主页 电源管理 直流/直流开关稳压器 DC/DC converters
主页
电源管理
直流/直流开关稳压器
DC/DC converters

TPS62133A-Q1

正在供货

采用 3x3 QFN 封装的 3V 至 17V、3A 汽车类降压转换器

立即订购
数据表

TPS62133A-Q1

正在供货
数据表 立即订购

产品详情

Rating Automotive Topology Buck Iout (max) (A) 3 Vin (max) (V) 17 Vin (min) (V) 3 Vout (max) (V) 5 Vout (min) (V) 5 Features Enable, Light-load efficiency, Overcurrent protection, Power good, Prebias startup, Synchronous rectification, Tracking, Voltage Margining Control mode Constant on-time (COT), DCS-Control Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000017 Duty cycle (max) (%) 100 TI functional safety category Functional Safety-Capable
Rating Automotive Topology Buck Iout (max) (A) 3 Vin (max) (V) 17 Vin (min) (V) 3 Vout (max) (V) 5 Vout (min) (V) 5 Features Enable, Light-load efficiency, Overcurrent protection, Power good, Prebias startup, Synchronous rectification, Tracking, Voltage Margining Control mode Constant on-time (COT), DCS-Control Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000017 Duty cycle (max) (%) 100 TI functional safety category Functional Safety-Capable
VQFN (RGT) 16 9 mm² (3 mm × 3 mm)
  • DCS-Control™ topology
  • Qualified for automotive applications
  • Functional Safety-Capable
    • Documentation available to aid functional safety system design
  • AEC-Q100 qualified with the following results:
    • Device temperature grade: –40°C to 125°C operating junction temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • Input voltage range: 3 to 17 V
  • Adjustable output voltage from 0.9 to 6 V
  • Pin-selectable output voltage (nominal, + 5%)
  • Programmable soft start and tracking
  • Seamless power save mode transition
  • Quiescent current of 17 µA (typ.)
  • Selectable operating frequency
  • Power good output
  • 100% Duty cycle mode
  • Short circuit protection
  • Overtemperature protection
  • Pin-to-pin compatible with TPS62150A-Q1
  • Available in a 3-mm × 3-mm, VQFN-16 package
  • Create a custom design using the TPS62130A-Q1 with the WEBENCH® Power Designer
  • DCS-Control™ topology
  • Qualified for automotive applications
  • Functional Safety-Capable
    • Documentation available to aid functional safety system design
  • AEC-Q100 qualified with the following results:
    • Device temperature grade: –40°C to 125°C operating junction temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • Input voltage range: 3 to 17 V
  • Adjustable output voltage from 0.9 to 6 V
  • Pin-selectable output voltage (nominal, + 5%)
  • Programmable soft start and tracking
  • Seamless power save mode transition
  • Quiescent current of 17 µA (typ.)
  • Selectable operating frequency
  • Power good output
  • 100% Duty cycle mode
  • Short circuit protection
  • Overtemperature protection
  • Pin-to-pin compatible with TPS62150A-Q1
  • Available in a 3-mm × 3-mm, VQFN-16 package
  • Create a custom design using the TPS62130A-Q1 with the WEBENCH® Power Designer

The TPS6213XA-Q1 devices are easy-to-use synchronous step-down DC-DC converters optimized for applications with high power density. A high switching frequency of typically 2.5 MHz allows the use of small inductors and provides fast transient response as well as high output-voltage accuracy through the use of the DCS-Control™ topology.

With a wide operating input-voltage range of 3 to 17 V, the devices are ideally suited for systems powered from intermediate bus power rails. The devices support up to 3-A continuous output current at output voltages between 0.9 V and 6 V (with 100% duty cycle mode). The output-voltage startup ramp is controlled by the soft-start pin, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the enable and open-drain power-good pins.

In power save mode, the devices show quiescent current of about 17 µA from VIN. Power save mode which is entered automatically and seamlessly if the load is small, maintains high efficiency over the entire load range. In shutdown mode, the devices are turned off and shutdown current consumption is less than 2 µA. The devices are packaged in a 16-pin VQFN package measuring 3 × 3 mm (RGT).

The TPS6213XA-Q1 devices are easy-to-use synchronous step-down DC-DC converters optimized for applications with high power density. A high switching frequency of typically 2.5 MHz allows the use of small inductors and provides fast transient response as well as high output-voltage accuracy through the use of the DCS-Control™ topology.

With a wide operating input-voltage range of 3 to 17 V, the devices are ideally suited for systems powered from intermediate bus power rails. The devices support up to 3-A continuous output current at output voltages between 0.9 V and 6 V (with 100% duty cycle mode). The output-voltage startup ramp is controlled by the soft-start pin, which allows operation as either a standalone power supply or in tracking configurations. Power sequencing is also possible by configuring the enable and open-drain power-good pins.

