voltage range
- 6A, 9A, 12A, 15A pin-to-pin device family
- Four output voltage ranges:
- 0.4V to 0.71875V in 1.25mV steps
- 0.4V to 1.0375V in 2.5mV steps
- 0.4V to 1.675V in 5mV steps
- 0.8V to 3.35V in 10mV steps
- Output voltage accuracy ±1%
- Differential remote sensing
- 7mΩ and 4.5mΩ internal power MOSFETs
- Adjustable external compensation
- Power-save or forced-PWM operation
- Optional synchronization to external clock or spread-spectrum operation
- I2C-compatible interface up to 1MHz
- Stackable for increased output current capability
- Thermal warning and thermal shutdown
- Active output discharge
- Power-good output with a window comparator
- Available in 2.55mm × 3.55mm × 1mm VQFN package with wettable flanks
- –40°C to 150°C junction temperature, TJ
The TPS6287x-Q1 is a family of pin-to-pin 6A, 9A, 12A, and 15A synchronous step-down DC/DC converters with differential remote sensing. For each current rating, there are full-featured device variants with I2C interface and limited-featured device variants without I2C interface. All devices offer high efficiency and ease of use. Low-resistance power switches allow up to 15A continuous output current at high ambient temperatures.
The devices can operate in stacked mode to deliver higher output currents or to spread the power dissipation across multiple devices.
The TPS6287x-Q1 family implements a fixed-frequency DCS-Control scheme that supports fast transients. The devices can operate in power save mode for maximum efficiency, or forced-PWM mode for the best transient performance and lowest output voltage ripple.
The remote sensing feature allows voltage regulation at the point-of-load, hence the device achieves better than ±1% DC voltage accuracy under all operating conditions.
The switching frequency is resistor-selectable through the FSEL pin. The switching frequency can be set to 1.5MHz, 2.25MHz, 2.5MHz, or 3.0MHz, or synchronized to an external clock in the same frequency range.
The I2C-compatible interface offers several control, monitoring, and warning features, such as voltage monitoring and temperature-related warnings. The output voltage can be quickly adjusted to adapt the power consumption of the load to the performance needs of the application through the I2C-compatible interface. The default start-up voltage is resistor-selectable through the VSEL pin.
技术文档
设计与开发
如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。
TPS62873EVM-143 — TPS62873-Q1 2.7V 至 6V 输入降压转换器评估模块
TPS62873EVM-143 评估模块 (EVM) 旨在帮助评估和测试 TPS62873-Q1 降压转换器的运行情况和功能。它还可用于评估 TPS62870-Q1、TPS62871-Q1 和 TPS62872-Q1 器件。EVM 可将 2.7V 至 6.0V 的输入电压转换为 0.75V 调节输出电压。TPS62873EVM-143 的输出电流可高达 15A。
TPS62873EVM-144 — TPS62873-Q1 30A、同步降压转换器评估模块
TPS62870x, TPS62871x, TPS62872x, TPS62873x SIMPLIS Encrypted Transient and Average Model (Rev. C)
TIPA-020000 — Mobileye EyeQ™6H 电源设计
此电源设计是我们针对 Mobileye EyeQ™6H SoC 的分立式电源树测试报告的摘要。自动驾驶辅助系统 (ADAS) 等汽车应用使用 ADAS 域控制器处理器，例如 Mobileye EyeQ™6H。这些处理器比较复杂，需要在极低的电压下提供非常高的电流。此外，还需要非常快速的输出电压瞬态响应，以应对处理器负载电流的阶跃变化。这款德州仪器 (TI) 设计以高效且具有成本效益的方式满足快速瞬态响应的严格要求。
这种分立式方法支持将负载点转换器放置在理想位置，同时仍能提供较小的设计尺寸和超小的输出电容。
多通道电压监控器用于监控所有与 SoC 相关的电源轨。电源时序可通过任何外部安全 MCU (...)
TIPA-050022 — Mobileye EQ6L 分立式电源设计
此电源设计是 TI 针对 Mobileye EyeQ6Lite® SoC 的半分立式电源树测试报告的摘要。自动驾驶辅助系统 (ADAS) 等汽车应用使用 ADAS 域控制器处理器，例如 Mobileye EyeQ6L。这些处理器比较复杂，需要在极低的电压下提供非常高的电流。此外，还需要非常快速的输出电压瞬态响应，以应对处理器负载电流的阶跃变化。
此电源设计以高效且具有成本效益的方式满足快速瞬态响应的严格要求。下面所示的半分立式方法由 PMIC 和分立式稳压器组成，可以优化负载点转换器的位置，同时仍提供小解决方案尺寸和超小的输出电容。
PMIC (...)
| 封装 | 引脚 | CAD 符号、封装和 3D 模型 |
|---|---|---|
| VQFN-FCRLF (RXS) | 16 | Ultra Librarian |
订购和质量
推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。