TPS6213013A-Q1
- DCS-Control™ topology
- Qualified for automotive applications
- Functional
Safety-Capable
- Documentation available to aid functional safety system design
- AEC-Q100 qualified with the following
results:
- Device temperature grade: –40°C to 125°C operating junction temperature range
- Device HBM ESD classification level 2
- Device CDM ESD classification level C4B
- Input voltage range: 3 to 17 V
- Adjustable output voltage from 0.9 to 6 V
- Pin-selectable output voltage (nominal, + 5%)
- Programmable soft start and tracking
- Seamless power save mode transition
- Quiescent current of 17 µA (typ.)
- Selectable operating frequency
- Power good output
- 100% Duty cycle mode
- Short circuit protection
- Overtemperature protection
- Pin-to-pin compatible with TPS62150A-Q1
- Available in a 3-mm × 3-mm, VQFN-16 package
- Create a custom design using the TPS62130A-Q1 with the WEBENCH® Power Designer
The TPS6213XA-Q1 devices are easy-to-use synchronous step-down DC-DC converters optimized for applications with high power density. A high switching frequency of typically 2.5 MHz allows the use of small inductors and provides fast transient response as well as high output-voltage accuracy through the use of the DCS-Control™ topology.
With a wide operating input-voltage range of 3 to 17 V, the devices are ideally suited for systems powered from intermediate bus power rails. The devices support up to 3-A continuous output current at output voltages between 0.9 V and 6 V (with 100% duty cycle mode). The output-voltage startup ramp is controlled by the soft-start pin, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the enable and open-drain power-good pins.
In power save mode, the devices show quiescent current of about 17 µA from VIN. Power save mode which is entered automatically and seamlessly if the load is small, maintains high efficiency over the entire load range. In shutdown mode, the devices are turned off and shutdown current consumption is less than 2 µA. The devices are packaged in a 16-pin VQFN package measuring 3 × 3 mm (RGT).
您可能感兴趣的相似产品
功能与比较器件相同且具有相同引脚。
技术文档
| 顶层文档 | 类型 | 标题 | 格式选项 | 下载最新的英语版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 数据表 | TPS6213xA-Q1 3-V to 17-V 3-A Step-Down Converter With DCS Control 数据表 (Rev. E) | 2020-5-26 | |||
| 应用手册 | Comparison of TPS629xx-Q1 vs. TPS621x0A-Q1 | PDF | HTML | 2022-12-13 | |||
| 功能安全信息 | TPS6213x-Q1 Functional Safety FIT and Failure Mode Distribution | 2020-1-27 | ||||
| 模拟设计期刊 | Methods of output-voltage adjustment for DC/DC converters | 2019-6-14 | ||||
| 模拟设计期刊 | Understanding 100% mode in low-power DC/DC converters | 2018-6-22 | ||||
| 模拟设计期刊 | Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold | 2017-10-24 | ||||
| 模拟设计期刊 | Testing tips for applying external power to supply outputs without an input voltage | 2016-10-24 |
设计与开发
如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。
TPS62130EVM-505 — 采用 3x3 mm、16 引脚 QFN 封装的 TPS62130（3A 同步降压转换器）评估模块
The TPS62130EVM-505 (HPA505-001) uses the TPS62130 adjustable version and is set to a 3.3-Voutput. The EVM operates with full-rated performance with an input voltage between 3.7 V and 17 V. The TPS62130 is a 3-A, synchronous, step-down converter in a 3x3-mm, 16-pin QFN package. Both fixed and (...)
SLVC780 — Design Tool for Output Voltage Adjustment Using a DAC
SLVC780 — Design Tool for Output Voltage Adjustment Using a DAC
TIDA-01412 — 网关和车身控制模块中的汽车微控制器电源参考设计
该分立式电源参考设计展示了 Freescale™ MPC5748G 微控制器的性能。与采用一个 PMIC 相比，本参考设计使用五个 DC/DC 转换器，可实现更高灵活性和可扩展性的设计。它支持多种汽车应用，如网关和中央车身控制模块等。
| 封装 | 引脚 | CAD 符号、封装和 3D 模型 |
|---|---|---|
| VQFN (RGT) | 16 | Ultra Librarian |
订购和质量
推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。