主页 电源管理 直流/直流开关稳压器 DC/DC converters
主页
电源管理
直流/直流开关稳压器
DC/DC converters

LM65460-Q1

预发布

Automotive, 36V 6A synchronous buck converter with reduced output capacitors

立即订购
数据表

LM65460-Q1

预发布
数据表 立即订购

产品详情

Rating Automotive Topology Buck Iout (max) (A) 6 Vin (max) (V) 36 Vin (min) (V) 3 Vout (max) (V) 35 Vout (min) (V) 0.8 Features Auto Mode, Enable, Forced PWM, Frequency synchronization, Light load efficiency, Over Current Protection, Soft Start Fixed, Stackable, Synchronous Rectification, UVLO fixed, Wettable flanks package EMI & noise features Low parasitic Hotrod packaging, Spread Spectrum Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.000003 Duty cycle (max) (%) 99 TI functional safety category Functional Safety-Capable
Rating Automotive Topology Buck Iout (max) (A) 6 Vin (max) (V) 36 Vin (min) (V) 3 Vout (max) (V) 35 Vout (min) (V) 0.8 Features Auto Mode, Enable, Forced PWM, Frequency synchronization, Light load efficiency, Over Current Protection, Soft Start Fixed, Stackable, Synchronous Rectification, UVLO fixed, Wettable flanks package EMI & noise features Low parasitic Hotrod packaging, Spread Spectrum Control mode current mode Operating temperature range (°C) -40 to 150 Iq (typ) (A) 0.000003 Duty cycle (max) (%) 99 TI functional safety category Functional Safety-Capable
WQFN-FCRLF (RZT) 20 9.36 mm² (3.6 mm × 2.6 mm)
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Wide input voltage range: 3V to 36V
  • Mitigated interference and noise technology – architecture 1 (MINT 1)
    • Facilitates CISPR 25 class 5 compliance
    • ±5% dual-random spread spectrum
    • Enhanced HotRod™ QFN package with symmetrical pinout
  • Low minimum on time: 40ns (maximum)
  • Switching frequency from 300kHz to 2.2MHz
  • Pin-configurable 400kHz and 2.1MHz
  • Pin-configurable AUTO or FPWM operation
  • Dual phase capable up to 16A for high current designs
  • Pin-pin with the 65V LM656x5-Q1 family
  • High-efficiency power conversion at all loads
    • > 94.65% peak efficiency at 12VIN, 5VOUT, 400kHz
    • 3.0µA PFM no-load input current
  • High power density
    • Internal compensation, current limit, and TSD
    • 3.6mm × 2.6mm, wettable flank, 20-pin package
    • ϴJA = 24.0°C/W (LM654x0-Q1EVM)
  • Create a custom design using the LM654x0-Q1 with the WEBENCH Power Designer
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Wide input voltage range: 3V to 36V
  • Mitigated interference and noise technology – architecture 1 (MINT 1)
    • Facilitates CISPR 25 class 5 compliance
    • ±5% dual-random spread spectrum
    • Enhanced HotRod™ QFN package with symmetrical pinout
  • Low minimum on time: 40ns (maximum)
  • Switching frequency from 300kHz to 2.2MHz
  • Pin-configurable 400kHz and 2.1MHz
  • Pin-configurable AUTO or FPWM operation
  • Dual phase capable up to 16A for high current designs
  • Pin-pin with the 65V LM656x5-Q1 family
  • High-efficiency power conversion at all loads
    • > 94.65% peak efficiency at 12VIN, 5VOUT, 400kHz
    • 3.0µA PFM no-load input current
  • High power density
    • Internal compensation, current limit, and TSD
    • 3.6mm × 2.6mm, wettable flank, 20-pin package
    • ϴJA = 24.0°C/W (LM654x0-Q1EVM)
  • Create a custom design using the LM654x0-Q1 with the WEBENCH Power Designer

The LM654x0-Q1 are a family of automotive buck converters designed for high-efficiency, high-power density, and ultra-low electromagnetic interference (EMI) with mitigated interference and noise technology (MINT 1) switcher technology. The converters operate over a wide input voltage range of 3V to 36V (42V tolerant) The LM654x0-Q1 is dual phase capable by simply connecting the compensated error signal between the primary and secondary device. The LM654x0-Q1 comes with pin selectable fixed output voltages of 3.3V and 5V or in adjustable configuration. The low EMI operation is enabled with minimized loop inductance and optimized switch node slew rate. The current-mode control architecture with a 30ns typical minimum on-time allows high conversion ratios at high frequencies coupled with a fast transient response and excellent load and line regulation.

The LM654x0-Q1 are a family of automotive buck converters designed for high-efficiency, high-power density, and ultra-low electromagnetic interference (EMI) with mitigated interference and noise technology (MINT 1) switcher technology. The converters operate over a wide input voltage range of 3V to 36V (42V tolerant) The LM654x0-Q1 is dual phase capable by simply connecting the compensated error signal between the primary and secondary device. The LM654x0-Q1 comes with pin selectable fixed output voltages of 3.3V and 5V or in adjustable configuration. The low EMI operation is enabled with minimized loop inductance and optimized switch node slew rate. The current-mode control architecture with a 30ns typical minimum on-time allows high conversion ratios at high frequencies coupled with a fast transient response and excellent load and line regulation.
filter 查找其他 DC/DC converters
下载 观看带字幕的视频 视频

技术文档

未找到结果。请清除搜索并重试。
查看全部 2
顶层文档 类型 标题 格式选项 下载最新的英语版本 日期
* 数据表 LM654x0-Q1 High-Performance, Stackable Power Converter, 3V to 36V , Pin-Compatible 4A, 6A, 8A, Automotive , Low EMI With Mitigated Interference and Noise Technology (MINT) Synchronous Buck Converters 数据表 (Rev. A) PDF | HTML 2026-8-26
功能安全信息 LM654x0 and LM654x0-Q1-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2026-8-26

设计与开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

评估板

LM65460EVM — LM65460-Q1 评估板

德州仪器 (TI) LM65460EVM 评估模块 (EVM) 可帮助设计人员评估 LM654x0-Q1 系列宽输入电压降压转换器的运行情况和性能。LM654x0-Q1 是易于使用的同步降压模块系列，能够通过高达 36V 的输入电压提供高达 4A、6A 或 8A 的负载电流。

用户指南: PDF | HTML
支持的产品和硬件
有库存
限制：
??asset.out-of-stock-ti_zh_CN??
无货
封装 引脚 CAD 符号、封装和 3D 模型
WQFN-FCRLF (RZT) 20 Ultra Librarian
适用于评估类项目的 TI 标准条款与条件。

订购和质量

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

可获得 TI 工程师技术支持的 TI E2E™ 论坛

查看全部论坛主题 查看英文版全部论坛主题

所有内容均由 TI 和社区贡献者按“原样”提供，并不构成 TI 规范。请参阅使用条款。

如果您对质量、包装或订购 TI 产品有疑问，请参阅 TI 支持。​​​​​​​​​​​​​​

视频