In power save mode, the devices show quiescent current of about 17 µA from VIN. Power save mode which is entered automatically and seamlessly if the load is small, maintains high efficiency over the entire load range. In shutdown mode, the devices are turned off and shutdown current consumption is less than 2 µA. The devices are packaged in a 16-pin VQFN package measuring 3 × 3 mm (RGT).
filter 查找其他 DC/DC converters
下载 观看带字幕的视频 视频

您可能感兴趣的相似产品

open-in-new 比较替代产品
功能与比较器件相同且具有相同引脚。
TPS62153A-Q1 正在供货 采用 3x3 QFN 封装的 3–17V 1A 汽车类降压转换器 Pin-to-pin 1-A product with the same fixed-output voltage.
TPS62130A-Q1 正在供货 采用 3 × 3 QFN 封装的 TPS62130A-Q1 3V 至 17V 3A 汽车类降压转换器 Same product with an adjustable-output voltage.

技术文档

未找到结果。请清除搜索并重试。
查看全部 10
顶层文档 类型 标题 格式选项 下载最新的英语版本 日期
* 数据表 TPS6213xA-Q1 3-V to 17-V 3-A Step-Down Converter With DCS Control 数据表 (Rev. E) 2020-5-26
应用手册 Comparison of TPS629xx-Q1 vs. TPS621x0A-Q1 PDF | HTML 2022-12-13
功能安全信息 TPS6213x-Q1 Functional Safety FIT and Failure Mode Distribution 2020-1-27
模拟设计期刊 Understanding 100% mode in low-power DC/DC converters 2018-6-22
模拟设计期刊 Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold 2017-10-24
模拟设计期刊 Testing tips for applying external power to supply outputs without an input voltage 2016-10-24
模拟设计期刊 了解 DCS-Control™ 拓扑中的频率变化 英语版 2015-11-16
模拟设计期刊 实现降压型转换器出色 PCB 布局的五个步骤 英语版 2015-5-1
应用手册 Step-Down Converter With Input Overvoltage Protection 2014-9-4
应用手册 Step-Down Converter with Cable Voltage Drop Compensation 2014-6-26

设计与开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

评估板

TPS62130EVM-505 — 采用 3x3 mm、16 引脚 QFN 封装的 TPS62130（3A 同步降压转换器）评估模块

The TPS62130EVM-505 (HPA505-001) uses the TPS62130 adjustable version and is set to a 3.3-Voutput. The EVM operates with full-rated performance with an input voltage between 3.7 V and 17 V. The TPS62130 is a 3-A, synchronous, step-down converter in a 3x3-mm, 16-pin QFN package. Both fixed and (...)

用户指南: PDF | HTML
支持的产品和硬件
有库存
限制：
??asset.out-of-stock-ti_zh_CN??
无货
仿真模型

TPS62133A-Q1 PSpice Transient Model

SLVMAM9.ZIP (67 KB) - PSpice 模型
支持的产品和硬件
参考设计

TIDA-00271 — 用于远程摄像头和雷达模块中的 ADAS 传感器互连参考设计板

ADAS 传感器互连板专为需要将摄像头、激光雷达或雷达模块等远程传感器连接至中央处理 ECU 的应用而设计。该板支持最多 3 个同轴数据输入和 1 个 LVDS 双绞线数据输入，并配备 3 个 FMC 电缆和 1 个板对板连接器，用于向处理 ECU 传输数据。  通过同轴电缆连接器（SMB 标准）连接的摄像头或其他传感器模块，可直接通过同轴电缆（同轴供电）从互连板获取电源。由于所有板载 IC 均采用独立的完整供电方案，并支持同轴供电，因此可将单个汽车电池或类似的宽电压电源直接连接至 ADAS 传感器互连板上的电源连接器。板载 uC 和 LIN 接口能控制和配置互连板且支持即插即用操作。

支持的产品和硬件
参考设计

TIDA-01412 — 网关和车身控制模块中的汽车微控制器电源参考设计

该分立式电源参考设计展示了 Freescale™ MPC5748G 微控制器的性能。与采用一个 PMIC 相比，本参考设计使用五个 DC/DC 转换器，可实现更高灵活性和可扩展性的设计。它支持多种汽车应用，如网关和中央车身控制模块等。

支持的产品和硬件
封装 引脚 CAD 符号、封装和 3D 模型
VQFN (RGT) 16 Ultra Librarian
适用于评估类项目的 TI 标准条款与条件。

订购和质量

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

可获得 TI 工程师技术支持的 TI E2E™ 论坛

查看全部论坛主题 查看英文版全部论坛主题

所有内容均由 TI 和社区贡献者按“原样”提供，并不构成 TI 规范。请参阅使用条款。

如果您对质量、包装或订购 TI 产品有疑问，请参阅 TI 支持。​​​​​​​​​​​​​​

视频